4 Jan
2019
4 Jan
'19
1:12 p.m.
Hi All,
I am using kamailio 5.0, one question is: is there any one make it works to send rx_aar
for origin calls? That's when we receive the INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to send AAR when we receive INVITE
for origin and send AAR when we receive 200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply
QoS if its not a reply to an INVITE! or UPDATE or PRACK!
Thanks,
Victor
7 Jan
7 Jan
1:35 p.m.
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one make it
works to send rx_aar for origin calls? That’s when we receive the
INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to send AAR
when we receive INVITE for origin and send AAR when we receive 200 OK
for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or UPDATE or PRACK!
indeed, the code seems to restrict the use of the function for replies,
although the export of the function lists request_route as an allowed block.
I see that the function is used in the IMS config examples, maybe is
useful to look at them and see if you can adjust your configs in a
similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch the source
and try remove the condition on type being SIP_REPLY, maybe it just
works afterwards ... if not, you can open an issue on bug tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com
2:07 p.m.
Hi Daniel,
Thanks for your reply.
I had tried the mo.cfg and try to comments the lines in ims_mod.c that not allow send AAR
for a request(INVITE), it not works.
Our request is when kamailio receive 200OK for INNVITE, it will send AAR for term and AAR
for origin to setup the gate sessions.
Could you point the link to open bugs? I tried to create an account on Github, it always
hung there to validate the account state?
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda(a)gmail.com>
Sent: 2019年1月7日 16:36
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; Lv, Victor
(NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one make it works to send rx_aar
for origin calls? That’s when we receive the INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to send AAR when we receive INVITE
for origin and send AAR when we receive 200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or UPDATE or PRACK!
indeed, the code seems to restrict the use of the function for replies, although the
export of the function lists request_route as an allowed block.
I see that the function is used in the IMS config examples, maybe is useful to look at
them and see if you can adjust your configs in a similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch the source and try remove the
condition on type being SIP_REPLY, maybe it just works afterwards ... if not, you can open
an issue on bug tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
6:23 p.m.
Hello,
the bug tracker is on https://github.com/kamailio/kamilio, there is an
issue tab for it.
Making accounts on github is not under our control, but I haven't heard
of people having troubles with it. Have you checked you spam folder?
Iirc, it sends a confirmation email when creating the account. if you
tried with your corporate email address, maybe it is blocked by some
filter in the server, try with an account from a "free" email provider
just to see if works fine.
Cheers,
Daniel
On 07.01.19 10:07, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your reply.
I had tried the mo.cfg and try to comments the lines in ims_mod.c that
not allow send AAR for a request(INVITE), it not works.
Our request is when kamailio receive 200OK for INNVITE, it will send
AAR for term and AAR for origin to setup the gate sessions.
Could you point the link to open bugs? I tried to create an account on
Github, it always hung there to validate the account state?
Thanks,
Victor
*From:*Daniel-Constantin Mierla <miconda(a)gmail.com>
*Sent:* 2019年1月7日16:36
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org>rg>; Lv, Victor (NSB - CN/Qingdao)
<victor.lv(a)nokia-sbell.com>
*Subject:* Re: [SR-Users] kamailio 5.0 questions
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one make it
works to send rx_aar for origin calls? That’s when we receive the
INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to send
AAR when we receive INVITE for origin and send AAR when we receive
200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or UPDATE or
PRACK!
indeed, the code seems to restrict the use of the function for
replies, although the export of the function lists request_route as an
allowed block.
I see that the function is used in the IMS config examples, maybe is
useful to look at them and see if you can adjust your configs in a
similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch the
source and try remove the condition on type being SIP_REPLY, maybe it
just works afterwards ... if not, you can open an issue on bug tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019,
in Washington, DC, USA -- www.asipto.com <http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com
8 Jan
8 Jan
6:50 a.m.
Hi Daniel,
Thanks for your info.
By the way, is kamailo support performance test? Such as run sock test 72 hours? Have we
verified the functionality?
