Re: [Serusers] problem with loading compiled radius modules - sr-users

16 Feb 2003

I have resolved this problem. The radiusclient library was not
included in the both radius modules, somehow. After I statically
linked the radiusclient library with the option -lradiusclient when
compiling, it works.

regards

yang 

-------------------
...
  The modules need radiusclient library but linker is
unable to find
 symbols from the library. Do you have the radiusclient library installed
...
  correctly ?

   regards, Jan.

 On 14-02 14:35, Yang Xiang wrote:
 > Hi,
 > 
 > I get the same error.
 > 
 > I have compiled the whole server and try to load modules on the host where
...
  > the server was compiled. Unfortunatelly it
doesn't work. I get the same
...
  > error message as before.
 > 
 > What should I do????
 > 
 > Regards
 > 
 > Yang
 > 
 > 
 > ----- Original Message -----
 > From: "Jan Janak" &lt;J.Janak(a)sh.cvut.cz&gt;
 > To: "Yang Xiang" &lt;yang.xiang(a)iitb.fraunhofer.de&gt;
 > Sent: Friday, February 14, 2003 2:03 PM
 > Subject: Re: [Serusers] problem with loading compiled radius modules
...
  > 
 > 
 > > Recompile the whole server if you can. As you said you use precomplied
...
  > > binaries and it is possible that it was
compiled using a different
...
  > > compiler.
 > >
 > >   regards, Jan.
 > >
 > > On 14-02 13:56, Yang Xiang wrote:
 > > > Hi,
 > > >
 > > > Now I get more error messages:
 > > >
 > > >  0(22528) ERROR: load_module: could not open module
 > > > </usr/local/lib/ser/modules/radius_acc.so>: ld.so.1: ser:
fatal:
...
  > relocation
 > > > error: file /usr/local/lib/ser/modules/radius_acc.so: symbol
 > rc_avpair_add:
 > > > referenced symbol not found
 > > >  0(22528) parse error (30,13-54): failed to load module
 > > >  0(22528) ERROR: load_module: could not open module
 > > > </usr/local/lib/ser/modules/radius_auth.so>: ld.so.1: ser:
fatal:
...
  > relocation
 > > > error: file /usr/local/lib/ser/modules/radius_auth.so: symbol
 > > > rc_read_config: referenced symbol not found
 > > >  0(22528) parse error (31,13-55): failed to load module
 > > > ERROR: bad config file (2 errors)
 > > >
 > > > What is wrong? In acc_mod.c and auth_mod.c I changed the definition
of
...
  > > > CONFIG_FILE and let it point to an
absolute path
 > > > "/usr/local/etc/radiusclient/radiusclient.conf". By the way, I
compiled
...
  > the
 > > > modiles on another mashine and copied them to the mashine where ser
...
   runs. Is
   that
right?

 regards,

 yang