gunawan wrote:

Hi...

Thanks Iqbal, Thanks Steve (http://mit.edu/sip/sip.edu/ciscoGW.html) for ur answer.... Thanks for getting started document at www.onsip.org :) It's really help me to understand PSTN - Ser.. :)

hhmm.. I have another question... :)

1. Could u tell me the way how I can know that my SIP

server is already connected and can receive signal from Cisco Gateway when I dial from PSTN to SER Client...

2. do Cisco gateway have any command or syntax to

detect signal from SIP client....?????

On the gateway you can try enabling debug commands to see how/if the gateway is interacting with your Service Provider and your SER box. Two commands I use often are debug isdn q931 and debug ccsip messages. debug voice ccapi inout is handy sometimes but it produces quite a bit of information.

show dialplan number <extension> is an easy way to see which dial-peers are being matched.

The unsupported command csim start <extension> may help too. This command provides a way for the router to initiate a call. The router cannot participate in a conversation only ring the specified phone number. This is handy if you want to test if a dial-peer is forwarding calls for the specified number to SER.

Of course there is tail -f <ser log file> too.

-Steve

thanks..

---

Hi

1. If you wish to call PSTN, you dial the PSTN number

direct, however ser needs to be told based on that number / or based on that prefix where to go, i.e the IP address of the gateway. EG lets say the pstn number is 001 445 667788, then inser you would have something like (syntax will be wrong cause I cant recall these things, so please check) if (uri=sip:001*@*) { rewritehost(a.b.c.d) t_relay }

a.b.c.d is your pstn gateway, look at www.onsip.org, they have a getting started doc, which covers pstn connection

2. If the pstn needs to call xlite, you need to tell

you cisco gateway that when someone dials

+62(761)53803 it should goto the ser proxy, and ser should know that thatr number maps to your xlite username

3. No

Iqbal

gunawan wrote:

...

hi, I'm newbiie in using ser ..... I am confused about how ser can connect to PSTN.... in my experiment i have two client using xlite.. the name are xlite1 and xlite2 with alias number 6276101 and 6276102. and I have two PSTN number provided by local communication provider one is +62(761)53803 and another one is +62(761)53939.. I use 53803 for my PSTN gateway... I use cisco

gateway

...

2620XM and VIC2FXO...

1. If I want to call to PSTN number, what number

should I dial from xlite1?????? Do I have to dial my PSTN Gateway first before I dial my destination number????

2. If I want to make a call from PSTN to xlite1, what

should I dial after I dial my PSTN gateway number???

3. Do I have to add my destination PSTN number at

subscriber table in my database?????

Thanks before...

____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

.

____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2. Router# show call history voice

Regards

Alberto Cruz gunawan wrote:

Hi...

Thanks Iqbal, Thanks Steve (http://mit.edu/sip/sip.edu/ciscoGW.html) for ur answer.... Thanks for getting started document at www.onsip.org :) It's really help me to understand PSTN - Ser.. :)

hhmm.. I have another question... :)

1. Could u tell me the way how I can know that my SIP

server is already connected and can receive signal from Cisco Gateway when I dial from PSTN to SER Client...

2. do Cisco gateway have any command or syntax to

detect signal from SIP client....?????

thanks..

---

Hi

1. If you wish to call PSTN, you dial the PSTN number

direct, however ser needs to be told based on that number / or based on that prefix where to go, i.e the IP address of the gateway. EG lets say the pstn number is 001 445 667788, then inser you would have something like (syntax will be wrong cause I cant recall these things, so please check) if (uri=sip:001*@*) { rewritehost(a.b.c.d) t_relay }

a.b.c.d is your pstn gateway, look at www.onsip.org, they have a getting started doc, which covers pstn connection

2. If the pstn needs to call xlite, you need to tell

you cisco gateway that when someone dials

+62(761)53803 it should goto the ser proxy, and ser should know that thatr number maps to your xlite username

3. No

Iqbal

gunawan wrote:

...

hi, I'm newbiie in using ser ..... I am confused about how ser can connect to PSTN.... in my experiment i have two client using xlite.. the name are xlite1 and xlite2 with alias number 6276101 and 6276102. and I have two PSTN number provided by local communication provider one is +62(761)53803 and another one is +62(761)53939.. I use 53803 for my PSTN gateway... I use cisco

gateway

...

2620XM and VIC2FXO...

1. If I want to call to PSTN number, what number

should I dial from xlite1?????? Do I have to dial my PSTN Gateway first before I dial my destination number????

2. If I want to make a call from PSTN to xlite1, what

should I dial after I dial my PSTN gateway number???

3. Do I have to add my destination PSTN number at

subscriber table in my database?????

Thanks before...

____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

.

____________________________________________________ Yahoo! Sports Rekindle the Rivalries. Sign up for Fantasy Football http://football.fantasysports.yahoo.com

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers