Hi fellow kamailio users, I'm playing actually with t_on_branch_failure, in a simultaneous forking scenario ( lookup("location") returns multiple contacts ). Any idea on how to get those "on_branch_failure" working ? Thanks in Advance ! * Test by putting failure_exec_mode: - at 1 => no branch failure being called, never. - at 0 => t_relay does not fail if a single branch answers the transaction, even if all other branches are failing. * Test by moving the t_on_branch_failure("manage_branch_failure"); line before or after the lookup("location") or on a _on_branch route to set it per branch. - The on_route branch are executed, but never the failure one. - tried also with failure_exec_mode = 0 or 1. * Using set_forward_no_connect, I can see in the logs a "Sending to branch X failed" but no failure route being executed. Without it, nothing in the logs indicating that the branch has timeout. * Config extract: # auto-discard branches from previous serial forking leg modparam("tm", "failure_reply_mode", 3) # 3 by default # default retransmission timeout: 30sec modparam("tm", "fr_timer", 30000) # default invite retransmission timeout after 1xx: 120sec modparam("tm", "fr_inv_timer", 120000) modparam("tm", "reparse_on_dns_failover", 0) # 1: Allow branches to have a per branch failure route # 0: t_relay should fail if a branch fail modparam("tm", "failure_exec_mode", 1) # Allow locally generated 408 to be forgotten in case a reply is received. #modparam("tm", "faked_reply_prio", 2000) # USER location service route[LOCATION] { t_on_branch_failure("manage_branch_failure"); if (!lookup("location")) { .... } # Let's get back after 2.5s if no 100/Trying received. t_set_fr(0, 2500); # set_forward_no_connect(); #t_on_branch("SET_BRANCH_FAILURE"); route(RELAY); exit; } route[RELAY] { .... if (!t_relay()) { xlog("L_WARN","$rm|$ci|$fu|$tu|RELAY_FAILED"); sl_reply_error(); } exit(); } # set failure route per branch branch_route[SET_BRANCH_FAILURE] { xlog("L_WARN","$rm|$ci|$fu|$tu|SETTING_BrANCH_FAILURE_ROUTE"); t_on_branch_failure("manage_branch_failure"); } # manage failure routing cases per branch event_route[tm:branch-failure:manage_branch_failure] { xlog("L_WARN","$rm|$ci|$fu|$tu[$avp(dest_to)]|MANAGE_BRANCH_FAILURE"); }