I am beginning to think that maybe Ser is working, but not getting the calls
to the Cisco 5350. Is there anything else I need to do to get this working?
AJ Grinnell
Network Operations Technician
CRT/ Arialink Broadband
1223 Turner Street, Suite A
Lansing, MI 48906
517.346.5041
517.492.1321 direct
-----Original Message-----
From: Steve Blair [mailto:blairs@isc.upenn.edu]
Sent: Tuesday, June 15, 2004 12:47 PM
To: AJ Grinnell
Subject: Re: [Serusers] No outgoing calls
Oh, ok. I assumed that was the case but it wasn't clear from
the configuration data.
_Steve
AJ Grinnell wrote:
I am listening on x.x.x.x, which is a public IP
AJ Grinnell
Network Operations Technician
CRT/ Arialink Broadband
1223 Turner Street, Suite A
Lansing, MI 48906
517.346.5041
517.492.1321 direct
-----Original Message-----
From: Steve Blair [mailto:blairs@isc.upenn.edu]
Sent: Tuesday, June 15, 2004 11:56 AM
To: AJ Grinnell
Subject: Re: [Serusers] No outgoing calls
Well you need to indicate what address you are listen on. From
the config you sent it appears as if you are only listening on the
loopback address.
AJ Grinnell wrote:
This is where i am getting lost. I am listening on
the loopback, but also
on
>a public IP. I really dont know if my statements are correct, I am piecing
>together various bits here and there. This is all greek to me right now.
>
>AJ Grinnell
>Network Operations Technician
>CRT/ Arialink Broadband
>1223 Turner Street, Suite A
>Lansing, MI 48906
>517.346.5041
>517.492.1321 direct
>
>
>-----Original Message-----
>From: Steve Blair [mailto:blairs@isc.upenn.edu]
>Sent: Tuesday, June 15, 2004 10:55 AM
>To: AJ Grinnell
>Subject: Re: [Serusers] No outgoing calls
> So what does your logging and ngrep output show? I see your listening
>on the loopback address. This may be correct but I have never seen
>it before. Do you really want to listen on that address? Also is the
>regular expression in the "native SIP destinations..." if statement being
>matched? If not I'd check what domain your UAs are register with
>and rewrite both the alias statement and regular expression as needed.
>
>-Steve
>
>AJ Grinnell wrote:
>
>
>>Can someone please help with this. We are switching from using Asterisk
by
>itself to
using Ser w/ Asterisk. As it stands now, I can not make any
>outgoing calls, authentication is not working, and I am about to give up
>
>
on
Ser. I
know that Ser is a great server, but my configuration is not going
well at all. Below is my config. All I want to do for now is just be able
to
>make outgoing calls, and maybe even recieve a call or two by the end of
>
>
the
>day. What am I doing wrong here? Help?
>
># ----------- global configuration parameters ------------------------
>
>#debug=3 # debug level (cmd line: -dddddddddd)
>#fork=yes
>#log_stderror=no # (cmd line: -E)
>
>listen=x.x.x.x
>listen=127.0.0.1
>alias=x.x.x.x
>alias=x.x.x.x
>
>check_via=yes # (cmd. line: -v)
>dns=no # (cmd. line: -r)
>rev_dns=no # (cmd. line: -R)
>port=5060
>children=4
>fifo="/tmp/ser_fifo"
>sip_warning=yes
>syn_branch=no
>server_signature=yes
>reply_to_via=no
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/lib/ser/modules/mysql.so"
>loadmodule "/etc/lib/ser/modules/sl.so"
>loadmodule "/etc/lib/ser/modules/tm.so"
>loadmodule "/etc/lib/ser/modules/rr.so"
>loadmodule "/etc/lib/ser/modules/maxfwd.so"
>loadmodule "/etc/lib/ser/modules/usrloc.so"
>loadmodule "/etc/lib/ser/modules/registrar.so"
>loadmodule "/etc/lib/ser/modules/auth.so"
>loadmodule "/etc/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific parameters ---------------
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode", 0)
>modparam("usrloc", "db_mode", 2)
>modparam("auth_db", "db_url",
"sql://ser:heslo@localhost/ser")
>
># -- auth params --
>modparam("auth_db", "db_url",
"sql://ser:heslo@localhost/ser")
>modparam("auth_db", "calculate_ha1", yes)
>modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>modparam("rr", "enable_full_lr", 1)
>
># ------------------------- request routing logic -------------------
>
># main routing logic
>
>route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
># Uncomment this if you want to use digest authentication
># if (!www_authorize("arialink.com",
"subscriber"))
>
>
{
#
www_challenge("arialink.com", "0");
# break;
# };
save("location");
break;
};
## native SIP destinations are handled using our USRLOC DB
if (uri=~"^sip:9742146@.*") {
# attempt handoff to PSTN.
log( "Forwarding to PSTN\n" );
rewritehostport( "x.x.x.x:5060" );
forward(uri:host, uri:port);
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
AJ Grinnell
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-7903
fax: 215-898-9348
sip:blairs@upenn.edu
--
This message has been scanned by Arialink for dangerous content and is
believed to be clean. For more information please email
support(a)arialink.com
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-7903
fax: 215-898-9348
sip:blairs@upenn.edu
--
This message has been scanned by Arialink for dangerous content and is
believed to be clean. For more information please email
support(a)arialink.com
--
ISC Network Engineering
The University of Pennsylvania
3401 Walnut Street, Suite 221A
Philadelphia, PA 19104
voice: 215-573-8396
215-746-7903
fax: 215-898-9348
sip:blairs@upenn.edu
--
This message has been scanned by Arialink for dangerous content and is
believed to be clean. For more information please email support(a)arialink.com