Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov <vitalik.voip@gmail.com

wrote:

You didn't receive any NOTIFY requests because you didn't have a PUA client. rfc3903 describes what a PUA client is.

To make BLF work you can try to use the next modules:

1. dialog - to enable dialog awareness
2. pua + pua_dialoginfo - to enable a PUA client based on active dialogs

information provided by the "dialog" module 3. presence + presence_dialoginfo - to handle subscriptions and send notifications to phones

Hi list,

I've been trying to make my Yealink phone to give BLF indications but I haven't been able to achieve this successfully yet so I need some expert advise here. My Yealink phone, as soon as it registers to Asterisk, gives me BLF lights. The same phone registering to Kamailio sends SUBSCRIBE and nothing happens.

The Presence Handling is enabled in configurations and yet no dialog-info+xml NOTIFY is received.

Please help.

Best Regards, Sammy Go.

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Hello,

just to say that SCA module might be an alternative, not sure it works for blf, could be only for bla/sla, but worth checking the email.

Also, if you post ngrep output (sip traffic as sip), could be easier to review the traces from a device that is not yet capable of installing tcpdump/ngrep/etc ... tools, like tablets, smartphones ... increasing your chance to get more people to an answer.

Cheers, Daniel

On 5/28/13 11:41 PM, SamyGo wrote:

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 2:32 AM, SamyGo <govoiper@gmail.com mailto:govoiper@gmail.com> wrote:

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_dialoginfo.so"
loadmodule "pua.so"
loadmodule "pua_dialoginfo.so"
loadmodule "pua_usrloc.so"
#!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.




On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov
<vitalik.voip@gmail.com <mailto:vitalik.voip@gmail.com>> wrote:

    You didn't receive any NOTIFY requests because you didn't have
    a PUA client. rfc3903 describes what a PUA client is.

    To make BLF work you can try to use the next modules:
    1. dialog - to enable dialog awareness
    2. pua + pua_dialoginfo - to enable a PUA client based on
    active dialogs information provided by the "dialog" module
    3. presence + presence_dialoginfo - to handle subscriptions
    and send notifications to phones

...

    Hi list,

    I've been trying to make my Yealink phone to give BLF
    indications but I haven't been able to achieve this
    successfully yet so I need some expert advise here.
    My Yealink phone, as soon as it registers to Asterisk, gives
    me BLF lights. The same phone registering to Kamailio sends
    SUBSCRIBE and nothing happens.

    The Presence Handling is enabled in configurations and yet no
    dialog-info+xml NOTIFY is received.

    Please help.

    Best Regards,
    Sammy Go.



    _______________________________________________
    SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
    sr-users@lists.sip-router.org  <mailto:sr-users@lists.sip-router.org>
    http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

    _______________________________________________
    SIP Express Router (SER) and Kamailio (OpenSER) - sr-users
    mailing list
    sr-users@lists.sip-router.org
    <mailto:sr-users@lists.sip-router.org>
    http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

I think you have missed the fact that you don't have PUA component. PUA client is the thing that should send PUBLISH requests with dialoginfo body to kamailio. Kamailio in its turn will use mentioned PUBLISHes to send NOTIFY to your phones.

Hi again,

I doubt SCA module will work for me but let me get this a shot tonight and get back with a sipgrep trace. Meanwhile I was just thinking if the 'skype like service' blog at Asipto http://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hour might work straight away. I really don;t see any difference in my PRESENCE route but maybe I've missed anything.

Let me get back with more working on this.

Thanks for the reply.

Sammy Go.

On Wed, May 29, 2013 at 1:35 PM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:

Hello,

just to say that SCA module might be an alternative, not sure it
works for blf, could be only for bla/sla, but worth checking the
email.

Also, if you post ngrep output (sip traffic as sip), could be
easier to review the traces from a device that is not yet capable
of installing tcpdump/ngrep/etc ... tools, like tablets,
smartphones ... increasing your chance to get more people to an
answer.

Cheers,
Daniel


On 5/28/13 11:41 PM, SamyGo wrote:

...

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
loadmodule "presence_dialoginfo.so"
loadmodule "pua.so"
loadmodule "pua_dialoginfo.so"
loadmodule "pua_usrloc.so"
#!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.


On Wed, May 29, 2013 at 2:32 AM, SamyGo <govoiper@gmail.com
<mailto:govoiper@gmail.com>> wrote:

    Yeah, I'm getting your point.

    So now, here are my loaded modules.

