30 Jun
2021
30 Jun
'21
9:14 p.m.
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
30 Jun
30 Jun
9:46 p.m.
Hello,
not familiar with python functions, have you tried with Kamailio
transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had
to do decoding when porting kamcli to work with Python3 -- had to change
from using directly the variables received as parameter to a decoded
value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if
can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header
generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position
27: invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
10:06 p.m.
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla <miconda(a)gmail.com>
wrote:
Hello,
not familiar with python functions, have you tried with Kamailio
transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to
do decoding when porting kamcli to work with Python3 -- had to change from
using directly the variables received as parameter to a decoded value,
something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if
can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header
generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
11:31 p.m.
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil <david.villasmil.work(a)gmail.com>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda(a)gmail.com" <miconda(a)gmail.com>om>, "Kamailio (SER) - Users
Mailing List" <sr-users(a)lists.kamailio.org>
Cc: Daniel Graham <dan(a)cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1 Jul
1 Jul
5:31 a.m.
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Daniel Graham
<dan(a)cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil <david.villasmil.work(a)gmail.com>om>, "miconda(a)gmail.com"
<miconda(a)gmail.com>om>, "Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil <david.villasmil.work(a)gmail.com>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda(a)gmail.com" <miconda(a)gmail.com>om>, "Kamailio (SER) - Users
Mailing List" <sr-users(a)lists.kamailio.org>
Cc: Daniel Graham <dan(a)cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:37 a.m.
Maybe the parameters provided to generate the header have some invalid
values. Can you give the relevant config snippets for generating the header?
Cheers,
Daniel
On 01.07.21 05:31, Daniel W. Graham wrote:
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
Daniel Graham <dan(a)cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Date: *Wednesday, June 30, 2021 at 5:32 PM
*To: *David Villasmil <david.villasmil.work(a)gmail.com>om>,
"miconda(a)gmail.com" <miconda(a)gmail.com>om>, "Kamailio (SER) - Users
Mailing List" <sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a
verification that the identity header/payload was correct before
activating new changes.
I will do further testing and share results. Just found it odd that
the header would decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil <david.villasmil.work(a)gmail.com>
*Date: *Wednesday, June 30, 2021 at 4:06 PM
*To: *"miconda(a)gmail.com" <miconda(a)gmail.com>om>, "Kamailio (SER) -
Users
Mailing List" <sr-users(a)lists.kamailio.org>
*Cc: *Daniel Graham <dan(a)cmsinter.net>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio
transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in Python that it is ASCII, I remember I
had to do decoding when porting kamcli to work with Python3 -- had
to change from using directly the variables received as parameter
to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and
see if can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity
header generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in
position 27: invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply
only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
5:23 p.m.
fU and rU are 10 digit numbers. My public key path is 81 characters long, could that be an
issue?
if (!secsipid_add_identity("$fU", "$rU", "A",
"","https://publickeypath.crt","/privatekeypath/shaken.pem")
{
…
}
-dan
On Jul 1, 2021, at 2:37 AM, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote:
Maybe the parameters provided to generate the header have some invalid values. Can you
give the relevant config snippets for generating the header?
Cheers,
Daniel
On 01.07.21 05:31, Daniel W. Graham wrote:
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com><mailto:david.villasmil.work@gmail.com>,
"miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com><mailto:david.villasmil.work@gmail.com>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Cc: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
5:05 p.m.
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; David
Villasmil <david.villasmil.work(a)gmail.com>om>; Daniel-Constantin Mierla
<miconda(a)gmail.com>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
5:24 p.m.
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman <bkaufman(a)nexvortex.com> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>rg>; David
Villasmil <david.villasmil.work(a)gmail.com>om>; Daniel-Constantin Mierla
<miconda(a)gmail.com>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
6:47 p.m.
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
2 Jul
2 Jul
12:11 a.m.
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Ben Kaufman
<bkaufman(a)nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
7:53 a.m.
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Daniel Graham
<dan(a)cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Ben Kaufman
<bkaufman(a)nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:08 a.m.
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(),
is the Identity header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
Daniel Graham <dan(a)cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 6:11 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
Ben Kaufman <bkaufman(a)nexvortex.com>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 12:49 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t
know what happens with the ncurses in sngrep, but I finally looked
them side by side and …. “Hey! This one’s missing bytes!”
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> *On Behalf Of
*Daniel W. Graham
*Sent:* Thursday, July 1, 2021 10:25 AM
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman <bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting
and pasting the identity header from sngrep, which looks to have
dropped a few bytes on the line break. Any chance that’s what
you’re doing, too?
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> *On Behalf Of
*Daniel W. Graham
*Sent:* Wednesday, June 30, 2021 10:31 PM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>; Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> on behalf of Daniel
Graham <dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>
*Date: *Wednesday, June 30, 2021 at 5:32 PM
*To: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>, "miconda(a)gmail.com
<mailto:miconda@gmail.com>" <miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users Mailing
List"
<sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a
verification that the identity header/payload was correct before
activating new changes.
I will do further testing and share results. Just found it odd
that the header would decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>
*Date: *Wednesday, June 30, 2021 at 4:06 PM
*To: *"miconda(a)gmail.com <mailto:miconda@gmail.com>"
<miconda(a)gmail.com <mailto:miconda@gmail.com>>, "Kamailio (SER) -
Users Mailing List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Cc: *Daniel Graham <dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) =
$(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) =
$(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with
Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in Python that it is ASCII, I
remember I had to do decoding when porting kamcli to work with
Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with
and see if can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in
identity header generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2
in position 27: invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not
reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply
only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
8:19 a.m.
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda(a)gmail.com" <miconda(a)gmail.com>
Reply-To: "miconda(a)gmail.com" <miconda(a)gmail.com>
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>rg>,
Daniel Graham <dan(a)cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman@nexvortex.com><mailto:bkaufman@nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
8:41 a.m.
Then secsipid_add_identity() or msg_apply_changes() failed -- do you get
error messages? Try to run with debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Reply-To: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Date: *Friday, July 2, 2021 at 2:09 AM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>rg>, Daniel Graham <dan(a)cmsinter.net>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and
msg_apply_changes(), is the Identity header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> on behalf of Daniel
Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 6:11 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> on behalf of Ben
Kaufman <bkaufman(a)nexvortex.com> <mailto:bkaufman@nexvortex.com>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 12:49 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t
know what happens with the ncurses in sngrep, but I finally looked
them side by side and …. “Hey! This one’s missing bytes!”
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> *On Behalf Of *Daniel
W. Graham
*Sent:* Thursday, July 1, 2021 10:25 AM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my
cutting and pasting the identity header from sngrep, which
looks to have dropped a few bytes on the line break. Any
chance that’s what you’re doing, too?
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> *On Behalf Of
*Daniel W. Graham
*Sent:* Wednesday, June 30, 2021 10:31 PM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>; Daniel-Constantin
Mierla <miconda(a)gmail.com <mailto:miconda@gmail.com>>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> on behalf of
Daniel Graham <dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>
*Date: *Wednesday, June 30, 2021 at 5:32 PM
*To: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>, "miconda(a)gmail.com
<mailto:miconda@gmail.com>" <miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a
verification that the identity header/payload was correct
before activating new changes.