I created a ticket for this request.
kamailio can't support send Rx_AAR for origin call #1793
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda(a)gmail.com>
Sent: 2019年1月7日 21:24
To: Lv, Victor (NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>om>; Kamailio (SER) -
Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
the bug tracker is on https://github.com/kamailio/kamilio, there is an issue tab for it.
Making accounts on github is not under our control, but I haven't heard of people
having troubles with it. Have you checked you spam folder? Iirc, it sends a confirmation
email when creating the account. if you tried with your corporate email address, maybe it
is blocked by some filter in the server, try with an account from a "free" email
provider just to see if works fine.
Cheers,
Daniel
On 07.01.19 10:07, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your reply.
I had tried the mo.cfg and try to comments the lines in ims_mod.c that not allow send AAR
for a request(INVITE), it not works.
Our request is when kamailio receive 200OK for INNVITE, it will send AAR for term and AAR
for origin to setup the gate sessions.
Could you point the link to open bugs? I tried to create an account on Github, it always
hung there to validate the account state?
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda@gmail.com><mailto:miconda@gmail.com>
Sent: 2019年1月7日 16:36
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>; Lv, Victor
(NSB - CN/Qingdao)
<victor.lv@nokia-sbell.com><mailto:victor.lv@nokia-sbell.com>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one make it works to send rx_aar
for origin calls? That’s when we receive the INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to send AAR when we receive INVITE
for origin and send AAR when we receive 200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or UPDATE or PRACK!
indeed, the code seems to restrict the use of the function for replies, although the
export of the function lists request_route as an allowed block.
I see that the function is used in the IMS config examples, maybe is useful to look at
them and see if you can adjust your configs in a similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch the source and try remove the
condition on type being SIP_REPLY, maybe it just works afterwards ... if not, you can open
an issue on bug tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
1:10 p.m.
Am Dienstag, 8. Januar 2019, 02:50:25 CET schrieb Lv, Victor (NSB - CN/>
Thanks for your info.
By the way, is kamailo support performance test? Such as run sock test 72
hours? Have we verified the functionality?
I created a ticket for this request.
kamailio can't support send Rx_AAR for origin call #1793
Hello Victor,
Kamailio does (of course) support performance tests, you can run this as long
as you want.
Best regards,
Henning
--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://skalatan.de/services
Kamailio security assessment - https://skalatan.de/de/assessment
1:17 p.m.
Thanks Henning's confirmation.
-----Original Message-----
From: Henning Westerholt <hw(a)kamailio.org>
Sent: 2019年1月8日 16:10
To: sr-users(a)lists.kamailio.org
Cc: Lv, Victor (NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>om>; miconda(a)gmail.com
Subject: Re: [SR-Users] kamailio 5.0 questions
Am Dienstag, 8. Januar 2019, 02:50:25 CET schrieb Lv, Victor (NSB - CN/> Thanks for
your info.
By the way, is kamailo support performance test? Such as run sock test
72 hours? Have we verified the functionality?
I created a ticket for this request.
kamailio can't support send Rx_AAR for origin call #1793
Hello Victor,
Kamailio does (of course) support performance tests, you can run this as long as you
want.
Best regards,
Henning
--
Henning Westerholt - https://skalatan.de/blog/ Kamailio services -
https://skalatan.de/services Kamailio security assessment -
https://skalatan.de/de/assessment
3:43 p.m.
Hello,
I am curious about what you mean with "run sock test 72 hours"? What and
how is supposed to be tested there?
Cheers,
Daniel
On 08.01.19 02:50, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your info.
By the way, is kamailo support performance test? Such as run sock test
72 hours? Have we verified the functionality?
I created a ticket for this request.
*kamailio can't support send Rx_AAR for origin call **#1793*
Thanks,
Victor
*From:*Daniel-Constantin Mierla <miconda(a)gmail.com>
*Sent:* 2019年1月7日21:24
*To:* Lv, Victor (NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>om>;
Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] kamailio 5.0 questions
Hello,
the bug tracker is on https://github.com/kamailio/kamilio
<https://github.com/kamailio/kamilio>, there is an issue tab for it.
