I'm trying to use group_radius module to check if the user is in a particular radius group. I'm calling radius_is_user_in function to do this. Here is the snippet in my config that calls that function: route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!radius_www_authorize("")) { xlog("L_INFO","$ci - $fu - User not authenticated, Radius Authenticating...\n"); www_challenge("","0"); return; } else { xlog("L_INFO","$ci - $fu - User authenticated...\n"); }; if (radius_is_user_in("From", "Dialin")){ xlog("L_INFO","From: User is in Radius Group

} else { xlog("L_INFO","From: User *IS NOT* Group Dialin!!!!!\n"); }; if (radius_is_user_in("From", "Dialin2")){ xlog("L_INFO","From: User is in Radius Group Dialin2!!!!\n"); } else { xlog("L_INFO","From: User *IS NOT* Group Dialin2!!!!!\n"); }; #if (!radius_check_to()) { # sl_send_reply("401", "Unauthorized"); # return; #}; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } -----Original Message----- From: Tavis P [mailto:tavis.lists@galaxytelecom.net] Sent: Wednesday, October 19, 2005 3:59 PM To: Lenir Cc: users(a)openser.org; serusers(a)lists.iptel.org Subject: Re: group_radius radius_is_user_in Well either way the radius server is going to respond with an "Access-Accept" because you have set the auth-type to "none" (which is necessary because you are not authenticating and can not provide the necessary credentials). the user 1000 and both of which respond as i would expect. I'm not what you are trying to accomplish, are you using the group_radius module or just loading the group information using avp_radius? Lenir wrote: >This is my users file: > >DEFAULT Auth-Type = System > Fall-Through = 1 > >DEFAULT Service-Type == Call-Check, Auth-Type := None > >DEFAULT Service-Type == Group-Check, Auth-Type := None > >DEFAULT Service-Type == SIP-Session, Auth-Type := Digest > >DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None > >DEFAULT Service-Type == SIP-Caller-AVPs, Auth-Type := None > > >mysql> select * from radcheck; >+----+----------+-----------+----+----------+ >| id | UserName | Attribute | op | Value | >+----+----------+-----------+----+----------+ >| 1 | Jhassell | Password | == | changeme | >| 2 | Rneis | Password | == | changeme | >| 3 | 1000 | Password | == | 1000 | >| 4 | 2000 | Password | == | 2000 | >| 5 | 3000 | Password | == | 3000 | >+----+----------+-----------+----+----------+ >5 rows in set (0.00 sec) > >mysql> select * from radreply; >Empty set (0.00 sec) > >mysql> select * from usergroup; >+----+----------+------------+ >| id | UserName | GroupName | >+----+----------+------------+ >| 1 | Jhassell | Dialin | >| 2 | Rneis | Staticdial | >| 3 | 1000 | Dialin | >| 4 | 2000 | Dialin | >| 5 | 3000 | Dialin | >| 6 | 3000 | Dialin2 | >+----+----------+------------+ >6 rows in set (0.00 sec) > >mysql> select * from radgroupcheck; >Empty set (0.00 sec) > >mysql> select * from radgroupreply; >+----+-----------+---------------+----+----------------------------------+

- >---+ >| id | GroupName | Attribute | op | Value | >prio | >+----+-----------+---------------+----+----------------------------------+

- >----+ >| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >0 | >| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >0 | >| 3 | Dialin | SIP-AVP | = | Sip-Group:Dialin | >0 | >+----+-----------+---------------+----+----------------------------------+