I will do further testing and share results. Just found it odd
that the header would decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>
*Date: *Wednesday, June 30, 2021 at 4:06 PM
*To: *"miconda(a)gmail.com <mailto:miconda@gmail.com>"
<miconda(a)gmail.com <mailto:miconda@gmail.com>>, "Kamailio
(SER) - Users Mailing List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Cc: *Daniel Graham <dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) =
$(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) =
$(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with
Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in Python that it is ASCII, I
remember I had to do decoding when porting kamcli to work
with Python3 -- had to change from using directly the
variables received as parameter to a decoded value,
something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test
with and see if can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in
identity header generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte
0xc2 in position 27: invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not
reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not
reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
8:58 a.m.
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda(a)gmail.com" <miconda(a)gmail.com>
Reply-To: "miconda(a)gmail.com" <miconda(a)gmail.com>
Date: Friday, July 2, 2021 at 2:41 AM
To: Daniel Graham <dan(a)cmsinter.net>et>, "Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed -- do you get error messages?
Try to run with debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman@nexvortex.com><mailto:bkaufman@nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
9:12 a.m.
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Reply-To: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Date: *Friday, July 2, 2021 at 2:41 AM
*To: *Daniel Graham <dan(a)cmsinter.net>et>, "Kamailio (SER) - Users
Mailing List" <sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed -- do you
get error messages? Try to run with debug=3 for seeing more details in
the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 2:09 AM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>, Daniel Graham
<dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and
msg_apply_changes(), is the Identity header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by
secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> on behalf of
Daniel Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 6:11 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> on behalf of Ben
Kaufman <bkaufman(a)nexvortex.com> <mailto:bkaufman@nexvortex.com>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 12:49 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I
don’t know what happens with the ncurses in sngrep, but I
finally looked them side by side and …. “Hey! This one’s
missing bytes!”
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> *On Behalf Of
*Daniel W. Graham
*Sent:* Thursday, July 1, 2021 10:25 AM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>>
wrote:
I observed a similar behavior, but it was the result of my
cutting and pasting the identity header from sngrep, which
looks to have dropped a few bytes on the line break. Any
chance that’s what you’re doing, too?
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> *On Behalf
Of *Daniel W. Graham
*Sent:* Wednesday, June 30, 2021 10:31 PM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> on behalf of
Daniel Graham <dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Date: *Wednesday, June 30, 2021 at 5:32 PM
*To: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>,
"miconda(a)gmail.com <mailto:miconda@gmail.com>"
<miconda(a)gmail.com <mailto:miconda@gmail.com>>, "Kamailio
(SER) - Users Mailing List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do
a verification that the identity header/payload was
correct before activating new changes.
I will do further testing and share results. Just found it
odd that the header would decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>
*Date: *Wednesday, June 30, 2021 at 4:06 PM
*To: *"miconda(a)gmail.com <mailto:miconda@gmail.com>"
<miconda(a)gmail.com <mailto:miconda@gmail.com>>, "Kamailio
(SER) - Users Mailing List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Cc: *Daniel Graham <dan(a)cmsinter.net
<mailto:dan@cmsinter.net>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) =
$(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) =
$(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried
with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in Python that it is ASCII,
I remember I had to do decoding when porting kamcli to
work with Python3 -- had to change from using directly
the variables received as parameter to a decoded
value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to
test with and see if can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload
in identity header generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode
byte 0xc2 in position 27: invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only
to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do
not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not
reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
3:10 p.m.
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla <miconda(a)gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:41 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>, "Kamailio
(SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed -- do you get error messages?
Try to run with debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman@nexvortex.com><mailto:bkaufman@nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
3:24 p.m.
What do you mean? Do you have msg_apply_changes() in the config, it is
executed but has no effect?
Or you don't have msg_apply_changes() in the config and thus not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
> On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
> <miconda(a)gmail.com> wrote:
>
>
>
> Can you doublecheck msg_apply_changes() is executed?
>
> What version are you using?
>
> Cheers,
> Daniel
>
> On 02.07.21 08:58, Daniel W. Graham wrote:
>>
>> I don’t see any issues in the log.
>>
>>
>>
>> The identity header is being sent but still nothing in $mb
>>
>>
>>
>> Daniel W. Graham, CTO
>>
>> CMSInter.net LLC
>>
>> DIRECT (989) 400-4230
>>
>>
>>
>> INTERNET | TELEPHONE | MANAGED IT
>>
>>
>>
>>
>>
>> *From: *"miconda(a)gmail.com" <miconda(a)gmail.com>
>> *Reply-To: *"miconda(a)gmail.com" <miconda(a)gmail.com>
>> *Date: *Friday, July 2, 2021 at 2:41 AM
>> *To: *Daniel Graham <dan(a)cmsinter.net>et>, "Kamailio (SER) - Users
>> Mailing List" <sr-users(a)lists.kamailio.org>
>> *Subject: *Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> Then secsipid_add_identity() or msg_apply_changes() failed -- do you
>> get error messages? Try to run with debug=3 for seeing more details
>> in the logs.
>>
>> Cheers,
>> Daniel
>>
>> On 02.07.21 08:19, Daniel W. Graham wrote:
>>
>> Identity is not in $mb.
>>
>>
>>
>> Daniel W. Graham, CTO
>>
>> CMSInter.net LLC
>>
>> DIRECT (989) 400-4230
>>
>>
>>
>> INTERNET | TELEPHONE | MANAGED IT
>>
>>
>>
>>
>>
>> *From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
>> <miconda(a)gmail.com> <mailto:miconda@gmail.com>
>> *Reply-To: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
>> <miconda(a)gmail.com> <mailto:miconda@gmail.com>
>> *Date: *Friday, July 2, 2021 at 2:09 AM
>> *To: *"Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org>
>> <mailto:sr-users@lists.kamailio.org>, Daniel Graham
>> <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
>> *Subject: *Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> Hello,
>>
>> try to print $mb after secsipid_add_identity() and
>> msg_apply_changes(), is the Identity header there?
>>
>> Cheers,
>> Daniel
>>
>> On 02.07.21 07:53, Daniel W. Graham wrote:
>>
>> I need to immediately get the uuid created by
>> secsipid_add_identity().
>>
>>
>>
>> Is there a way to immediately read a header after its added?
>>
>>
>>
>> I tried msg_apply_changes() but $hdr(Identity) is null.
>>
>>
>>
>> -dan
>>
>>
>>
>>
>>
>> *From: *sr-users <sr-users-bounces(a)lists.kamailio.org>
>> <mailto:sr-users-bounces@lists.kamailio.org> on behalf of
>> Daniel Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
>> *Reply-To: *"Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org>
>> <mailto:sr-users@lists.kamailio.org>
>> *Date: *Thursday, July 1, 2021 at 6:11 PM
>> *To: *"Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org>
>> <mailto:sr-users@lists.kamailio.org>
>> *Subject: *Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> Confirmed it was due to the sngrep copy. Thanks for
>> mentioning it!
>>
>>
>>
>> -dan
>>
>>
>>
>>
>>
>> *From: *sr-users <sr-users-bounces(a)lists.kamailio.org>
>> <mailto:sr-users-bounces@lists.kamailio.org> on behalf of
>> Ben Kaufman <bkaufman(a)nexvortex.com>
>> <mailto:bkaufman@nexvortex.com>
>> *Reply-To: *"Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org>
>> <mailto:sr-users@lists.kamailio.org>
>> *Date: *Thursday, July 1, 2021 at 12:49 PM
>> *To: *"Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org>
>> <mailto:sr-users@lists.kamailio.org>
>> *Subject: *Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> Dump the header to your log file, and copy it from there. I
>> don’t know what happens with the ncurses in sngrep, but I
>> finally looked them side by side and …. “Hey! This one’s
>> missing bytes!”
>>
>>
>>
>> *Ben Kaufman*
>>
>> /Sr. VoIP Engineer/
>>
>>
>> P:
>>
>> E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
>>
>> 24 hour client support: 855.639.6300 <tel:+18556396300>
>>
>>
>>
>>
>> *From:* sr-users <sr-users-bounces(a)lists.kamailio.org>
>> <mailto:sr-users-bounces@lists.kamailio.org> *On Behalf Of
>> *Daniel W. Graham
>> *Sent:* Thursday, July 1, 2021 10:25 AM
>> *To:* Kamailio (SER) - Users Mailing List
>> <sr-users(a)lists.kamailio.org>
>> <mailto:sr-users@lists.kamailio.org>
>> *Subject:* Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> Haha, yep :) I wondered if that was biting me.
>>
>>
>>
>> -dan
>>
>>
>>
>>
>>
>>
>>
>> On Jul 1, 2021, at 11:07 AM, Ben Kaufman
>> <bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>>
>> wrote:
>>
>> I observed a similar behavior, but it was the result of
>> my cutting and pasting the identity header from sngrep,
>> which looks to have dropped a few bytes on the line
>> break. Any chance that’s what you’re doing, too?
>>
>>
>>
>> *Ben Kaufman*
>>
>> /Sr. VoIP Engineer/
>>
>>
>> P:
>>
>> E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
>>
>> 24 hour client support: 855.639.6300 <tel:+18556396300>
>>
>>
>>
>>
>> *From:* sr-users <sr-users-bounces(a)lists.kamailio.org
>> <mailto:sr-users-bounces@lists.kamailio.org>> *On Behalf
>> Of *Daniel W. Graham
>> *Sent:* Wednesday, June 30, 2021 10:31 PM
>> *To:* Kamailio (SER) - Users Mailing List
>> <sr-users(a)lists.kamailio.org
>> <mailto:sr-users@lists.kamailio.org>>; David Villasmil
>> <david.villasmil.work(a)gmail.com
>> <mailto:david.villasmil.work@gmail.com>>;
>> Daniel-Constantin Mierla <miconda(a)gmail.com
>> <mailto:miconda@gmail.com>>
>> *Subject:* Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> Here is an example, payload taken from Identity header.
>>
>>
>>
>> Identity was added with secsipid_add_identity
>>
>>
>>
>> Payload test:
>>
>> $var(test) =
>>
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
>>
>> xlogl("L_WARN",
"$(var(test){s.decode.base64t})\n");
>>
>>
>>
>> Result is:
>>
>>
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
>>
>>
>>
>> -dan
>>
>>
>>
>>
>>
>> *From: *sr-users <sr-users-bounces(a)lists.kamailio.org
>> <mailto:sr-users-bounces@lists.kamailio.org>> on behalf
>> of Daniel Graham <dan(a)cmsinter.net
>> <mailto:dan@cmsinter.net>>
>> *Reply-To: *"Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org
>> <mailto:sr-users@lists.kamailio.org>>
>> *Date: *Wednesday, June 30, 2021 at 5:32 PM
>> *To: *David Villasmil <david.villasmil.work(a)gmail.com
>> <mailto:david.villasmil.work@gmail.com>>,
>> "miconda(a)gmail.com <mailto:miconda@gmail.com>"
>> <miconda(a)gmail.com <mailto:miconda@gmail.com>>,
>> "Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org
>> <mailto:sr-users@lists.kamailio.org>>
>> *Subject: *Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> That’s the same way I am doing it, I was just trying to
>> do a verification that the identity header/payload was
>> correct before activating new changes.
>>
>>
>>
>> I will do further testing and share results. Just found
>> it odd that the header would decode but payload wouldn’t.
>>
>>
>>
>> Daniel W. Graham, CTO
>>
>> CMSInter.net LLC
>>
>> DIRECT (989) 400-4230
>>
>>
>>
>> INTERNET | TELEPHONE | MANAGED IT
>>
>>
>>
>>
>>
>> *From: *David Villasmil <david.villasmil.work(a)gmail.com
>> <mailto:david.villasmil.work@gmail.com>>
>> *Date: *Wednesday, June 30, 2021 at 4:06 PM
>> *To: *"miconda(a)gmail.com <mailto:miconda@gmail.com>"
>> <miconda(a)gmail.com <mailto:miconda@gmail.com>>,
>> "Kamailio (SER) - Users Mailing List"
>> <sr-users(a)lists.kamailio.org
>> <mailto:sr-users@lists.kamailio.org>>
>> *Cc: *Daniel Graham <dan(a)cmsinter.net
>> <mailto:dan@cmsinter.net>>
>> *Subject: *Re: [SR-Users] SECSIPID Identity Decode
>>
>>
>>
>> I DO IT WITH:
>>
>>
>>
>> # Break JWT
>> $var(jwt1) =
>> $(hdr(Identity){s.select,0,.}{s.decode.base64t});
>> $var(jwt2) =
>> $(hdr(Identity){s.select,1,.}{s.decode.base64t});
>>
>>
>>
>>
>> Regards,
>>
>>
>>
>> David Villasmil
>>
>> email: david.villasmil.work(a)gmail.com
>> <mailto:david.villasmil.work@gmail.com>
>>
>> phone: +34669448337
>>
>>
>>
>>
>>
>> On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
>> <miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
>>
>> Hello,
>>
>> not familiar with python functions, have you tried
>> with Kamailio transformation?
>>
>>
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
>>
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
>>
>> Maybe you have to specify in Python that it is
>> ASCII, I remember I had to do decoding when porting
>> kamcli to work with Python3 -- had to change from
>> using directly the variables received as parameter
>> to a decoded value, something like:
>>
>> prefix = tprefix.encode("ascii",
"ignore").decode()
>>
>> Also, if you can, share the identity header here to
>> test with and see if can be reproduced.
>>
>> Cheers,
>> Daniel
>>
>> On 30.06.21 21:14, Daniel W. Graham wrote:
>>
>> I am unable to base64url decode the json payload
>> in identity header generated by secsipid.
>>
>>
>>
>> (Using python for test)
>>
>> decoded_payload = url64.decode(‘payload’)
>>
>> UnicodeDecodeError: 'utf-8' codec can't decode
>> byte 0xc2 in position 27: invalid continuation byte
>>
>>
>>
>> Header decodes fine this way but not payload.
>>
>>
>>
>> Is this an issue with the payload encoding?
>>
>>
>>
>> Kamailio 5.5
>>
>>
>>
>> Daniel W. Graham, CTO
>>
>> CMSInter.net LLC
>>
>> DIRECT (989) 400-4230
>>
>>
>>
>> INTERNET | TELEPHONE | MANAGED IT
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> __________________________________________________________
>>
>> Kamailio - Users Mailing List - Non Commercial Discussions
>>
>> * sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
>>
>> Important: keep the mailing list in the recipients, do not
reply only to the sender!
