Hello,

that's correct now. You have children=4 in your script and there are 4 children per interface plus attendant, fifo server and timer, so together you get 11 processes.

Jan.

On 11-03 13:47, mjkane@attbi.com wrote:

Hi Nils, I've copied my ser.cfg file into the body of this email. As you can see 'fork=yes'. I've also copied the output of the serctl ps. As you can see my config is pretty basic at this point. Thansk Mike

0 8512 attendant 1 8514 receiver child=0 sock=0 @ 127.0.0.1::5060 2 8515 receiver child=1 sock=0 @ 127.0.0.1::5060 3 8516 receiver child=2 sock=0 @ 127.0.0.1::5060 4 8517 receiver child=3 sock=0 @ 127.0.0.1::5060 5 8518 receiver child=0 sock=1 @ 10.100.100.243::5060 6 8519 receiver child=1 sock=1 @ 10.100.100.243::5060 7 8520 receiver child=2 sock=1 @ 10.100.100.243::5060 8 8521 receiver child=3 sock=1 @ 10.100.100.243::5060 9 8522 fifo server 10 8539 timer

# # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "//usr/lib/ser/modules/mysql.so"

loadmodule "//usr/lib/ser/modules/sl.so" loadmodule "//usr/lib/ser/modules/tm.so" loadmodule "//usr/lib/ser/modules/rr.so" loadmodule "//usr/lib/ser/modules/maxfwd.so" loadmodule "//usr/lib/ser/modules/usrloc.so" loadmodule "//usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "//usr/lib/ser/modules/auth.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth", "secret", "alsdkhglaksdhfkloiwr") modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth", "password_column", "password")

# ------------------------- request routing logic -------------------

# main routing logic

route{

    # initial sanity checks -- messages with
    # max_forwars==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
            sl_send_reply("483","Too Many Hops");
            break;
    };
    if (len_gt( max_len )) {
            sl_send_reply("513", "Message too big");

    };

    # Do strict routing if pre-loaded route headers present
    rewriteFromRoute();

    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri=~"to-talk.com") {

            if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("to-talk.com", "subscriber")) { www_challenge("to-talk.com", "0"); break; };

                    save("location");
                    break;
            };

            # native SIP destinations are handled using our USRLOC DB
            if (!lookup("location")) {

...

Hello Mike,

On Tuesday 11 March 2003 14:28, mjkane@attbi.com wrote:

...

Hello, I have sucessfully configured SER to connect to mysql, but, now when I execute ./ser start only 3 process are loaded. If I load SER using the default ser.cfg file it loads 11 processes. Any thoughts..

sounds like you configured 'fork=no'. Then you would have one timer process, one process for fifo, and one answering requests. You can check this with 'serctl ps'.

Greetings Nils

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers