26 Jun
2003
26 Jun
'03
11:59 p.m.
I am trying to get SER 0.8.10 working with a VegaStream Vega 100 VoIP gateway and the SER
appears to be ignoring the 200 OK message from the Vega signaling that the call has been
answered on the PSTN side.
I saw a ticket to this effect in the bugs area, but the patch for that did not help.
Attached is an NGREP log from the SER machine and a SIP LOG from the VegaStream units
point of view.
Everything looks good from both points of view, but there should be an Ack sent back to
the Vega right after the first 200 message. The rest of the 200 messages are retrying in
case the first message got lost.
Any ideas?
_______________________________________________
Sean Robertson
NETXUSA
p. 800-289-6389
f. 864-233-4344 "Ask me about Voice over IP."
http://www.netxusa.com/
27 Jun
27 Jun
12:16 a.m.
On Thu, Jun 26, 2003 at 05:59:55PM -0400, Sean P. Robertson wrote:
I am trying to get SER 0.8.10 working with a
VegaStream Vega 100 VoIP gateway and the SER appears to be ignoring the 200 OK message
from the Vega signaling that the call has been answered on the PSTN side.
I saw a ticket to this effect in the bugs area, but the patch for that did not help.
Attached is an NGREP log from the SER machine and a SIP LOG from the VegaStream units
point of view.
Everything looks good from both points of view, but there should be an Ack sent back to
the Vega right after the first 200 message. The rest of the 200 messages are retrying in
case the first message got lost.
Any ideas?
The Cisco ATA is guilty. Its a known bug. The request URI of the ACK
from the ATA is not the same as the original request URI of the INVITE
(which has to be the same according to the RFC).
Some SER users reported that some of the last firmware updates for ATA
fixed the problem, but they had also some other penaltys (search the
mailing list archives for details).
The secodn option is that their is patch for SER available (sorry i dont
have the URL available right now) which disables the URI matching.
Regards
Nils Ohlmeier
8:12 a.m.
SER is not ignoring 200s -- they are relayed from .62 to .61. The
Vega acknowledges them as well. What happens is that the ACK gets
lost in SER, most likely due to a script misconfiguration.
-jiri
At 11:59 PM 6/26/2003, Sean P. Robertson wrote:
I am trying to get SER 0.8.10 working with a VegaStream
Vega 100 VoIP gateway and the SER appears to be ignoring the 200 OK message from the Vega
signaling that the call has been answered on the PSTN side.
I saw a ticket to this effect in the bugs area, but the patch for that did not help.
Attached is an NGREP log from the SER machine and a SIP LOG from the VegaStream units
point of view.
Everything looks good from both points of view, but there should be an Ack sent back to
the Vega right after the first 200 message. The rest of the 200 messages are retrying in
case the first message got lost.
Any ideas?
_______________________________________________
Sean Robertson
NETXUSA
p. 800-289-6389
f. 864-233-4344 "Ask me about Voice over IP."
<http://www.netxusa.com/>http://www.netxusa.com/
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
7618
days inactive
7619
days old
2 comments
3 participants
participants (3)
-
Jiri Kuthan -
nils＠ohlmeier.de -
Sean P. Robertson