>>
>> Edit mailing list options or unsubscribe:
>>
>> *
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
>>
>> --
>>
>> Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
>>
>> www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
>>
>> __________________________________________________________
>> Kamailio - Users Mailing List - Non Commercial
>> Discussions
>> * sr-users(a)lists.kamailio.org
>> <mailto:sr-users@lists.kamailio.org>
>> Important: keep the mailing list in the recipients,
>> do not reply only to the sender!
>> Edit mailing list options or unsubscribe:
>> *
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
>>
>> __________________________________________________________
>> Kamailio - Users Mailing List - Non Commercial Discussions
>> * sr-users(a)lists.kamailio.org
>> <mailto:sr-users@lists.kamailio.org>
>> Important: keep the mailing list in the recipients, do
>> not reply only to the sender!
>> Edit mailing list options or unsubscribe:
>> *
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>> <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
>>
>>
>>
>>
>> __________________________________________________________
>>
>> Kamailio - Users Mailing List - Non Commercial Discussions
>>
>> * sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
>>
>> Important: keep the mailing list in the recipients, do not reply only to
the sender!
>>
>> Edit mailing list options or unsubscribe:
>>
>> * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
>>
>> --
>>
>> Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
>>
>> www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
>>
>> --
>> Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
>> www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
> --
> Daniel-Constantin Mierla -- www.asipto.com
> www.twitter.com/miconda -- www.linkedin.com/in/miconda
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
6:18 p.m.
Sorry. msg_apply_changes() was in config and I didn’t see the execution in debug.
I just changed to this and receive “Failed to apply changes”.
if (!msg_apply_changes()) {
xlogl("L_WARN", "Failed to apply changes\n");
}
-dan
From: "miconda(a)gmail.com" <miconda(a)gmail.com>
Reply-To: "miconda(a)gmail.com" <miconda(a)gmail.com>
Date: Friday, July 2, 2021 at 9:24 AM
To: Daniel Graham <dan(a)cmsinter.net>
Cc: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
What do you mean? Do you have msg_apply_changes() in the config, it is executed but has no
effect?
Or you don't have msg_apply_changes() in the config and thus not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
<miconda@gmail.com><mailto:miconda@gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:41 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>, "Kamailio
(SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed -- do you get error messages?
Try to run with debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman@nexvortex.com><mailto:bkaufman@nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
7:46 p.m.
If msg_apply_changes() fails, then there has to be other error messages
in the logs. Don't you see any?
Cheers,
Daniel
On 02.07.21 18:18, Daniel W. Graham wrote:
Sorry. msg_apply_changes() was in config and I didn’t see the
execution in debug.
I just changed to this and receive “Failed to apply changes”.
if (!msg_apply_changes()) {
xlogl("L_WARN", "Failed to apply changes\n");
}
-dan
*From: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Reply-To: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Date: *Friday, July 2, 2021 at 9:24 AM
*To: *Daniel Graham <dan(a)cmsinter.net>
*Cc: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
What do you mean? Do you have msg_apply_changes() in the config, it is
executed but has no effect?
Or you don't have msg_apply_changes() in the config and thus not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com> <mailto:miconda@gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 2:41 AM
*To: *Daniel Graham <dan(a)cmsinter.net>
<mailto:dan@cmsinter.net>, "Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed
-- do you get error messages? Try to run with debug=3 for
seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 2:09 AM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>, Daniel Graham
<dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and
msg_apply_changes(), is the Identity header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by
secsipid_add_identity().
Is there a way to immediately read a header after
its added?
I tried msg_apply_changes() but $hdr(Identity) is
null.
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> on
behalf of Daniel Graham <dan(a)cmsinter.net>
<mailto:dan@cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 6:11 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks
for mentioning it!
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> on
behalf of Ben Kaufman <bkaufman(a)nexvortex.com>
<mailto:bkaufman@nexvortex.com>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 12:49 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from
there. I don’t know what happens with the ncurses
in sngrep, but I finally looked them side by side
and …. “Hey! This one’s missing bytes!”
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300
<tel:+18556396300>
*From:* sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> *On
Behalf Of *Daniel W. Graham
*Sent:* Thursday, July 1, 2021 10:25 AM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the
result of my cutting and pasting the identity
header from sngrep, which looks to have
dropped a few bytes on the line break. Any
chance that’s what you’re doing, too?
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300
<tel:+18556396300>
*From:* sr-users
<sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>>
*On Behalf Of *Daniel W. Graham
*Sent:* Wednesday, June 30, 2021 10:31 PM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; David
Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from
Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN",
"$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan(a)cmsinter.net
<mailto:dan@cmsinter.net>>
*Reply-To: *"Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Date: *Wednesday, June 30, 2021 at 5:32 PM
*To: *David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>,
"miconda(a)gmail.com <mailto:miconda@gmail.com>"
<miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio (SER) -
Users Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just
trying to do a verification that the identity
header/payload was correct before activating
new changes.
I will do further testing and share results.
Just found it odd that the header would decode
but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>
*Date: *Wednesday, June 30, 2021 at 4:06 PM
*To: *"miconda(a)gmail.com
<mailto:miconda@gmail.com>" <miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio (SER) -
Users Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Cc: *Daniel Graham <dan(a)cmsinter.net
<mailto:dan@cmsinter.net>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) =
$(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) =
$(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM
Daniel-Constantin Mierla <miconda(a)gmail.com
<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have
you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in Python that
it is ASCII, I remember I had to do
decoding when porting kamcli to work with
Python3 -- had to change from using
directly the variables received as
parameter to a decoded value, something like:
prefix = tprefix.encode("ascii",
"ignore").decode()
Also, if you can, share the identity
header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the
json payload in identity header
generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec
can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not
payload.
Is this an issue with the payload
encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial
Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do
not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
www.twitter.com/miconda
<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non
Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the
recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial
Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the
recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only
to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
7:54 p.m.
I checked twice but nothing. I will test again in case I am missing something, I found it
odd too that its failing but no error in debug.
I tried adding another header and msg_apply_changes() before the call to
secsipid_add_identity(), and that doesnt show up in $mb or accessible by $hdr() either.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda(a)gmail.com" <miconda(a)gmail.com>
Reply-To: "miconda(a)gmail.com" <miconda(a)gmail.com>
Date: Friday, July 2, 2021 at 1:46 PM
To: Daniel Graham <dan(a)cmsinter.net>
Cc: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
If msg_apply_changes() fails, then there has to be other error messages in the logs.
Don't you see any?
Cheers,
Daniel
On 02.07.21 18:18, Daniel W. Graham wrote:
Sorry. msg_apply_changes() was in config and I didn’t see the execution in debug.
I just changed to this and receive “Failed to apply changes”.
if (!msg_apply_changes()) {
xlogl("L_WARN", "Failed to apply changes\n");
}
-dan
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 9:24 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Cc: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
What do you mean? Do you have msg_apply_changes() in the config, it is executed but has no
effect?
Or you don't have msg_apply_changes() in the config and thus not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
<miconda@gmail.com><mailto:miconda@gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:41 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>, "Kamailio
(SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed -- do you get error messages?
Try to run with debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman@nexvortex.com><mailto:bkaufman@nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
10:40 p.m.
Found it. record_route bit me.
