hello friends,
iam using sems-0.1.0 and ser-0.8.12 my main aim to place the announcement if at all any body call to the number who is not logged in so my ser.cfg looks like this
but in dialer ( xlite ) show s trying for fewminutes then says timed out. ser.cfg ----------
debug=7 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tmloadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/vm.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") modparam("usrloc","db_url","mysql://ser:heslo@localhost:3306/ser".so" # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; };
# if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { save("location"); break; }; if ( method=="ACK" || method=="INVITE" || method=="BYE" || method=="CANCEL" ) { if (!t_newtran()) { sl_send_reply("500","could not create transaction"); break; }; t_reply("100","Trying - just wait a minute !");
if (method=="INVITE") { log("in to the invite"); if(!vm("/tmp/am_fifo","announcement") log("in to the invite"); if(!vm("/tmp/am_fifo","announcement")) { log("could not contact announcement server"); t_reply("500","error contacting sems"); }; break; } else if (method=="BYE" || method=="CANCEL") { if(!vm("/tmp/am_fifo","bye")) { t_reply("500","error contacting sems"); }; break; }; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); }; }
-----------
and my sems.conf looks like this ----------- # $Id: sems.conf.sample,v 1.1.2.1 2003/08/28 19:13:25 rco Exp $ # # sems.conf.sample # # Sip Express Media Server (sems) # # sample configuration file # # # whitespaces (spaces and tabs) are ignored # comments start with a "#" and may be used inline # # example: option=value1, value2 # i like this option # ################################## # global parameters # ################################## # optional parameter: fork={yes|no} # # - specifies if sems should run in daemon mode (background) fork=yes # optional parameter: stderr={yes|no} # # - debug mode: do not fork and log to stderr stderr=no # optional parameter: loglevel={0|1|2|3} # # - sets log level (error=0, warning=1, info=2, debug=3)
# - sets log level (error=0, warning=1, info=2, debug=3) loglevel=3 # optional parameter: fifo_name=<filename> # # - path and file name of our fifo file fifo_name=/tmp/am_fifo # optional parameter: ser_fifo_name=<filename> # # - path and file name of Ser's fifo file ser_fifo_name=/tmp/ser_fifo # optional parameter: plugin_path=<path> # # - sets the path to the plug-ins # - may be absolute or relative to CWD plugin_path=/usr/local/lib/sems/plug-in/
################################## # voicemail specific parameters # ################################## # optional parameter: announce_path=<path> # # - sets the path where announce files are searched for announce_path=/usr/local/lib/sems/audio/ # optional parameter: default_announce=<filename> # # - sets the name of the default announce WAV file default_announce=default_en.wav # - sets the name of the default announce WAV file default_announce=default_en.wav # optional parameter: max_record=<seconds> # # - maximum record time max_record=30 # optional parameter: smtp_server=<hostname> # # - sets address of smtp server smtp_server=localhost # optional parameter: smtp_port=<port> # # - sets port of smtp server smtp_port=25
################################## # module specific parameters # ################################## # add more module configurations here (inline or external): # # config.mymodule=<filename> # or # config.mymodule=inline # ... # config.mymodule=end
-----------
the logs are as follows ------
12(15776) vm: calculated route:
12(15776) vm: next r-uri: sip:216105@xxx.xxx.xxx.18:5060
12(15776) parse_headers: flags=-1
12(15776) query="select email_address from subscriber where username='214103'"
12(15776) vm: write_to_vm_fifo: <0.2
sip_request.announcement
INVITE
214103
varala@xxx.xxx.in
xxx.xxx.xxx.in
xxx.xxx.xxx.19
.
sip:214103@xxx.xxx.xxx.in
sip:216105@xxx.xxx.xxx.18:5060
hello sip:216105@xxx.xxx.xxx.in
D4DD8ACF-F8FE-11D8-8FE6-00E018FCDC33@xxx.xxx.xxx.18
3583624574
.
48216
14502:756140263
.
.
