6 May
2018
6 May
'18
8:12 p.m.
Hello all,
Does anyone know the current status of how to enable STUN. I am using Kamailio Ver 5.x.
Thank you,
-Steve
6 May
6 May
8:48 p.m.
Simple, load the stun module then point the device' stun address to your
kamailio host on port 5060 (or whatever SIP listening port is configured)
On Sun, May 6, 2018 at 11:12 AM, Wilkins, Steve <swwilkins(a)mitre.org> wrote:
Hello all,
Does anyone know the current status of how to enable STUN. I am using
Kamailio Ver 5.x.
Thank you,
-Steve
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
7 May
7 May
1:29 p.m.
Hello,
You could run STUN server on the same server that Kamailio is running,
It is very straightforward.
Just donload STUNTMAN ,An open source STUN server - Version 1.2.7, and
read README file.
Alternative, Opensips has build-in STUN module, You could use it,too
With Regards.Mojtaba
On Sun, May 6, 2018 at 8:18 PM, Sergiu Pojoga <pojogas(a)gmail.com> wrote:
Simple, load the stun module then point the
device' stun address to your
kamailio host on port 5060 (or whatever SIP listening port is configured)
On Sun, May 6, 2018 at 11:12 AM, Wilkins, Steve <swwilkins(a)mitre.org> wrote:
--
--Mojtaba Esfandiari.S
Hello all,
Does anyone know the current status of how to enable STUN. I am using
Kamailio Ver 5.x.
Thank you,
-Steve
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2:02 p.m.
Hi,
Let me explain a bit the STUN server in kamailio is for SIP signaling to
help resolve NAT issues related to SIP over UDP for SIP clients. While a
separate / 3rd party STUN server is mostly useful for NAT issues related to
media problems.
Thank you.
On Mon, 7 May 2018 at 10:33, Mojtaba <mespio(a)gmail.com> wrote:
Hello,
You could run STUN server on the same server that Kamailio is running,
It is very straightforward.
Just donload STUNTMAN ,An open source STUN server - Version 1.2.7, and
read README file.
Alternative, Opensips has build-in STUN module, You could use it,too
With Regards.Mojtaba
On Sun, May 6, 2018 at 8:18 PM, Sergiu Pojoga <pojogas(a)gmail.com> wrote:
--
--Mojtaba Esfandiari.S
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Simple, load the stun module then point the
device' stun address to your
kamailio host on port 5060 (or whatever SIP listening port is configured)
On Sun, May 6, 2018 at 11:12 AM, Wilkins, Steve <swwilkins(a)mitre.org>
wrote:
Hello all,
Does anyone know the current status of how to enable STUN. I am using
Kamailio Ver 5.x.
Thank you,
-Steve
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
5:59 p.m.
So If I already have a Stun Server, I don’t need to configure Kamailio to use that
Server…Is that correct?
Thank you
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Sergiu Pojoga
Sent: Sunday, May 6, 2018 11:49 AM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] STUN
Simple, load the stun module then point the device' stun address to your kamailio host
on port 5060 (or whatever SIP listening port is configured)
On Sun, May 6, 2018 at 11:12 AM, Wilkins, Steve
<swwilkins@mitre.org<mailto:swwilkins@mitre.org>> wrote:
Hello all,
Does anyone know the current status of how to enable STUN. I am using Kamailio Ver 5.x.
Thank you,
-Steve
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8 May
8 May
9:26 a.m.
No; STUN, by its nature, is a client-side solution.
On Mon, May 07, 2018 at 12:59:49PM +0000, Wilkins, Steve wrote:
So If I already have a Stun Server, I don’t need to
configure Kamailio to use that Server…Is that correct?
Thank you
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of Sergiu Pojoga
Sent: Sunday, May 6, 2018 11:49 AM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] STUN
Simple, load the stun module then point the device' stun address to your kamailio
host on port 5060 (or whatever SIP listening port is configured)
On Sun, May 6, 2018 at 11:12 AM, Wilkins, Steve
<swwilkins@mitre.org<mailto:swwilkins@mitre.org>> wrote:
Hello all,
Does anyone know the current status of how to enable STUN. I am using Kamailio Ver 5.x.
Thank you,
-Steve
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
9:36 a.m.
The STUN solutions for NAT traversal is classified as near-end.This
solutions implemented on the client-side, Then you don't need to
configure kamailio.
Be notice only the TURN solution is used on server-side. The TURN
solution needs some configurations in Kamailio.
With Regards.Mojtaba
On Mon, May 7, 2018 at 5:29 PM, Wilkins, Steve <swwilkins(a)mitre.org> wrote:
So If I already have a Stun Server, I don’t need to
configure Kamailio to
use that Server…Is that correct?
Thank you
From: sr-users [mailto:sr-users-bounces@lists.kamailio.org] On Behalf Of
Sergiu Pojoga
Sent: Sunday, May 6, 2018 11:49 AM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] STUN
Simple, load the stun module then point the device' stun address to your
kamailio host on port 5060 (or whatever SIP listening port is configured)
On Sun, May 6, 2018 at 11:12 AM, Wilkins, Steve <swwilkins(a)mitre.org> wrote:
Hello all,
Does anyone know the current status of how to enable STUN. I am using
Kamailio Ver 5.x.
Thank you,
-Steve
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
--Mojtaba Esfandiari.S
2200
days inactive
2202
days old
6 comments
5 participants
participants (5)
-
Alex Balashov -
M S -
Mojtaba -
Sergiu Pojoga -
Wilkins, Steve