ERROR: <core> [core/msg_translator.c:3355]: sip_msg_apply_changes(): cannot apply
msg changes after adding record-route header - it breaks conditional 2nd header
Assuming not but thought I’d ask, any way to access a header before its added to the
message?
Future request, that secsipid_add_identity() returns the auto generated uuid for origid.
-dan
From: sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of Daniel Graham
<dan(a)cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
Date: Friday, July 2, 2021 at 1:54 PM
To: "miconda(a)gmail.com" <miconda(a)gmail.com>
Cc: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I checked twice but nothing. I will test again in case I am missing something, I found it
odd too that its failing but no error in debug.
I tried adding another header and msg_apply_changes() before the call to
secsipid_add_identity(), and that doesnt show up in $mb or accessible by $hdr() either.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda(a)gmail.com" <miconda(a)gmail.com>
Reply-To: "miconda(a)gmail.com" <miconda(a)gmail.com>
Date: Friday, July 2, 2021 at 1:46 PM
To: Daniel Graham <dan(a)cmsinter.net>
Cc: "Kamailio (SER) - Users Mailing List" <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
If msg_apply_changes() fails, then there has to be other error messages in the logs.
Don't you see any?
Cheers,
Daniel
On 02.07.21 18:18, Daniel W. Graham wrote:
Sorry. msg_apply_changes() was in config and I didn’t see the execution in debug.
I just changed to this and receive “Failed to apply changes”.
if (!msg_apply_changes()) {
xlogl("L_WARN", "Failed to apply changes\n");
}
-dan
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 9:24 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Cc: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
What do you mean? Do you have msg_apply_changes() in the config, it is executed but has no
effect?
Or you don't have msg_apply_changes() in the config and thus not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
<miconda@gmail.com><mailto:miconda@gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:41 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>, "Kamailio
(SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed -- do you get error messages?
Try to run with debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman@nexvortex.com><mailto:bkaufman@nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
5 Jul
5 Jul
9:44 a.m.
Hello,
On 02.07.21 22:40, Daniel W. Graham wrote:
Found it. record_route bit me.
ERROR: <core> [core/msg_translator.c:3355]: sip_msg_apply_changes():
cannot apply msg changes after adding record-route header - it breaks
conditional 2nd header
Assuming not but thought I’d ask, any way to access a header before
its added to the message?
the devel version has a function that stores the result in a variable
and then can be added to the headers via append_hf():
*
https://www.kamailio.org/docs/modules/devel/modules/secsipid.html#secsipid.…
Future request, that secsipid_add_identity() returns the auto
generated uuid for origid.
An option would be to add it the variable $secsipid(...) for convenience.
Right now you can parse the result with transformations and jannson/json
modules to extract the origid field.
Or use the uuid module to generate the origid yourself in kamailio.cfg
and provided as parameter.
Cheers,
Daniel
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
Daniel Graham <dan(a)cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Date: *Friday, July 2, 2021 at 1:54 PM
*To: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Cc: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I checked twice but nothing. I will test again in case I am missing
something, I found it odd too that its failing but no error in debug.
I tried adding another header and msg_apply_changes() before the call
to secsipid_add_identity(), and that doesnt show up in $mb or
accessible by $hdr() either.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Reply-To: *"miconda(a)gmail.com" <miconda(a)gmail.com>
*Date: *Friday, July 2, 2021 at 1:46 PM
*To: *Daniel Graham <dan(a)cmsinter.net>
*Cc: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
If msg_apply_changes() fails, then there has to be other error
messages in the logs. Don't you see any?
Cheers,
Daniel
On 02.07.21 18:18, Daniel W. Graham wrote:
Sorry. msg_apply_changes() was in config and I didn’t see the
execution in debug.
I just changed to this and receive “Failed to apply changes”.
if (!msg_apply_changes()) {
xlogl("L_WARN", "Failed to apply changes\n");
}
-dan
*From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 9:24 AM
*To: *Daniel Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Cc: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
What do you mean? Do you have msg_apply_changes() in the config,
it is executed but has no effect?
Or you don't have msg_apply_changes() in the config and thus not
executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com> <mailto:miconda@gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 2:41 AM
*To: *Daniel Graham <dan(a)cmsinter.net>
<mailto:dan@cmsinter.net>, "Kamailio (SER) - Users
Mailing List" <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes()
failed -- do you get error messages? Try to run with
debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 2:09 AM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and
msg_apply_changes(), is the Identity header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by
secsipid_add_identity().
Is there a way to immediately read a header
after its added?
I tried msg_apply_changes() but $hdr(Identity)
is null.
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan(a)cmsinter.net>
<mailto:dan@cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 6:11 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy.
Thanks for mentioning it!
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman(a)nexvortex.com>
<mailto:bkaufman@nexvortex.com>
*Reply-To: *"Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 12:49 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it
from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked
them side by side and …. “Hey! This one’s
missing bytes!”
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300
<tel:+18556396300>
*From:* sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org>
*On Behalf Of *Daniel W. Graham
*Sent:* Thursday, July 1, 2021 10:25 AM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was
the result of my cutting and pasting the
identity header from sngrep, which looks
to have dropped a few bytes on the line
break. Any chance that’s what you’re
doing, too?
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300
<tel:+18556396300>
*From:* sr-users
<sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>>
*On Behalf Of *Daniel W. Graham
*Sent:* Wednesday, June 30, 2021 10:31 PM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>;
David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>>
*Subject:* Re: [SR-Users] SECSIPID
Identity Decode
Here is an example, payload taken from
Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN",
"$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham
<dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Reply-To: *"Kamailio (SER) - Users
Mailing List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Date: *Wednesday, June 30, 2021 at 5:32 PM
*To: *David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>,
"miconda(a)gmail.com
<mailto:miconda@gmail.com>"
<miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio
(SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Subject: *Re: [SR-Users] SECSIPID
Identity Decode
That’s the same way I am doing it, I was
just trying to do a verification that the
identity header/payload was correct before
activating new changes.
I will do further testing and share
results. Just found it odd that the header
would decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>
*Date: *Wednesday, June 30, 2021 at 4:06 PM
*To: *"miconda(a)gmail.com
<mailto:miconda@gmail.com>"
<miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio
(SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Cc: *Daniel Graham <dan(a)cmsinter.net
<mailto:dan@cmsinter.net>>
*Subject: *Re: [SR-Users] SECSIPID
Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) =
$(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) =
$(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM
Daniel-Constantin Mierla
<miconda(a)gmail.com
<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions,
have you tried with Kamailio
transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in Python
that it is ASCII, I remember I had to
do decoding when porting kamcli to
work with Python3 -- had to change
from using directly the variables
received as parameter to a decoded
value, something like:
prefix = tprefix.encode("ascii",
"ignore").decode()
Also, if you can, share the identity
header here to test with and see if
can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode
the json payload in identity
header generated by secsipid.
(Using python for test)
decoded_payload =
url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec
can't decode byte 0xc2 in position
27: invalid continuation byte
Header decodes fine this way but
not payload.
Is this an issue with the payload
encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial
Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients,
do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
www.twitter.com/miconda
<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non
Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in
the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non
Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the
recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply
only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
6 Jul
6 Jul
4:21 p.m.
