1 Oct
2005
1 Oct
'05
1:02 a.m.
Hi,
My company wants me to hop on to Linux/Unix from Bill Gates, and to make it
even better I am suppose to get upto speed writing modules to enhance our
SER deployment.
What experience do I have writing in ANSI C "0", "ZERO",
"nada",
BUT, I have been programming for over three yrs now so the logic is not an
issue.
My question, whats the best way to start, I am currently going through the
documentation on SER Admin, need to have a plan.
I know no one likes newbees, but hey any help would be highly appreciated.
Thanks
Viq
1 Oct
1 Oct
1:15 a.m.
I am in a similar situation, as far as the ANSI C goes. What has helped
me is to jump in, find a bug and try to figure out what is going on.
Granted you might not be as lucky as me on your first try in finding
bugs, but trust me even if you don't there is plenty to look at. I can
promise you it will be confusing and infuriating, but slowly things will
begin to make sense.
Start by setting up a basic SER installation on a Linux box. Once you
get it set up and working then you can try out different features.
Don't be afraid to send messages to this group, I have found them very
helpful and attentive to all levels of questions.
good luck,
Zach Keatts
Software Engineer
Nuvio.com
viquar syed wrote:
Hi,
My company wants me to hop on to Linux/Unix from Bill Gates, and to
make it even better I am suppose to get upto speed writing modules to
enhance our SER deployment.
What experience do I have writing in ANSI C "0", "ZERO",
"nada",
BUT, I have been programming for over three yrs now so the logic is
not an issue.
My question, whats the best way to start, I am currently going through
the documentation on SER Admin, need to have a plan.
I know no one likes newbees, but hey any help would be highly appreciated.
Thanks
Viq
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
1:53 a.m.
Viq,
If you're going to be coding C on Linux then I'd recommend you read up
on GDB which is the GNU Debugger.
If you search amazon.com or other bookstores you'll find a few books
on the subject.
If you're new to Linux and coming from Windoz then you'll have a bit
of a culture shock as to how things are done. There is no fancy VC++
IDE to step through your code. The good news is that GDB is more than
enough to debug most C code
Regards,
Paul
On 9/30/05, zkeatts <zkeatts(a)nuvio.com> wrote:
I am in a similar situation, as far as the ANSI C
goes. What has helped
me is to jump in, find a bug and try to figure out what is going on.
Granted you might not be as lucky as me on your first try in finding
bugs, but trust me even if you don't there is plenty to look at. I can
promise you it will be confusing and infuriating, but slowly things will
begin to make sense.
Start by setting up a basic SER installation on a Linux box. Once you
get it set up and working then you can try out different features.
Don't be afraid to send messages to this group, I have found them very
helpful and attentive to all levels of questions.
good luck,
Zach Keatts
Software Engineer
Nuvio.com
viquar syed wrote:
Hi,
My company wants me to hop on to Linux/Unix from Bill Gates, and to
make it even better I am suppose to get upto speed writing modules to
enhance our SER deployment.
What experience do I have writing in ANSI C "0", "ZERO",
"nada",
BUT, I have been programming for over three yrs now so the logic is
not an issue.
My question, whats the best way to start, I am currently going through
the documentation on SER Admin, need to have a plan.
I know no one likes newbees, but hey any help would be highly appreciated.
Thanks
Viq
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
7047
days inactive
7047
days old
2 comments
3 participants
participants (3)
-
Paul Hazlett -
viquar syed -
zkeatts