I’m currently and OpenSIPS user and I really want to be able to use their software on OpenWRT, but I have found it really hard to cross-compile. Is there a possibility to run Kamailio as a mid-registrar? For my application this is required, and I haven’t been able to find any information on this.
Hi Mark,
On Fri, Jan 18, 2019 at 04:37:05PM -0500, Mark Thomas wrote:
I’m currently and OpenSIPS user and I really want to be able to use their software on OpenWRT, but I have found it really hard to cross-compile. Is there a possibility to run Kamailio as a mid-registrar? For my application this is required, and I haven’t been able to find any information on this.
Please see this thread:
https://puck.nether.net/pipermail/voiceops/2018-June/007716.html
-- Alex
By way of further answer:
While it can perhaps be argued that OpenSIPS have done a better job of "packaging" certain very specific functionalities from a marketing and ease-of-use standpoint, I've learned time and time again that the raw functionality for equivalent uses - and the flexibility that comes with it, by virtue of the lower-level interface - almost always exists in Kamailio as well. This is certainly one of those cases. :-) I learned something in that thread.
On Fri, Jan 18, 2019 at 04:38:31PM -0500, Alex Balashov wrote:
Hi Mark,
On Fri, Jan 18, 2019 at 04:37:05PM -0500, Mark Thomas wrote:
I’m currently and OpenSIPS user and I really want to be able to use their software on OpenWRT, but I have found it really hard to cross-compile. Is there a possibility to run Kamailio as a mid-registrar? For my application this is required, and I haven’t been able to find any information on this.
Please see this thread:
https://puck.nether.net/pipermail/voiceops/2018-June/007716.html
-- Alex
-- Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Am Freitag, 18. Januar 2019, 22:37:05 CET schrieb Mark Thomas:
I’m currently and OpenSIPS user and I really want to be able to use their software on OpenWRT, but I have found it really hard to cross-compile. Is there a possibility to run Kamailio as a mid-registrar? For my application this is required, and I haven’t been able to find any information on this.
Hi Mark,
as Alex mentioned, you can implement this functionality in Kamailio as well. If you need more hints, just ask on sr-users with some more details.
Another option would be of course to port this module to Kamailio. There would be some changes necessary due to different module interfaces, but it shouldn't be that difficult for a developer. For development questions contact the sr- dev list.
The module could be even included in the Kamailio repository, if there is somebody that is willing to maintain it.
Best regards,
Henning
-
Alex Balashov -
Henning Westerholt -
Mark Thomas