As a convenience fact, having all the common values from the header and payload would be
nice. Decoding base64 and JSON is not particularly taxing, but when it comes to
verification and subsequent fraud mitigation, the ability to grab the data from the token
is necessary. Knowing the attestation, iat, orig and dest values become very useful here,
and having quick accessors for the value would eliminate a few lines of boiler plate and
enhance script readability.
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Daniel-Constantin
Mierla
Sent: Monday, July 5, 2021 2:44 AM
To: Daniel W. Graham <dan(a)cmsinter.net>et>; Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
On 02.07.21 22:40, Daniel W. Graham wrote:
Found it. record_route bit me.
ERROR: <core> [core/msg_translator.c:3355]: sip_msg_apply_changes(): cannot apply
msg changes after adding record-route header - it breaks conditional 2nd header
Assuming not but thought I’d ask, any way to access a header before its added to the
message?
the devel version has a function that stores the result in a variable and then can be
added to the headers via append_hf():
*
https://www.kamailio.org/docs/modules/devel/modules/secsipid.html#secsipid.…
Future request, that secsipid_add_identity() returns the auto generated uuid for origid.
An option would be to add it the variable $secsipid(...) for convenience.
Right now you can parse the result with transformations and jannson/json modules to
extract the origid field.
Or use the uuid module to generate the origid yourself in kamailio.cfg and provided as
parameter.
Cheers,
Daniel
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Friday, July 2, 2021 at 1:54 PM
To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Cc: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I checked twice but nothing. I will test again in case I am missing something, I found it
odd too that its failing but no error in debug.
I tried adding another header and msg_apply_changes() before the call to
secsipid_add_identity(), and that doesnt show up in $mb or accessible by $hdr() either.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 1:46 PM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Cc: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
If msg_apply_changes() fails, then there has to be other error messages in the logs.
Don't you see any?
Cheers,
Daniel
On 02.07.21 18:18, Daniel W. Graham wrote:
Sorry. msg_apply_changes() was in config and I didn’t see the execution in debug.
I just changed to this and receive “Failed to apply changes”.
if (!msg_apply_changes()) {
xlogl("L_WARN", "Failed to apply changes\n");
}
-dan
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 9:24 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Cc: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
What do you mean? Do you have msg_apply_changes() in the config, it is executed but has no
effect?
Or you don't have msg_apply_changes() in the config and thus not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
<miconda@gmail.com><mailto:miconda@gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:41 AM
To: Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>, "Kamailio
(SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or msg_apply_changes() failed -- do you get error messages?
Try to run with debug=3 for seeing more details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Reply-To: "miconda@gmail.com"<mailto:miconda@gmail.com>
<miconda@gmail.com><mailto:miconda@gmail.com>
Date: Friday, July 2, 2021 at 2:09 AM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity() and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created by secsipid_add_identity().
Is there a way to immediately read a header after its added?
I tried msg_apply_changes() but $hdr(Identity) is null.
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham <dan@cmsinter.net><mailto:dan@cmsinter.net>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 6:11 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman@nexvortex.com><mailto:bkaufman@nexvortex.com>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Date: Thursday, July 1, 2021 at 12:49 PM
To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t know what happens with
the ncurses in sngrep, but I finally looked them side by side and …. “Hey! This one’s
missing bytes!”
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org><mailto:sr-users-bounces@lists.kamailio.org>
On Behalf Of Daniel W. Graham
Sent: Thursday, July 1, 2021 10:25 AM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org><mailto:sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman
<bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting and pasting the
identity header from sngrep, which looks to have dropped a few bytes on the line break.
Any chance that’s what you’re doing, too?
Ben Kaufman
Sr. VoIP Engineer
P:
E: bkaufman@nexvortex.com<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300<tel:+18556396300>
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
On Behalf Of Daniel W. Graham
Sent: Wednesday, June 30, 2021 10:31 PM
To: Kamailio (SER) - Users Mailing List
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; David
Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla <miconda@gmail.com<mailto:miconda@gmail.com>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
From: sr-users
<sr-users-bounces@lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Reply-To: "Kamailio (SER) - Users Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Date: Wednesday, June 30, 2021 at 5:32 PM
To: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>,
"miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a verification that the
identity header/payload was correct before activating new changes.
I will do further testing and share results. Just found it odd that the header would
decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
From: David Villasmil
<david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>>
Date: Wednesday, June 30, 2021 at 4:06 PM
To: "miconda@gmail.com<mailto:miconda@gmail.com>"
<miconda@gmail.com<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users
Mailing List"
<sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>
Cc: Daniel Graham <dan@cmsinter.net<mailto:dan@cmsinter.net>>
Subject: Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) = $(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) = $(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work@gmail.com<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
Maybe you have to specify in Python that it is ASCII, I remember I had to do decoding when
porting kamcli to work with Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with and see if can be
reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in identity header generated by
secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2 in position 27:
invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
6:57 p.m.
At this moment, if using jansson/json modules feels complicated, then
try to leverage inline execution of a JavaScript snippet via app_jsdt
(which has no external library). The JSON can be parsed into a JS
structure, making it easy to access the fields. I use this mechanism
every time I need to do complex operations with json documents.
An unrelated example, which can help getting started, was posted in
another discussion a while ago:
* https://lists.kamailio.org/pipermail/sr-users/2021-March/112156.html
Of course, having the attributes accessible via native cfg variables
would be good, but from my point of view it doesn't look like having any
spare time anytime soon. Obviously, contributions are welcome!
Cheers,
Daniel
On 06.07.21 16:21, Ben Kaufman wrote:
As a convenience fact, having all the common values from the header
and payload would be nice. Decoding base64 and JSON is not
particularly taxing, but when it comes to verification and subsequent
fraud mitigation, the ability to grab the data from the token is
necessary. Knowing the attestation, iat, orig and dest values become
very useful here, and having quick accessors for the value would
eliminate a few lines of boiler plate and enhance script readability.
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> *On Behalf Of
*Daniel-Constantin Mierla
*Sent:* Monday, July 5, 2021 2:44 AM
*To:* Daniel W. Graham <dan(a)cmsinter.net>et>; Kamailio (SER) - Users
Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Hello,
On 02.07.21 22:40, Daniel W. Graham wrote:
Found it. record_route bit me.
ERROR: <core> [core/msg_translator.c:3355]:
sip_msg_apply_changes(): cannot apply msg changes after adding
record-route header - it breaks conditional 2nd header
Assuming not but thought I’d ask, any way to access a header
before its added to the message?
the devel version has a function that stores the result in a variable
and then can be added to the headers via append_hf():
*
https://www.kamailio.org/docs/modules/devel/modules/secsipid.html#secsipid.…
<https://www.kamailio.org/docs/modules/devel/modules/secsipid.html#secsipid.f.secsipid_build_identity>
Future request, that secsipid_add_identity() returns the auto
generated uuid for origid.
An option would be to add it the variable $secsipid(...) for convenience.
Right now you can parse the result with transformations and
jannson/json modules to extract the origid field.
Or use the uuid module to generate the origid yourself in kamailio.cfg
and provided as parameter.
Cheers,
Daniel
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org> on behalf of Daniel
Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Date: *Friday, July 2, 2021 at 1:54 PM
*To: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Cc: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I checked twice but nothing. I will test again in case I am
missing something, I found it odd too that its failing but no
error in debug.