- >----+ >3 rows in set (0.00 sec) > >mysql> select * from radpostauth; >Empty set (0.00 sec) > > > >Here's the debug, notice how it returns access-accept whether its in the >right group or not. Shouldn't it return access-reject for group Dialin2? >----------------- >rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=152, >length=66 > User-Name = "1000(a)xx.xx.xx.xx" > Sip-Group = "Dialin" > Service-Type = Group-Check > NAS-IP-Address = 127.0.0.1 > NAS-Port = 0 > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 4 > modcall[authorize]: module "preprocess" returns ok for request 4 > modcall[authorize]: module "chap" returns noop for request 4 > modcall[authorize]: module "mschap" returns noop for request 4 > modcall[authorize]: module "digest" returns noop for request 4 > rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >"1000(a)xx.xx.xx.xx" > rlm_realm: Found realm "xx.xx.xx.xx" > rlm_realm: Adding Stripped-User-Name = "1000" > rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx > rlm_realm: Adding Realm = "xx.xx.xx.xx" > rlm_realm: Authentication realm is LOCAL. > modcall[authorize]: module "suffix" returns noop for request 4 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 4 > users: Matched entry DEFAULT at line 156 > users: Matched entry DEFAULT at line 161 > modcall[authorize]: module "files" returns ok for request 4 >radius_xlat: '1000' >rlm_sql (sql): sql_set_user escaped user --> '1000' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radcheck WHERE Username = '1000' ORDER BY id' >rlm_sql (sql): Reserving sql socket id: 0 >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radcheck WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radreply WHERE Username = '1000' ORDER BY id' >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radreply WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Checking profile DEFAULT >rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Released sql socket id: 0 > modcall[authorize]: module "sql" returns ok for request 4 >modcall: group authorize returns ok for request 4 > rad_check_password: Found Auth-Type None > rad_check_password: Auth-Type = Accept, accepting the user >radius_xlat: 'Authenticated by group Dialin' >Sending Access-Accept of id 152 to xx.xx.xx.xx:33167 > Reply-Message = "Authenticated by group Dialin" > SIP-AVP = "Sip-Group:Dialin" >Finished request 4 >Going to the next request >Waking up in 6 seconds... >rad_recv: Access-Request packet from host xx.xx.xx.xx:33167, id=153, >length=67 > User-Name = "1000(a)xx.xx.xx.xx" > Sip-Group = "Dialin2" > Service-Type = Group-Check > NAS-IP-Address = 127.0.0.1 > NAS-Port = 0 > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 5 > modcall[authorize]: module "preprocess" returns ok for request 5 > modcall[authorize]: module "chap" returns noop for request 5 > modcall[authorize]: module "mschap" returns noop for request 5 > modcall[authorize]: module "digest" returns noop for request 5 > rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >"1000(a)xx.xx.xx.xx" > rlm_realm: Found realm "xx.xx.xx.xx" > rlm_realm: Adding Stripped-User-Name = "1000" > rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx > rlm_realm: Adding Realm = "xx.xx.xx.xx" > rlm_realm: Authentication realm is LOCAL. > modcall[authorize]: module "suffix" returns noop for request 5 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 5 > users: Matched entry DEFAULT at line 156 > users: Matched entry DEFAULT at line 161 > modcall[authorize]: module "files" returns ok for request 5 >radius_xlat: '1000' >rlm_sql (sql): sql_set_user escaped user --> '1000' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radcheck WHERE Username = '1000' ORDER BY id' >rlm_sql (sql): Reserving sql socket id: 4 >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radcheck WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radreply WHERE Username = '1000' ORDER BY id' >rlm_sql_mysql: query: SELECT id, UserName, Attribute, Value, op >FROM radreply WHERE Username = '1000' ORDER BY id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = '1000' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Checking profile DEFAULT >rlm_sql (sql): sql_set_user escaped user --> 'DEFAULT' >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id' >rlm_sql_mysql: query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupc

e >ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql_mysql: query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupr

p >ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'DEFAULT' AND usergroup.GroupName = >radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Released sql socket id: 4 > modcall[authorize]: module "sql" returns ok for request 5 >modcall: group authorize returns ok for request 5 > rad_check_password: Found Auth-Type None > rad_check_password: Auth-Type = Accept, accepting the user >radius_xlat: 'Authenticated by group Dialin' >Sending Access-Accept of id 153 to xx.xx.xx.xx:33167 > Reply-Message = "Authenticated by group Dialin" > SIP-AVP = "Sip-Group:Dialin" >Finished request 5 > >-----Original Message----- >From: Tavis P [mailto:tavis.lists@galaxytelecom.net] >Sent: Friday, October 14, 2005 7:21 PM >To: Lenir >Cc: users(a)openser.org; serusers(a)lists.iptel.org >Subject: Re: group_radius radius_is_user_in > >Ugh the subject line is getting really munged up ;P > >Hmmm, what does the output from "radiusd -X" look like for the exchange? > > >Lenir wrote: > > > >>Tavis, >> >>Thanks for your input, that did fix the problem. I did have the "files" >>before "sql" in radiusd.conf. Also I followed your advice about taking

>>"Auth-Type" out of mysql table and let DEFAULT in users file do the

>>However it's semi-working. >> >>Accourding to the snippet from my ser.cfg file, now I get the following

