6 Oct
2011
6 Oct
'11
5:42 a.m.
Hi,
When UA connects with the Proxy over TCP, the contact is mostly bound to the
firewall's binding IP and port
for that connection. When the connection is dropped, the contact in Kamailio
is no longer valid even though there is time left to expire the contact.
Is there some way to link TCP connection and the contact in such a way that
when TCP connection is dropped, contact from the location can be removed?
Thanks
Krish Kura
6 Oct
6 Oct
5:49 a.m.
New subject: Removing Contact from location table when TCP connection from UA is dropped...
No. Connection state and AOR validity are unrelated things. There is no reason foreseen
by protocol mechanics and standards for why the proxy should not be able to open a new TCP
connection when routing a request to that contact binding.
--
This message was painstakingly thumbed out on my mobile, so apologies for brevity, errors,
and general sloppiness.
Alex Balashov - Principal
Evariste Systems LLC
260 Peachtree Street NW
Suite 2200
Atlanta, GA 30303
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
On Oct 5, 2011, at 11:42 PM, Krishna Kurapati <kkurapat(a)gmail.com> wrote:
Hi,
When UA connects with the Proxy over TCP, the contact is mostly bound to the
firewall's binding IP and port
for that connection. When the connection is dropped, the contact in Kamailio is no longer
valid even though there is time left to expire the contact.
Is there some way to link TCP connection and the contact in such a way that when TCP
connection is dropped, contact from the location can be removed?
Thanks
Krish Kura
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4804
days inactive
4804
days old
1 comments
2 participants
participants (2)
-
Alex Balashov -
Krishna Kurapati