I tried adding another header and msg_apply_changes() before the
call to secsipid_add_identity(), and that doesnt show up in $mb or
accessible by $hdr() either.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 1:46 PM
*To: *Daniel Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Cc: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
If msg_apply_changes() fails, then there has to be other error
messages in the logs. Don't you see any?
Cheers,
Daniel
On 02.07.21 18:18, Daniel W. Graham wrote:
Sorry. msg_apply_changes() was in config and I didn’t see the
execution in debug.
I just changed to this and receive “Failed to apply changes”.
if (!msg_apply_changes()) {
xlogl("L_WARN", "Failed to apply changes\n");
}
-dan
*From: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com" <mailto:miconda@gmail.com>
<miconda(a)gmail.com> <mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 9:24 AM
*To: *Daniel Graham <dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Cc: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org> <mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
What do you mean? Do you have msg_apply_changes() in the
config, it is executed but has no effect?
Or you don't have msg_apply_changes() in the config and thus
not executed?
Cheers,
Daniel
On 02.07.21 15:10, Daniel W. Graham wrote:
Its not being executed. Version 5.5
Daniel W. Graham, CTO
CMS Internet LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
On Jul 2, 2021, at 3:12 AM, Daniel-Constantin Mierla
<miconda(a)gmail.com> <mailto:miconda@gmail.com> wrote:
Can you doublecheck msg_apply_changes() is executed?
What version are you using?
Cheers,
Daniel
On 02.07.21 08:58, Daniel W. Graham wrote:
I don’t see any issues in the log.
The identity header is being sent but still
nothing in $mb
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 2:41 AM
*To: *Daniel Graham <dan(a)cmsinter.net>
<mailto:dan@cmsinter.net>, "Kamailio (SER) - Users
Mailing List" <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Then secsipid_add_identity() or
msg_apply_changes() failed -- do you get error
messages? Try to run with debug=3 for seeing more
details in the logs.
Cheers,
Daniel
On 02.07.21 08:19, Daniel W. Graham wrote:
Identity is not in $mb.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Reply-To: *"miconda(a)gmail.com"
<mailto:miconda@gmail.com> <miconda(a)gmail.com>
<mailto:miconda@gmail.com>
*Date: *Friday, July 2, 2021 at 2:09 AM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>, Daniel
Graham <dan(a)cmsinter.net>
<mailto:dan@cmsinter.net>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Hello,
try to print $mb after secsipid_add_identity()
and msg_apply_changes(), is the Identity
header there?
Cheers,
Daniel
On 02.07.21 07:53, Daniel W. Graham wrote:
I need to immediately get the uuid created
by secsipid_add_identity().
Is there a way to immediately read a
header after its added?
I tried msg_apply_changes() but
$hdr(Identity) is null.
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Daniel Graham
<dan(a)cmsinter.net> <mailto:dan@cmsinter.net>
*Reply-To: *"Kamailio (SER) - Users
Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 6:11 PM
*To: *"Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID
Identity Decode
Confirmed it was due to the sngrep copy.
Thanks for mentioning it!
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org>
on behalf of Ben Kaufman
<bkaufman(a)nexvortex.com>
<mailto:bkaufman@nexvortex.com>
*Reply-To: *"Kamailio (SER) - Users
Mailing List"
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 12:49 PM
*To: *"Kamailio (SER) - Users Mailing
List" <sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID
Identity Decode
Dump the header to your log file, and copy
it from there. I don’t know what happens
with the ncurses in sngrep, but I finally
looked them side by side and …. “Hey!
This one’s missing bytes!”
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300
<tel:+18556396300>
*From:* sr-users
<sr-users-bounces(a)lists.kamailio.org>
<mailto:sr-users-bounces@lists.kamailio.org>
*On Behalf Of *Daniel W. Graham
*Sent:* Thursday, July 1, 2021 10:25 AM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org>
<mailto:sr-users@lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID
Identity Decode
Haha, yep :) I wondered if that was biting
me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben
Kaufman <bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it
was the result of my cutting and
pasting the identity header from
sngrep, which looks to have dropped a
few bytes on the line break. Any
chance that’s what you’re doing, too?
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300
<tel:+18556396300>
*From:* sr-users
<sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>>
*On Behalf Of *Daniel W. Graham
*Sent:* Wednesday, June 30, 2021 10:31 PM
*To:* Kamailio (SER) - Users Mailing
List <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>;
David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>;
Daniel-Constantin Mierla
<miconda(a)gmail.com
<mailto:miconda@gmail.com>>
*Subject:* Re: [SR-Users] SECSIPID
Identity Decode
Here is an example, payload taken from
Identity header.
Identity was added with
secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN",
"$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users
<sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>>
on behalf of Daniel Graham
<dan(a)cmsinter.net
<mailto:dan@cmsinter.net>>
*Reply-To: *"Kamailio (SER) - Users
Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Date: *Wednesday, June 30, 2021 at
5:32 PM
*To: *David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>,
"miconda(a)gmail.com
<mailto:miconda@gmail.com>"
<miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio
(SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Subject: *Re: [SR-Users] SECSIPID
Identity Decode
That’s the same way I am doing it, I
was just trying to do a verification
that the identity header/payload was
correct before activating new changes.
I will do further testing and share
results. Just found it odd that the
header would decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>
*Date: *Wednesday, June 30, 2021 at
4:06 PM
*To: *"miconda(a)gmail.com
<mailto:miconda@gmail.com>"
<miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio
(SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Cc: *Daniel Graham <dan(a)cmsinter.net
<mailto:dan@cmsinter.net>>
*Subject: *Re: [SR-Users] SECSIPID
Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) =
$(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) =
$(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM
Daniel-Constantin Mierla
<miconda(a)gmail.com
<mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python
functions, have you tried with
Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in
Python that it is ASCII, I
remember I had to do decoding when
porting kamcli to work with
Python3 -- had to change from
using directly the variables
received as parameter to a decoded
value, something like:
prefix = tprefix.encode("ascii",
"ignore").decode()
Also, if you can, share the
identity header here to test with
and see if can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W.
Graham wrote:
I am unable to base64url
decode the json payload in
identity header generated by
secsipid.
(Using python for test)
decoded_payload =
url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8'
codec can't decode byte 0xc2
in position 27: invalid
continuation byte
Header decodes fine this way
but not payload.
Is this an issue with the
payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial
Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the
recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
www.twitter.com/miconda
<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda
<http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List -
Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list
in the recipients, do not reply
only to the sender!
Edit mailing list options or
unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non
Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in
the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not
reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com
<http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
2 Jul
2 Jul
7:54 p.m.
Syslog showed many mysql/accounting related error between the time the
response arrived to proxy and when proxy crashed (example below). So
perhaps accounting failure delayed processing of the reply. pp Don't
know the reason for the myslq problems.
-- Juha
Jul 2 06:06:51 rox2 /usr/bin/sip-proxy[21315]: ERROR: db_mysql [km_dbase.c:122]
: db_mysql_submit_query(): driver error on query: Lost connection to MySQL serve
r during query (2013)
Jul 2 06:06:51 rox2 /usr/bin/sip-proxy[21315]: ERROR: db_mysql [km_dbase.c:145]
: db_mysql_async_exec_task(): failed to execute query [insert into `accounting`
(`method`,`from_tag`,`to_tag`,`callid`,`response_code`,`response_reason`,`t] on
async worker
5 Jul
5 Jul
9:54 a.m.