Dialin2. have >>to comment out the following lines as they conflict with dictionary.ser >> >> >> >> >(SER > > > > >>CVS) and dictionary.sip (comes with radiusclient-NG) >> >>#VALUE Service-Type Voice 12 >>#VALUE Service-Type Fax 13 >>#VALUE Service-Type Modem-Relay 14 >>#VALUE Service-Type IAPP-Register 15 >>#VALUE Service-Type IAPP-AP-Check 16 >> >> >>Thanks, >> >> >>Lenir >> >> >>-----Original Message----- >>From: serusers-bounces(a)iptel.org [mailto:serusers-bounces@lists.iptel.org] On >>Behalf Of Tavis P >>Sent: Friday, October 14, 2005 1:49 PM >>To: lsantiago(a)globalgatewaycom.com >>Cc: serdev(a)lists.iptel.org; serusers(a)lists.iptel.org; devel(a)openser.org; >>users(a)openser.org >>Subject: [Serusers] Re: [Serdev] group_radius radius_is_user_in >> >>Oops, i spoke too soon >> >>It looks like you have placed the "files" module before the "sql" module >>in your radiusd.conf >> >>Its matching your DEFAULT entry in files (setting the Auth-Type to none) >>but the sql module is later changing the Auth-Type to "digest" >> >>Changing the order would solve this problem, as you want it to match the >>SQL statement first and than the section in the files last (which >>changes the Auth-Type) >> >>Also, you may want to reduce the load on your database by not setting >>the Auth-Type in the database and instead setting in the users file with >>a DEFAULT statement as (at least in my case) it isn't somthing that need >>to be dynamic. >> >>lenirsantiago(a)yahoo.com wrote: >> >> >> >> >> >> >> >>>Hello list, >>> >>>I've been trying my hardest today to get group_radius to work, and its >>>function radius_is_user_in(). >>>I'm running ser0.9.4 and freeradius 1.0.4 with the mysql backend and >>> >>> >>> >>> >digest > > > > >>>authentication. >>> >>>Radius authentication works fine. >>>The problem is that when radius_is_user_in() function gets called, it >>> >>> >>> >>> >sends > > > > >>>a radius message but without the User-Password field and freeradius >>>complains that it requires it since we are using Digest. >>>I've seen a couple of posts here, but they were never answered: >>>http://lists.iptel.org/pipermail/serusers/2005-March/017342.html >>>http://lists.iptel.org/pipermail/serusers/2005-March/017075.html >>> >>>----- >>>I have a small test in my ser.cfg file: >>> if (!radius_www_authorize("")) { >>> xlog("L_I","%ci - %fu - User not authenticated, Radius >>>Authenticating...\n"); >>> www_challenge("","0"); >>> break; >>> } else { >>> xlog("L_I","%ci - %fu - User authenticated...\n"); >>> }; >>> >>> if (radius_is_user_in("From", "Dialin")){ >>> xlog("L_I","From: User is in Radius Group Dialin!!!!\n"); >>> } else { >>> xlog("L_I","From: User *IS NOT* Group Dialin!!!!!\n"); >>> }; >>> >>> if (radius_is_user_in("Credentials", "Dialin2")){ >>> xlog("L_I","From: User is in Radius Group Dialin2!!!!\n"); >>> } else { >>> xlog("L_I","From: User *IS NOT* Group Dialin2!!!!!\n"); >>> }; >>> >>>----- >>>In /etc/raddb/users file I have the following at line 152: >>>DEFAULT Auth-Type = System >>> Fall-Through = 1 >>> >>>DEFAULT Service-Type == Group-Check, Auth-Type := None >>> >>>DEFAULT Service-Type == SIP-Callee-AVPs, Auth-Type := None >>> >>>----- >>> >>>These are mysql tables: >>> >>>+----+----------+-----------+----+----------+ >>>| id | UserName | Attribute | op | Value | >>>+----+----------+-----------+----+----------+ >>>| 1 | Jhassell | Password | == | changeme | >>>| 2 | Rneis | Password | == | changeme | >>>| 3 | 1000 | Password | == | 1000 | >>>| 4 | 2000 | Password | == | 2000 | >>>| 5 | 3000 | Password | == | 3000 | >>>| 8 | 1000 | Auth-Type | := | Digest | >>>+----+----------+-----------+----+----------+ >>> >>>+----+-----------+-----------+----+--------+ >>>| id | GroupName | Attribute | op | Value | >>>+----+-----------+-----------+----+--------+ >>>| 6 | Dialin | Auth-Type | := | Accept | >>>+----+-----------+-----------+----+--------+ >>> >>>+----+-----------+---------------+----+---------------------------------

+ >>> >>> >- > > > > >>> >>> >>> >>> >>- >> >> >> >> >> >> >>>----+ >>>| id | GroupName | Attribute | op | Value | >>>prio | >>>+----+-----------+---------------+----+---------------------------------

+ >>> >>> >- > > > > >>> >>> >>> >>> >>- >> >> >> >> >> >> >>>----+ >>>| 1 | Dialin | Reply-Message | = | "Authenticated by group Dialin" | >>>0 | >>>| 2 | Dialin2 | Reply-Message | = | "Authenticated by group Dialin2" | >>>0 | >>>+----+-----------+---------------+----+---------------------------------