Making accounts on github is not under our control, but I haven't
heard of people having troubles with it. Have you checked you spam
folder? Iirc, it sends a confirmation email when creating the account.
if you tried with your corporate email address, maybe it is blocked by
some filter in the server, try with an account from a "free" email
provider just to see if works fine.
Cheers,
Daniel
On 07.01.19 10:07, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your reply.
I had tried the mo.cfg and try to comments the lines in ims_mod.c
that not allow send AAR for a request(INVITE), it not works.
Our request is when kamailio receive 200OK for INNVITE, it will
send AAR for term and AAR for origin to setup the gate sessions.
Could you point the link to open bugs? I tried to create an
account on Github, it always hung there to validate the account state?
Thanks,
Victor
*From:*Daniel-Constantin Mierla <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Sent:* 2019年1月7日16:36
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>; Lv, Victor (NSB -
CN/Qingdao) <victor.lv(a)nokia-sbell.com>
<mailto:victor.lv@nokia-sbell.com>
*Subject:* Re: [SR-Users] kamailio 5.0 questions
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one
make it works to send rx_aar for origin calls? That’s when we
receive the INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to
send AAR when we receive INVITE for origin and send AAR when
we receive 200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or UPDATE
or PRACK!
indeed, the code seems to restrict the use of the function for
replies, although the export of the function lists request_route
as an allowed block.
I see that the function is used in the IMS config examples, maybe
is useful to look at them and see if you can adjust your configs
in a similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch the
source and try remove the condition on type being SIP_REPLY, maybe
it just works afterwards ... if not, you can open an issue on bug
tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27,
2019, in Washington, DC, USA -- www.asipto.com <http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019,
in Washington, DC, USA -- www.asipto.com <http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com
9 Jan
9 Jan
6:07 a.m.
Hello Daniel,
Run sock test 72 hours means with hundreds of phones to make calls and hang up last 72
hours.
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda(a)gmail.com>
Sent: 2019年1月8日 18:43
To: Lv, Victor (NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>om>; Kamailio (SER) -
Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
I am curious about what you mean with "run sock test 72 hours"? What and how is
supposed to be tested there?
Cheers,
Daniel
On 08.01.19 02:50, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your info.
By the way, is kamailo support performance test? Such as run sock test 72 hours? Have we
verified the functionality?
I created a ticket for this request.
kamailio can't support send Rx_AAR for origin call #1793
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda@gmail.com><mailto:miconda@gmail.com>
Sent: 2019年1月7日 21:24
To: Lv, Victor (NSB - CN/Qingdao)
<victor.lv@nokia-sbell.com><mailto:victor.lv@nokia-sbell.com>; Kamailio (SER)
- Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
the bug tracker is on https://github.com/kamailio/kamilio, there is an issue tab for it.
Making accounts on github is not under our control, but I haven't heard of people
having troubles with it. Have you checked you spam folder? Iirc, it sends a confirmation
email when creating the account. if you tried with your corporate email address, maybe it
is blocked by some filter in the server, try with an account from a "free" email
provider just to see if works fine.
Cheers,
Daniel
On 07.01.19 10:07, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your reply.
I had tried the mo.cfg and try to comments the lines in ims_mod.c that not allow send AAR
for a request(INVITE), it not works.
Our request is when kamailio receive 200OK for INNVITE, it will send AAR for term and AAR
for origin to setup the gate sessions.
Could you point the link to open bugs? I tried to create an account on Github, it always
hung there to validate the account state?
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda@gmail.com><mailto:miconda@gmail.com>
Sent: 2019年1月7日 16:36
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>; Lv, Victor
(NSB - CN/Qingdao)
<victor.lv@nokia-sbell.com><mailto:victor.lv@nokia-sbell.com>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one make it works to send rx_aar
for origin calls? That’s when we receive the INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to send AAR when we receive INVITE
for origin and send AAR when we receive 200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or UPDATE or PRACK!
indeed, the code seems to restrict the use of the function for replies, although the
export of the function lists request_route as an allowed block.
I see that the function is used in the IMS config examples, maybe is useful to look at
them and see if you can adjust your configs in a similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch the source and try remove the
condition on type being SIP_REPLY, maybe it just works afterwards ... if not, you can open
an issue on bug tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
12:40 p.m.
Hello,
never heard before the term "sock test" for testing with calls. I
thought it is something specific to lower level of network sockets ...
Cheers,
Daniel
On 09.01.19 02:07, Lv, Victor (NSB - CN/Qingdao) wrote:
Hello Daniel,
Run sock test 72 hours means with hundreds of phones to make calls and
hang up last 72 hours.
Thanks,
Victor
*From:*Daniel-Constantin Mierla <miconda(a)gmail.com>
*Sent:* 2019年1月8日18:43
*To:* Lv, Victor (NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>om>;
Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] kamailio 5.0 questions
Hello,
I am curious about what you mean with "run sock test 72 hours"? What
and how is supposed to be tested there?
Cheers,
Daniel
On 08.01.19 02:50, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your info.
By the way, is kamailo support performance test? Such as run sock
test 72 hours? Have we verified the functionality?
I created a ticket for this request.
*kamailio can't support send Rx_AAR for origin call **#1793*
Thanks,
Victor
*From:*Daniel-Constantin Mierla <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Sent:* 2019年1月7日21:24
*To:* Lv, Victor (NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>
<mailto:victor.lv@nokia-sbell.com>; Kamailio (SER) - Users Mailing
List <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject:* Re: [SR-Users] kamailio 5.0 questions
Hello,
the bug tracker is on https://github.com/kamailio/kamilio
<https://github.com/kamailio/kamilio>, there is an issue tab for it.
Making accounts on github is not under our control, but I haven't
heard of people having troubles with it. Have you checked you spam
folder? Iirc, it sends a confirmation email when creating the
account. if you tried with your corporate email address, maybe it
is blocked by some filter in the server, try with an account from
a "free" email provider just to see if works fine.
Cheers,
Daniel
On 07.01.19 10:07, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your reply.
I had tried the mo.cfg and try to comments the lines in
ims_mod.c that not allow send AAR for a request(INVITE), it
not works.
Our request is when kamailio receive 200OK for INNVITE, it
will send AAR for term and AAR for origin to setup the gate
sessions.
Could you point the link to open bugs? I tried to create an
account on Github, it always hung there to validate the
account state?
Thanks,
Victor
*From:*Daniel-Constantin Mierla <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Sent:* 2019年1月7日16:36
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>; Lv, Victor (NSB -
CN/Qingdao) <victor.lv(a)nokia-sbell.com>
<mailto:victor.lv@nokia-sbell.com>
*Subject:* Re: [SR-Users] kamailio 5.0 questions
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one
make it works to send rx_aar for origin calls? That’s when
we receive the INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to
send AAR when we receive INVITE for origin and send AAR
when we receive 200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or
UPDATE or PRACK!
indeed, the code seems to restrict the use of the function for
replies, although the export of the function lists
request_route as an allowed block.
I see that the function is used in the IMS config examples,
maybe is useful to look at them and see if you can adjust your
configs in a similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch
the source and try remove the condition on type being
SIP_REPLY, maybe it just works afterwards ... if not, you can
open an issue on bug tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com <http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar
25-27, 2019, in Washington, DC, USA -- www.asipto.com
<http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27,
2019, in Washington, DC, USA -- www.asipto.com <http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019,
in Washington, DC, USA -- www.asipto.com <http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com
12:56 p.m.
Hello,
I run kamailio about 6 month without restart or any crash. it is up to your configuration
and your environment.
Best regards
Yasin CANER
________________________________
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Lv, Victor (NSB -
CN/Qingdao) <victor.lv(a)nokia-sbell.com>
Sent: Wednesday, January 9, 2019 4:07 AM
To: miconda(a)gmail.com; Kamailio (SER) - Users Mailing List
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello Daniel,
Run sock test 72 hours means with hundreds of phones to make calls and hang up last 72
hours.
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda(a)gmail.com>
Sent: 2019年1月8日 18:43
To: Lv, Victor (NSB - CN/Qingdao) <victor.lv(a)nokia-sbell.com>om>; Kamailio (SER) -
Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
I am curious about what you mean with "run sock test 72 hours"? What and how is
supposed to be tested there?
Cheers,
Daniel
On 08.01.19 02:50, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your info.
By the way, is kamailo support performance test? Such as run sock test 72 hours? Have we
verified the functionality?
I created a ticket for this request.
kamailio can't support send Rx_AAR for origin call #1793
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda@gmail.com><mailto:miconda@gmail.com>
Sent: 2019年1月7日 21:24
To: Lv, Victor (NSB - CN/Qingdao)
<victor.lv@nokia-sbell.com><mailto:victor.lv@nokia-sbell.com>; Kamailio (SER)
- Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
the bug tracker is on https://github.com/kamailio/kamilio, there is an issue tab for it.
Making accounts on github is not under our control, but I haven't heard of people
having troubles with it. Have you checked you spam folder? Iirc, it sends a confirmation
email when creating the account. if you tried with your corporate email address, maybe it
is blocked by some filter in the server, try with an account from a "free" email
provider just to see if works fine.
Cheers,
Daniel
On 07.01.19 10:07, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi Daniel,
Thanks for your reply.
I had tried the mo.cfg and try to comments the lines in ims_mod.c that not allow send AAR
for a request(INVITE), it not works.
Our request is when kamailio receive 200OK for INNVITE, it will send AAR for term and AAR
for origin to setup the gate sessions.
Could you point the link to open bugs? I tried to create an account on Github, it always
hung there to validate the account state?
Thanks,
Victor
From: Daniel-Constantin Mierla <miconda@gmail.com><mailto:miconda@gmail.com>
Sent: 2019年1月7日 16:36
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>; Lv, Victor
(NSB - CN/Qingdao)
<victor.lv@nokia-sbell.com><mailto:victor.lv@nokia-sbell.com>
Subject: Re: [SR-Users] kamailio 5.0 questions
Hello,
On 04.01.19 09:12, Lv, Victor (NSB - CN/Qingdao) wrote:
Hi All,
I am using kamailio 5.0, one question is: is there any one make it works to send rx_aar
for origin calls? That’s when we receive the INVITE message and send out rx_aar?
Below link not work when receive INVITE message, I need to send AAR when we receive INVITE
for origin and send AAR when we receive 200 OK for term?
Rx_AAR("MT_aar_reply", "origin","",2);
From code, we got below comments.
//we dont apply QoS if its not a reply to an INVITE! or UPDATE or PRACK!
indeed, the code seems to restrict the use of the function for replies, although the
export of the function lists request_route as an allowed block.
I see that the function is used in the IMS config examples, maybe is useful to look at
them and see if you can adjust your configs in a similar way:
- misc/examples/ims/pcscf/route/mt.cfg
- misc/examples/ims/pcscf/route/mo.cfg
If you strictly need it for requests, then you have to patch the source and try remove the
condition on type being SIP_REPLY, maybe it just works afterwards ... if not, you can open
an issue on bug tracker.
Cheers,
Daniel
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 --
www.kamailioworld.com<http://www.kamailioworld.com>
Kamailio Advanced Training - Mar 4-6, 2019 in Berlin; Mar 25-27, 2019, in Washington, DC,
USA -- www.asipto.com<http://www.asipto.com>
1943
days inactive
1948
days old
10 comments
4 participants
participants (4)
-
Daniel-Constantin Mierla -
Henning Westerholt -
Lv, Victor (NSB - CN/Qingdao) -
YAS0 CANER