P-MsgFlags: 0
.
v=0
o=216105 15926530 15926613 IN IP4 xxx.xxx.xxx.18
s=X-Lite
c=IN IP4 xxx.xxx.xxx.18
t=0 0
m=audio 8000 RTP/AVP 0 8 3 98 97 101
a=rtpmap:0 pcmu/8000
a=rtpmap:8 pcma/8000
a=rtpmap:3 gsm/8000
a=rtpmap:98 iLBC/8000
a=rtpmap:97 speex/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
12(15776) DEBUG: write_to_vm_fifo: write completed
12(15776) DEBUG: add_to_tail_of_timer[0]: 0x422b9304
12(15776) receive_msg: cleaning up
14(15786) udp_rcv_loop: probing packet received from xxx.xxx.xxx.18 50195
15(15790) udp_rcv_loop: probing packet received from xxx.xxx.xxx.18 50195
18(15802) DEBUG: timer routine:0,tl=0x422b9304 next=(nil)
18(15802) DEBUG: FR_handler:stop retr. and send CANCEL (0x422b91c8)
18(15802) ->>>>>>>>> T_code=100, new_code=408
18(15802) DEBUG: relay_reply: branch=0, save=0, relay=0
18(15802) parse_headers: flags=-1
18(15802) check_via_address(xxx.xxx.xxx.18, xxx.xxx.xxx.18, 0)
18(15802) DEBUG: reply relayed. buf=0x80c3d38: SIP/2.0 4..., shmem=0x422ba890: SIP/2.0 4
18(15802) DEBUG: add_to_tail_of_timer[4]: 0x422b927c
18(15802) DEBUG: add_to_tail_of_timer[0]: 0x422b9290
18(15802) DEBUG: final_response_handler : done
9(15761) SIP Request:
9(15761) method: <ACK>
9(15761) uri: sip:214103@xxx.xxx.xxx.in
9(15761) version: <SIP/2.0>
9(15761) parse_headers: flags=1
9(15761) Found param type 235, <rport> = <n/a>; state=6
9(15761) Found param type 232, <branch> = <z9hG4bKD4DD8AD0F8FE11D88FE600E018FCDC33>; state=16
9(15761) end of header reached, state=5
9(15761) parse_headers: Via found, flags=1
9(15761) parse_headers: this is the first via
9(15761) After parse_msg...
9(15761) preparing to run routing scripts...
9(15761) DEBUG : sl_filter_ACK: to late to be a local ACK!
9(15761) DEBUG : is_maxfwd_present: searching for max_forwards header
9(15761) parse_headers: flags=128
9(15761) DEBUG: add_param: tag=a6a1c5f60faecf035a1ae5b6e96e979a-9573
9(15761) end of header reached, state=29
9(15761) DEBUG: get_hdr_field: <To> [74]; uri=[sip:214103@xxx.xxx.xxx.in]
9(15761) DEBUG: to body [sip:214103@xxx.xxx.xxx.in]
9(15761) get_hdr_field: cseq <CSeq>: <48216> <ACK>
9(15761) DEBUG: is_maxfwd_present: value = 70
9(15761) DEBUG: add_param: tag=3583624574
9(15761) end of header reached, state=29
9(15761) parse_headers: flags=256
9(15761) DEBUG: get_hdr_body : content_length=0
9(15761) found end of header
9(15761) find_first_route(): No Route headers found
9(15761) loose_route(): There is no Route HF
9(15761) check_self - checking if host==us: 17==9 && [xxx.xxx.xxx.in] == [127.0.0.1]
9(15761) check_self - checking if port 5060 matches port 5060
9(15761) check_self - checking if host==us: 17==13 && [xxx.xxx.xxx.in] == [xxx.xxx.xxx.19]
9(15761) check_self - checking if port 5060 matches port 5060
9(15761) DEBUG: t_addifnew: msg id=2 , global msg id=0 , T on entrance=0xffffffff
9(15761) parse_headers: flags=-1
9(15761) parse_headers: flags=60
9(15761) t_lookup_request: start searching: hash=14502, isACK=1
9(15761) DEBUG: RFC3261 transaction matched, tid=D4DD8AD0F8FE11D88FE600E018FCDC33
9(15761) DEBUG: t_lookup_request: transaction found (T=0x422b91c8)
9(15761) DEBUG: cleanup_uacs: RETR/FR timers reset
9(15761) DEBUG: add_to_tail_of_timer[2]: 0x422b9210
9(15761) receive_msg: cleaning up
18(15802) DEBUG: timer routine:0,tl=0x422b9290 next=(nil)
18(15802) DEBUG: timer routine:4,tl=0x422b927c next=(nil)
18(15802) DEBUG: timer routine:2,tl=0x422b9210 next=(nil)
18(15802) DEBUG: wait_handler : removing 0x422b91c8 from table
18(15802) DEBUG: delete transaction 0x422b91c8
18(15802) DEBUG: wait_handler : done
--------
but i could not able to listen any audio , audi file is there in the correct path
with regards ser die hard
--------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - Send 10MB messages!