28 May
2004
28 May
'04
9:14 p.m.
My home lan:
cable modem-->routre(192.168.0.1): one linux
(192.168.0.123) and one windows(192.168.0.124)
I have installe ser in linux machine and I can use
xten lite(UA) register with ser, but my friend can't
register his xten to my ser using my public ip from
cable company. I have configure my route with ser
vitual server. and serctl ps shows 192.168.0.123:5060
is listening.. why my friend can't register to my ser.
please help!
by the way, I am new to ser, if some one want to share
ser experience, please call me anytime use my
FreeWorldDealup 395104.
Peter
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
28 May
28 May
10:34 p.m.
This scenario is really complex and it is hard to succed!
Try to setup the proxy in the public Internet with a public IP.
regards,
klaus
Peter Liu wrote:
My home lan:
cable modem-->routre(192.168.0.1): one linux
(192.168.0.123) and one windows(192.168.0.124)
I have installe ser in linux machine and I can use
xten lite(UA) register with ser, but my friend can't
register his xten to my ser using my public ip from
cable company. I have configure my route with ser
vitual server. and serctl ps shows 192.168.0.123:5060
is listening.. why my friend can't register to my ser.
please help!
by the way, I am new to ser, if some one want to share
ser experience, please call me anytime use my
FreeWorldDealup 395104.
Peter
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
29 May
29 May
2:40 a.m.
Like Klaus said, it is quite difficult to set this up in a NAT environment.
The reason you can't do that is because SIP protocol is not just a transport
over IP. There are routing information inside the SIP message. In you case,
your SER will insert a line like
Record-Route: <sip:192.168.0.123;ftag=....> which the upstream (or
downstream, I can't remember) does not know how to reach in subsequence
messages.
By saying that, it doesn't mean you can't achieve it. You need the mangler
module to start with. I've spent several weeks on this but is only 30-40%
complete. Eventually, I gave up as the cost (time for development,
troubleshooting and ongoing support) on putting up such solution well
exceeded the cost of purchasing an extra IP block from the ISP.
Zeus
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On Behalf Of Klaus Darilion
Sent: Saturday, 29 May 2004 6:35 AM
To: Peter Liu
Cc: serusers(a)lists.iptel.org
Subject: Re: [Serusers] ser behind firewall?
This scenario is really complex and it is hard to succed!
Try to setup the proxy in the public Internet with a public IP.
regards,
klaus
Peter Liu wrote:
My home lan:
cable modem-->routre(192.168.0.1): one linux
(192.168.0.123) and one windows(192.168.0.124)
I have installe ser in linux machine and I can use
xten lite(UA) register with ser, but my friend can't
register his xten to my ser using my public ip from
cable company. I have configure my route with ser
vitual server. and serctl ps shows 192.168.0.123:5060
is listening.. why my friend can't register to my ser.
please help!
by the way, I am new to ser, if some one want to share
ser experience, please call me anytime use my
FreeWorldDealup 395104.
Peter
__________________________________
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
7278
days inactive
7279
days old
2 comments
3 participants
participants (3)
-
Klaus Darilion -
Peter Liu -
Zeus Ng