I've tried setting the RPID field in the subscriber table. No such luck. Anyone else using openser with the TNT? I've dug into the TNT manual but it doesn't seem to give a spec of what makes caller presentation work. A packet trace of a working SIP to MAXTNT would be great then I could determine what was missing.
TIA
Shane
How about to set RPID in the dial plan using append_hf instead of subscriber table?
On 4/27/06, Shane Burrell shaneb@metrostat.net wrote:
I've tried setting the RPID field in the subscriber table. No such luck. Anyone else using openser with the TNT? I've dug into the TNT manual but it doesn't seem to give a spec of what makes caller presentation work. A packet trace of a working SIP to MAXTNT would be great then I could determine what was missing.
TIA
Shane
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
I did figure out a way to accomplish this with a cludge. I was using usernames without the phone number. If a number is used it works. However the MAXTNT should support RPID and its features such as privacy etc. I've tried to use the RPID but without a raw SIP trace of a working TNT its like shooting in the dark. Anyone out there have a working RPID with TNT or other gateway? Thanks to everyone who has responded to this.
Shane
-----Original Message----- From: unplug [mailto:maillisting@gmail.com] Sent: Wednesday, April 26, 2006 9:35 PM To: Shane Burrell Cc: users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
How about to set RPID in the dial plan using append_hf instead of subscriber table?
On 4/27/06, Shane Burrell shaneb@metrostat.net wrote:
I've tried setting the RPID field in the subscriber table. No such luck. Anyone else using openser with the TNT? I've dug into the TNT manual but
it
doesn't seem to give a spec of what makes caller presentation work. A packet trace of a working SIP to MAXTNT would be great then I could determine what was missing.
TIA
Shane
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Shane,
are you sure that the RPID hdr actually gets into the message forwarded to MAXTNT?
regards, bogdan
Shane Burrell wrote:
I did figure out a way to accomplish this with a cludge. I was using usernames without the phone number. If a number is used it works. However the MAXTNT should support RPID and its features such as privacy etc. I've tried to use the RPID but without a raw SIP trace of a working TNT its like shooting in the dark. Anyone out there have a working RPID with TNT or other gateway? Thanks to everyone who has responded to this.
Shane
-----Original Message----- From: unplug [mailto:maillisting@gmail.com] Sent: Wednesday, April 26, 2006 9:35 PM To: Shane Burrell Cc: users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
How about to set RPID in the dial plan using append_hf instead of subscriber table?
On 4/27/06, Shane Burrell shaneb@metrostat.net wrote:
I've tried setting the RPID field in the subscriber table. No such luck. Anyone else using openser with the TNT? I've dug into the TNT manual but
it
doesn't seem to give a spec of what makes caller presentation work. A packet trace of a working SIP to MAXTNT would be great then I could determine what was missing.
TIA
Shane
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Actually, I don't see it. Is there something I need to put in openser.cfg to send a RPID header?
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Thursday, April 27, 2006 3:10 AM To: Shane Burrell Cc: 'unplug'; users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
Shane,
are you sure that the RPID hdr actually gets into the message forwarded to MAXTNT?
regards, bogdan
Shane Burrell wrote:
I did figure out a way to accomplish this with a cludge. I was using usernames without the phone number. If a number is used it works. However the MAXTNT should support RPID and its features such as privacy etc. I've tried to use the RPID but without a raw SIP trace of a working TNT its like shooting in the dark. Anyone out there have a working RPID with TNT or other gateway? Thanks to everyone who has responded to this.
Shane
-----Original Message----- From: unplug [mailto:maillisting@gmail.com] Sent: Wednesday, April 26, 2006 9:35 PM To: Shane Burrell Cc: users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
How about to set RPID in the dial plan using append_hf instead of subscriber table?
On 4/27/06, Shane Burrell shaneb@metrostat.net wrote:
I've tried setting the RPID field in the subscriber table. No such luck. Anyone else using openser with the TNT? I've dug into the TNT manual but
it
doesn't seem to give a spec of what makes caller presentation work. A packet trace of a working SIP to MAXTNT would be great then I could determine what was missing.
TIA
Shane
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
yes, you have first to do authentication for the user (to auto load the RPID from subscriber table) and to use "append_rpid_hf" function (see the auth module).
regards, bogdan
Shane Burrell wrote:
Actually, I don't see it. Is there something I need to put in openser.cfg to send a RPID header?
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Thursday, April 27, 2006 3:10 AM To: Shane Burrell Cc: 'unplug'; users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
Shane,
are you sure that the RPID hdr actually gets into the message forwarded to MAXTNT?
regards, bogdan
Shane Burrell wrote:
I did figure out a way to accomplish this with a cludge. I was using usernames without the phone number. If a number is used it works. However the MAXTNT should support RPID and its features such as privacy etc. I've tried to use the RPID but without a raw SIP trace of a working TNT its like shooting in the dark. Anyone out there have a working RPID with TNT or other gateway? Thanks to everyone who has responded to this.
Shane
-----Original Message----- From: unplug [mailto:maillisting@gmail.com] Sent: Wednesday, April 26, 2006 9:35 PM To: Shane Burrell Cc: users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
How about to set RPID in the dial plan using append_hf instead of subscriber table?
On 4/27/06, Shane Burrell shaneb@metrostat.net wrote:
I've tried setting the RPID field in the subscriber table. No such luck. Anyone else using openser with the TNT? I've dug into the TNT manual but
it
doesn't seem to give a spec of what makes caller presentation work. A packet trace of a working SIP to MAXTNT would be great then I could determine what was missing.
TIA
Shane
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Thanks. That works perfectly.
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Friday, April 28, 2006 2:37 AM To: Shane Burrell Cc: 'unplug'; users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
yes, you have first to do authentication for the user (to auto load the RPID from subscriber table) and to use "append_rpid_hf" function (see the auth module).
regards, bogdan
Shane Burrell wrote:
Actually, I don't see it. Is there something I need to put in openser.cfg to send a RPID header?
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Thursday, April 27, 2006 3:10 AM To: Shane Burrell Cc: 'unplug'; users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
Shane,
are you sure that the RPID hdr actually gets into the message forwarded to MAXTNT?
regards, bogdan
Shane Burrell wrote:
I did figure out a way to accomplish this with a cludge. I was using usernames without the phone number. If a number is used it works.
However
the MAXTNT should support RPID and its features such as privacy etc. I've tried to use the RPID but without a raw SIP trace of a working TNT its
like
shooting in the dark. Anyone out there have a working RPID with TNT or other gateway? Thanks to everyone who has responded to this.
Shane
-----Original Message----- From: unplug [mailto:maillisting@gmail.com] Sent: Wednesday, April 26, 2006 9:35 PM To: Shane Burrell Cc: users@openser.org Subject: Re: [Users] RPID (Remote-Party-ID) MAXTNT Calling ID
How about to set RPID in the dial plan using append_hf instead of subscriber table?
On 4/27/06, Shane Burrell shaneb@metrostat.net wrote:
I've tried setting the RPID field in the subscriber table. No such luck. Anyone else using openser with the TNT? I've dug into the TNT manual but
it
doesn't seem to give a spec of what makes caller presentation work. A packet trace of a working SIP to MAXTNT would be great then I could determine what was missing.
TIA
Shane
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Bogdan-Andrei Iancu -
Shane Burrell -
unplug