This is a packet dump from radiator.. Where are the attributes to identify the caller , and the callee.
The information I need is timestamp which is here . callingstationid calledstationid originatingip and destinationip
Any suggestions on how to get them to show up here . BTW the stop record is as lacking in info as this start record.
Attributes:
Acct-Status-Type = Start
Service-Type = Sip-Session
Sip-Response-Code = 200
Sip-Method = Invite
Event-Timestamp = 1181607270
Sip-From-Tag = "EELf2-pTUK4"
Sip-To-Tag = "N78f2-UF9FM0"
Acct-Session-Id = "0PkXg-tEbc4f2@207.158.49.3"
NAS-IP-Address = 207.158.49.3
NAS-Port-Id = 5060
Acct-Delay-Time = 0
Mon Jun 11 17:15:53 2007: DEBUG: Handling request with Handler 'NAS-IP-Address=xx.xx.xx.xx
Thank you
Russell Williams
something like:
modparam("acc", "radius_extra", "Called-Station-Id= $tU;Calling-Station-Id=$fU;Sip-Source-IP-Address=$si");
bye
:tele
On Tue, 2007-06-12 at 19:47 +0300, Juha Heinanen wrote:
Russell Williams writes:
This is a packet dump from radiator.. Where are the attributes to identify the caller , and the callee.
check what acc module documentation says about extra attributes and define the ones you are missing.
-- juha
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
jh＠tutpro.com -
Russell Williams -
tele