    #!ifdef WITH_PRESENCE
    loadmodule "presence.so"
    loadmodule "presence_xml.so"
    loadmodule "presence_dialoginfo.so"
    loadmodule "pua.so"
    loadmodule "pua_dialoginfo.so"
    loadmodule "pua_usrloc.so"
    #!endif

    And of course:

    loadmodule "dialog.so"

    Attached are the relevant sip traces.




    On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov
    <vitalik.voip@gmail.com <mailto:vitalik.voip@gmail.com>> wrote:

        You didn't receive any NOTIFY requests because you didn't
        have a PUA client. rfc3903 describes what a PUA client is.

        To make BLF work you can try to use the next modules:
        1. dialog - to enable dialog awareness
        2. pua + pua_dialoginfo - to enable a PUA client based on
        active dialogs information provided by the "dialog" module
        3. presence + presence_dialoginfo - to handle
        subscriptions and send notifications to phones

...

        Hi list,

        I've been trying to make my Yealink phone to give BLF
        indications but I haven't been able to achieve this
        successfully yet so I need some expert advise here.
        My Yealink phone, as soon as it registers to Asterisk,
        gives me BLF lights. The same phone registering to
        Kamailio sends SUBSCRIBE and nothing happens.

        The Presence Handling is enabled in configurations and
        yet no dialog-info+xml NOTIFY is received.

        Please help.

        Best Regards,
        Sammy Go.



        _______________________________________________
        SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
        sr-users@lists.sip-router.org  <mailto:sr-users@lists.sip-router.org>
        http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

        _______________________________________________
        SIP Express Router (SER) and Kamailio (OpenSER) -
        sr-users mailing list
        sr-users@lists.sip-router.org
        <mailto:sr-users@lists.sip-router.org>
        http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users





_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users@lists.sip-router.org  <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- 
Daniel-Constantin Mierla -http://www.asipto.com
http://twitter.com/#!/miconda  <http://twitter.com/#%21/miconda>  -http://www.linkedin.com/in/miconda
Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013
   *http://asipto.com/u/katu  *


_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users@lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Yes, As OEJ mentioned there were no Dialogs created so had to put the dlg_manage(); in the cfg and now in kamcmd the dlg.list command displays call data. How can I add presence stuff now. Vitaliy, please explain further how can I add the PUA component.

Thanks, Sammy

On Thu, May 30, 2013 at 6:17 PM, Olle E. Johansson oej@edvina.net wrote:

30 maj 2013 kl. 13:07 skrev SamyGo govoiper@gmail.com:

Hi again,

I doubt SCA module will work for me but let me get this a shot tonight and get back with a sipgrep trace. Meanwhile I was just thinking if the 'skype like service' blog at Asiptohttp://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hourmight work straight away. I really don;t see any difference in my PRESENCE route but maybe I've missed anything.

Let me get back with more working on this.

Start with making sure that the Dialog module works as expected for you. Check with kamcmd that you have active dialogs when you have active calls. When that works, start with adding presence.

Cheers, /O

Thanks for the reply.

Sammy Go.

On Wed, May 29, 2013 at 1:35 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:

...

Hello,

just to say that SCA module might be an alternative, not sure it works for blf, could be only for bla/sla, but worth checking the email.

Also, if you post ngrep output (sip traffic as sip), could be easier to review the traces from a device that is not yet capable of installing tcpdump/ngrep/etc ... tools, like tablets, smartphones ... increasing your chance to get more people to an answer.

Cheers, Daniel

On 5/28/13 11:41 PM, SamyGo wrote:

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 2:32 AM, SamyGo govoiper@gmail.com wrote:

...

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov < vitalik.voip@gmail.com> wrote:

...

You didn't receive any NOTIFY requests because you didn't have a PUA client. rfc3903 describes what a PUA client is.

To make BLF work you can try to use the next modules:

1. dialog - to enable dialog awareness
2. pua + pua_dialoginfo - to enable a PUA client based on active

dialogs information provided by the "dialog" module 3. presence + presence_dialoginfo - to handle subscriptions and send notifications to phones

Hi list,

I've been trying to make my Yealink phone to give BLF indications but I haven't been able to achieve this successfully yet so I need some expert advise here. My Yealink phone, as soon as it registers to Asterisk, gives me BLF lights. The same phone registering to Kamailio sends SUBSCRIBE and nothing happens.

The Presence Handling is enabled in configurations and yet no dialog-info+xml NOTIFY is received.

Please help.

Best Regards, Sammy Go.

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013

• http://asipto.com/u/katu *

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Hi again,

Yes Vitaliy, that's exactly where I started except it was the page for Kamailio 4.0. Following modules are loaded:

loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "presence_reginfo" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" loadmodule "pua_reginfo"

With following params:

modparam("presence", "db_url", DBURL) modparam("presence", "server_address", "sip:A.A.A.A:5060" ) modparam("presence", "send_fast_notify", 0) modparam("presence", "db_update_period", 20)

# ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 0) modparam("presence_xml", "integrated_xcap_server", 1) modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("pua", "db_url", DBURL)

modparam("pua_usrloc", "default_domain", "myvoipdomain.com") modparam("pua_usrloc", "branch_flag", 9)

modparam("pua_dialoginfo", "include_callid", 1) modparam("pua_reginfo", "server_address", "sip:reginfo@A.A.A.A:5060") modparam("pua_reginfo", "default_domain", "myvoipdomain.com") #!endif

I'll try SCA module with these as well in a short while.

I appreciate your help guys.

-- Sammy

On Fri, May 31, 2013 at 2:28 AM, Vitaliy Aleksandrov <vitalik.voip@gmail.com

wrote:

Have you checked presence_dialoginfo documentation ? http://kamailio.org/docs/modules/devel/modules/presence_dialoginfo.html

The link above has a description of the way BLF can be implemented on kamailio and I think it has all the details you need to make it work. I haven't used this scheme and know about it only from the mentioned paper, so I can't explain it in more detail.

Yes, As OEJ mentioned there were no Dialogs created so had to put the dlg_manage(); in the cfg and now in kamcmd the dlg.list command displays call data. How can I add presence stuff now. Vitaliy, please explain further how can I add the PUA component.

Thanks, Sammy

On Thu, May 30, 2013 at 6:17 PM, Olle E. Johansson oej@edvina.net wrote:

...

30 maj 2013 kl. 13:07 skrev SamyGo govoiper@gmail.com:

Hi again,

I doubt SCA module will work for me but let me get this a shot tonight and get back with a sipgrep trace. Meanwhile I was just thinking if the 'skype like service' blog at Asiptohttp://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hourmight work straight away. I really don;t see any difference in my PRESENCE route but maybe I've missed anything.

Let me get back with more working on this.

Start with making sure that the Dialog module works as expected for you. Check with kamcmd that you have active dialogs when you have active calls. When that works, start with adding presence.

Cheers, /O

Thanks for the reply.

Sammy Go.

On Wed, May 29, 2013 at 1:35 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:

...

Hello,

just to say that SCA module might be an alternative, not sure it works for blf, could be only for bla/sla, but worth checking the email.

Also, if you post ngrep output (sip traffic as sip), could be easier to review the traces from a device that is not yet capable of installing tcpdump/ngrep/etc ... tools, like tablets, smartphones ... increasing your chance to get more people to an answer.

Cheers, Daniel

On 5/28/13 11:41 PM, SamyGo wrote:

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 2:32 AM, SamyGo govoiper@gmail.com wrote:

...

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov < vitalik.voip@gmail.com> wrote:

...

You didn't receive any NOTIFY requests because you didn't have a PUA client. rfc3903 describes what a PUA client is.

To make BLF work you can try to use the next modules:

1. dialog - to enable dialog awareness
2. pua + pua_dialoginfo - to enable a PUA client based on active

dialogs information provided by the "dialog" module 3. presence + presence_dialoginfo - to handle subscriptions and send notifications to phones

Hi list,

I've been trying to make my Yealink phone to give BLF indications but I haven't been able to achieve this successfully yet so I need some expert advise here. My Yealink phone, as soon as it registers to Asterisk, gives me BLF lights. The same phone registering to Kamailio sends SUBSCRIBE and nothing happens.

The Presence Handling is enabled in configurations and yet no dialog-info+xml NOTIFY is received.

Please help.

Best Regards, Sammy Go.

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013

• http://asipto.com/u/katu *

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

See the ngrep attached.

On Fri, May 31, 2013 at 9:41 PM, SamyGo govoiper@gmail.com wrote:

Hi again,

Adding SCA doesn't help much here. Please see the ngrep traces attached. However I've seen these logs showing up now:

INFO: pua_dialoginfo [dialog_publish.c:386]: CALLING dialog_publish for URI sip:4155@wistle.myvoipdomain.com:5060 INFO: pua_dialoginfo [dialog_publish.c:386]: CALLING dialog_publish for URI sip:4144@wistle.myvoipdomain.com:5060

Unfortunately I still don't see any lights blinking on my phones.

Any help here will be much appreciated.

BR, Sammy

On Fri, May 31, 2013 at 11:10 AM, SamyGo govoiper@gmail.com wrote:

...

Hi again,

Yes Vitaliy, that's exactly where I started except it was the page for Kamailio 4.0. Following modules are loaded:

loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "presence_reginfo" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" loadmodule "pua_reginfo"

With following params:

modparam("presence", "db_url", DBURL) modparam("presence", "server_address", "sip:A.A.A.A:5060" ) modparam("presence", "send_fast_notify", 0) modparam("presence", "db_update_period", 20)

# ----- presence_xml params ----- modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 0) modparam("presence_xml", "integrated_xcap_server", 1) modparam("presence_dialoginfo", "force_single_dialog", 1) modparam("pua", "db_url", DBURL)

modparam("pua_usrloc", "default_domain", "myvoipdomain.com") modparam("pua_usrloc", "branch_flag", 9)

modparam("pua_dialoginfo", "include_callid", 1) modparam("pua_reginfo", "server_address", "sip:reginfo@A.A.A.A:5060") modparam("pua_reginfo", "default_domain", "myvoipdomain.com") #!endif

I'll try SCA module with these as well in a short while.

I appreciate your help guys.

-- Sammy

On Fri, May 31, 2013 at 2:28 AM, Vitaliy Aleksandrov < vitalik.voip@gmail.com> wrote:

...

Have you checked presence_dialoginfo documentation ? http://kamailio.org/docs/modules/devel/modules/presence_dialoginfo.html

The link above has a description of the way BLF can be implemented on kamailio and I think it has all the details you need to make it work. I haven't used this scheme and know about it only from the mentioned paper, so I can't explain it in more detail.

Yes, As OEJ mentioned there were no Dialogs created so had to put the dlg_manage(); in the cfg and now in kamcmd the dlg.list command displays call data. How can I add presence stuff now. Vitaliy, please explain further how can I add the PUA component.

Thanks, Sammy

On Thu, May 30, 2013 at 6:17 PM, Olle E. Johansson oej@edvina.netwrote:

...

30 maj 2013 kl. 13:07 skrev SamyGo govoiper@gmail.com:

Hi again,

I doubt SCA module will work for me but let me get this a shot tonight and get back with a sipgrep trace. Meanwhile I was just thinking if the 'skype like service' blog at Asiptohttp://kb.asipto.com/kamailio:skype-like-service-in-less-than-one-hourmight work straight away. I really don;t see any difference in my PRESENCE route but maybe I've missed anything.

Let me get back with more working on this.

Start with making sure that the Dialog module works as expected for you. Check with kamcmd that you have active dialogs when you have active calls. When that works, start with adding presence.

Cheers, /O

Thanks for the reply.

Sammy Go.

On Wed, May 29, 2013 at 1:35 PM, Daniel-Constantin Mierla < miconda@gmail.com> wrote:

...

Hello,

just to say that SCA module might be an alternative, not sure it works for blf, could be only for bla/sla, but worth checking the email.

Also, if you post ngrep output (sip traffic as sip), could be easier to review the traces from a device that is not yet capable of installing tcpdump/ngrep/etc ... tools, like tablets, smartphones ... increasing your chance to get more people to an answer.

Cheers, Daniel

On 5/28/13 11:41 PM, SamyGo wrote:

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 2:32 AM, SamyGo govoiper@gmail.com wrote:

...

Yeah, I'm getting your point.

So now, here are my loaded modules.

#!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "pua.so" loadmodule "pua_dialoginfo.so" loadmodule "pua_usrloc.so" #!endif

And of course:

loadmodule "dialog.so"

Attached are the relevant sip traces.

On Wed, May 29, 2013 at 1:00 AM, Vitaliy Aleksandrov < vitalik.voip@gmail.com> wrote:

> You didn't receive any NOTIFY requests because you didn't have a > PUA client. rfc3903 describes what a PUA client is. > > To make BLF work you can try to use the next modules: > 1. dialog - to enable dialog awareness > 2. pua + pua_dialoginfo - to enable a PUA client based on active > dialogs information provided by the "dialog" module > 3. presence + presence_dialoginfo - to handle subscriptions and send > notifications to phones > > Hi list, > > I've been trying to make my Yealink phone to give BLF indications > but I haven't been able to achieve this successfully yet so I need some > expert advise here. > My Yealink phone, as soon as it registers to Asterisk, gives me BLF > lights. The same phone registering to Kamailio sends SUBSCRIBE and nothing > happens. > > The Presence Handling is enabled in configurations and yet no > dialog-info+xml NOTIFY is received. > > Please help. > > Best Regards, > Sammy Go. > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > > > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing > list > sr-users@lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > >

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla - http://www.asipto.comhttp://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda Kamailio Advanced Training, San Francisco, USA - June 24-27, 2013

• http://asipto.com/u/katu *

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing listsr-users@lists.sip-router.orghttp://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

---

SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users@lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users