New subject: SECSIPID Identity Decode ( crash when sending reply)
I assume this was mistakenly replied in the wrong thread, instead of the
message with subject: [SR-Users] crash when sending reply.
With the async insert for acc module, the reply should have been
released quickly, not waiting in the SIP worker process for insert to
happen. Could you see the response being sent out in the sip traces
before the crash?
Cheers,
Daniel
On 02.07.21 19:54, Juha Heinanen wrote:
Syslog showed many mysql/accounting related error
between the time the
response arrived to proxy and when proxy crashed (example below). So
perhaps accounting failure delayed processing of the reply. pp Don't
know the reason for the myslq problems.
-- Juha
Jul 2 06:06:51 rox2 /usr/bin/sip-proxy[21315]: ERROR: db_mysql [km_dbase.c:122]
: db_mysql_submit_query(): driver error on query: Lost connection to MySQL serve
r during query (2013)
Jul 2 06:06:51 rox2 /usr/bin/sip-proxy[21315]: ERROR: db_mysql [km_dbase.c:145]
: db_mysql_async_exec_task(): failed to execute query [insert into `accounting`
(`method`,`from_tag`,`to_tag`,`callid`,`response_code`,`response_reason`,`t] on
async worker
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
2 Jul
2 Jul
8:07 a.m.
Good to know that sngrep is truncating long headers when it displays
them. Maybe it should be reported.
What I noticed with sngrep is that sometimes it does not display the
traffic in the pcap file while ngrep shows the packets. I didn't get the
time yet to dig in further and report back to the project -- mentioning
it here, might be useful for other to know about.
Cheers,
Daniel
On 02.07.21 00:11, Daniel W. Graham wrote:
Confirmed it was due to the sngrep copy. Thanks for mentioning it!
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org> on behalf of
Ben Kaufman <bkaufman(a)nexvortex.com>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Date: *Thursday, July 1, 2021 at 12:49 PM
*To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
Dump the header to your log file, and copy it from there. I don’t
know what happens with the ncurses in sngrep, but I finally looked
them side by side and …. “Hey! This one’s missing bytes!”
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org> *On Behalf Of
*Daniel W. Graham
*Sent:* Thursday, July 1, 2021 10:25 AM
*To:* Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Haha, yep :) I wondered if that was biting me.
-dan
On Jul 1, 2021, at 11:07 AM, Ben Kaufman <bkaufman(a)nexvortex.com
<mailto:bkaufman@nexvortex.com>> wrote:
I observed a similar behavior, but it was the result of my cutting
and pasting the identity header from sngrep, which looks to have
dropped a few bytes on the line break. Any chance that’s what
you’re doing, too?
*Ben Kaufman*
/Sr. VoIP Engineer/
P:
E: bkaufman(a)nexvortex.com <mailto:bkaufman@nexvortex.com>
24 hour client support: 855.639.6300 <tel:+18556396300>
*From:* sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> *On Behalf Of
*Daniel W. Graham
*Sent:* Wednesday, June 30, 2021 10:31 PM
*To:* Kamailio (SER) - Users Mailing List
<sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>; David Villasmil
<david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>; Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>>
*Subject:* Re: [SR-Users] SECSIPID Identity Decode
Here is an example, payload taken from Identity header.
Identity was added with secsipid_add_identity
Payload test:
$var(test) =
"eyJhdHRlc3QiOiJBIiwiZGVzdCI6eyJ0biI6I5ODkyODkyMjgwIl19LCJpYXQiOjE2MjUxMDk2MzQsIm9yaWciOnsidG4iOiI5ODk0MDA0MjMwIn0sIm9yaWdpZCI6IjNmYmE4NTg0LTRkNzMtNGU2NC04NDc5LTQ5MjU2ZGIyMWFhYSJ9";
xlogl("L_WARN", "$(var(test){s.decode.base64t})\n");
Result is:
{"attest":"A","dest":{"tn":#���#��##�#002%���&�#027B#�#023c#S#023#003�#023sB�&�&�r#��'F�#�#���C#003#003C#3#002'��&�&�v�B#�Vc�s#006f"�&6#026#022�CVCB�#023c3#022�3#0066#�#026#6#026S�r'
-dan
*From: *sr-users <sr-users-bounces(a)lists.kamailio.org
<mailto:sr-users-bounces@lists.kamailio.org>> on behalf of Daniel
Graham <dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Reply-To: *"Kamailio (SER) - Users Mailing List"
<sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>
*Date: *Wednesday, June 30, 2021 at 5:32 PM
*To: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>, "miconda(a)gmail.com
<mailto:miconda@gmail.com>" <miconda(a)gmail.com
<mailto:miconda@gmail.com>>, "Kamailio (SER) - Users Mailing
List"
<sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
That’s the same way I am doing it, I was just trying to do a
verification that the identity header/payload was correct before
activating new changes.
I will do further testing and share results. Just found it odd
that the header would decode but payload wouldn’t.
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
*From: *David Villasmil <david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>>
*Date: *Wednesday, June 30, 2021 at 4:06 PM
*To: *"miconda(a)gmail.com <mailto:miconda@gmail.com>"
<miconda(a)gmail.com <mailto:miconda@gmail.com>>, "Kamailio (SER) -
Users Mailing List" <sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>>
*Cc: *Daniel Graham <dan(a)cmsinter.net <mailto:dan@cmsinter.net>>
*Subject: *Re: [SR-Users] SECSIPID Identity Decode
I DO IT WITH:
# Break JWT
$var(jwt1) =
$(hdr(Identity){s.select,0,.}{s.decode.base64t});
$var(jwt2) =
$(hdr(Identity){s.select,1,.}{s.decode.base64t});
Regards,
David Villasmil
email: david.villasmil.work(a)gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337
On Wed, Jun 30, 2021 at 8:48 PM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Hello,
not familiar with python functions, have you tried with
Kamailio transformation?
https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64…
<https://www.kamailio.org/wiki/cookbooks/5.5.x/transformations#sdecodebase64url>
Maybe you have to specify in Python that it is ASCII, I
remember I had to do decoding when porting kamcli to work with
Python3 -- had to change from using directly the variables
received as parameter to a decoded value, something like:
prefix = tprefix.encode("ascii", "ignore").decode()
Also, if you can, share the identity header here to test with
and see if can be reproduced.
Cheers,
Daniel
On 30.06.21 21:14, Daniel W. Graham wrote:
I am unable to base64url decode the json payload in
identity header generated by secsipid.
(Using python for test)
decoded_payload = url64.decode(‘payload’)
UnicodeDecodeError: 'utf-8' codec can't decode byte 0xc2
in position 27: invalid continuation byte
Header decodes fine this way but not payload.
Is this an issue with the payload encoding?
Kamailio 5.5
Daniel W. Graham, CTO
CMSInter.net LLC
DIRECT (989) 400-4230
INTERNET | TELEPHONE | MANAGED IT
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply only to the
sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not
reply only to the sender!
Edit mailing list options or unsubscribe:
*
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
Important: keep the mailing list in the recipients, do not reply
only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
1018
days inactive
1024
days old
28 comments
5 participants
participants (5)
-
Ben Kaufman -
Daniel W. Graham -
Daniel-Constantin Mierla -
David Villasmil -
Juha Heinanen