+ >>> >>> >- > > > > >>> >>> >>> >>> >>- >> >> >> >> >> >> >>>----+ >>> >>>+----+----------+---------------+----+------------------+ >>>| id | UserName | Attribute | op | Value | >>>+----+----------+---------------+----+------------------+ >>>| 1 | 1000 | Reply-Message | = | "Authenticated" | >>>| 2 | 1000 | Sip-Group | = | Dialin | >>>| 3 | 1000 | SIP-AVP | = | Sip-Group:Dialin | >>>+----+----------+---------------+----+------------------+ >>> >>>+----+----------+------------+ >>>| id | UserName | GroupName | >>>+----+----------+------------+ >>>| 1 | Jhassell | Dialin | >>>| 2 | Rneis | Staticdial | >>>| 3 | 1000 | Dialin | >>>| 4 | 2000 | Dialin | >>>| 5 | 3000 | Dialin | >>>| 6 | 3000 | Dialin2 | >>>+----+----------+------------+ >>> >>>------ >>> >>>This is the debug I get from freeradius for the group check: >>> >>>rad_recv: Access-Request packet from host xx.xx.xx.xx:33025, id=15, >>>length=67 >>> User-Name = "1000(a)xx.xx.xx.xx" >>> Sip-Group = "Dialin2" >>> Service-Type = Group-Check >>> NAS-IP-Address = 127.0.0.1 >>> NAS-Port = 0 >>>Processing the authorize section of radiusd.conf >>>modcall: entering group authorize for request 74 >>>modcall[authorize]: module "preprocess" returns ok for request 74 >>>modcall[authorize]: module "chap" returns noop for request 74 >>>modcall[authorize]: module "mschap" returns noop for request 74 >>>modcall[authorize]: module "digest" returns noop for request 74 >>> rlm_realm: Looking up realm "xx.xx.xx.xx" for User-Name = >>>"1000(a)xx.xx.xx.xx" >>> rlm_realm: Found realm "xx.xx.xx.xx" >>> rlm_realm: Adding Stripped-User-Name = "1000" >>> rlm_realm: Proxying request from user 1000 to realm xx.xx.xx.xx >>> rlm_realm: Adding Realm = "xx.xx.xx.xx" >>> rlm_realm: Authentication realm is LOCAL. >>>modcall[authorize]: module "suffix" returns noop for request 74 >>>rlm_eap: No EAP-Message, not doing EAP >>>modcall[authorize]: module "eap" returns noop for request 74 >>> users: Matched entry DEFAULT at line 152 >>> users: Matched entry DEFAULT at line 158 >>>modcall[authorize]: module "files" returns ok for request 74 >>>radius_xlat: '1000' >>>rlm_sql (sql): sql_set_user escaped user --> '1000' >>>rlm_sql (sql): Released sql socket id: 0 >>>modcall[authorize]: module "sql" returns ok for request 74 >>>modcall: group authorize returns ok for request 74 >>>rad_check_password: Found Auth-Type Digest >>>auth: type "digest" >>>Processing the authenticate section of radiusd.conf >>>modcall: entering group authenticate for request 74 >>>ERROR: No Digest-Nonce: Cannot perform Digest authentication >>>modcall[authenticate]: module "digest" returns invalid for request 74 >>>modcall: group authenticate returns invalid for request 74 >>>auth: Failed to validate the user. >>>Delaying request 74 for 1 seconds >>>Finished request 74 >>>Going to the next request >>>--- Walking the entire request list --- >>>Waking up in 1 seconds... >>>--- Walking the entire request list --- >>>Waking up in 1 seconds... >>>--- Walking the entire request list --- >>>Sending Access-Reject of id 15 to xx.xx.xx.xx:33025 >>> Reply-Message = "Authenticated" >>>Waking up in 4 seconds... >>>--- Walking the entire request list --- >>>Cleaning up request 74 ID 15 with timestamp 434f1121 >>>Nothing to do. Sleeping until we see a request. >>> >>> >>> >>> >>> >>>Any help in this matter would be deeply appreciated, >>> >>> >>> >>> >>>Lenir >>> >>> >>> >>> >>>_______________________________________________ >>>Serdev mailing list >>>serdev(a)lists.iptel.org >>>http://lists.iptel.org/mailman/listinfo/serdev >>> >>> >>> >>> >>> >>> >>> >>> >>_______________________________________________ >>Serusers mailing list >>serusers(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serusers >> >> >>_______________________________________________ >>Serdev mailing list >>serdev(a)lists.iptel.org >>http://lists.iptel.org/mailman/listinfo/serdev >> >> >> >> >> >> >> >> > > > > > >