best way to start kamailio at boot - sr-users - kamailio.org

List overview All Threads
Download

best way to start kamailio at boot

Re: [SR-Users] best way to start...

subscriber specific dialplan

Uri Shacked

24 Oct 2011 24 Oct '11

3:03 p.m.

Hi, what is the best way to start kamailio at boot? the example in the install is not working for me....

Attachments:

attachment.html (text/html — 185 bytes)

Reply

Show replies by date

Sammy Govind

24 Oct 24 Oct

3:23 p.m.

if chkconfig isn't working you can add the kamalio startup command in etc/rc.local file. On Mon, Oct 24, 2011 at 6:03 PM, Uri Shacked <ushacked(a)gmail.com> wrote:

Hi, what is the best way to start kamailio at boot? the example in the install is not working for me.... _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply

Alex Balashov

3:32 p.m.

On 10/24/2011 09:23 AM, Sammy Govind wrote:

if chkconfig isn't working you can add the kamalio startup command in etc/rc.local file.

Yes, but there is a reason why a service management layer exists on all Linux distributions. Many things can go wrong by starting complex services ad hoc that way, especially services with dependencies. If you want to be creative, be creative, but don't encourage poor practices to newbies. -- Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/

Reply

Uri Shacked

4 p.m.

hi again, i found out that on my centos 5.4 the command start-stop-daemon that the /etc/init.d/kamailio uses is not recognized. it is kamailio3.2 any ideas? On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked(a)gmail.com> wrote:

Hi, what is the best way to start kamailio at boot? the example in the install is not working for me....

Reply

Alex Balashov

4:11 p.m.

On 10/24/2011 10:00 AM, Uri Shacked wrote:

hi again, i found out that on my centos 5.4 the command start-stop-daemon that the /etc/init.d/kamailio uses is not recognized. it is kamailio3.2 any ideas?

Sounds like you are trying to use the Debian init script. Use the one intended for CentOS/Redhat environments instead. It is located in: sip-router/pkg/kamailio/rpm -- Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/

Reply

Klaus Darilion

25 Oct 25 Oct

12:38 a.m.

Test the startupscript if they work: /etc/init.d/kamailio start /etc/init.d/kamailio stop If this works, then make sure to have proper symlinks from the corresponding runlevel to the startup script. Do it manually or use the chkconfig tool. klaus On 24.10.2011 08:00, Uri Shacked wrote:

hi again, i found out that on my centos 5.4 the command start-stop-daemon that the /etc/init.d/kamailio uses is not recognized. it is kamailio3.2 any ideas? On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked(a)gmail.com <mailto:ushacked@gmail.com>> wrote: Hi, what is the best way to start kamailio at boot? the example in the install is not working for me.... _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Reply

Sammy Govind

1 p.m.

Thanks Alex, Hey Uri, can you check if you've /etc/init.d/kamailio file exists - open that file if exists and cross verify few parameters. Few of these are as follows PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=*/usr/local/sbin/kamailio* NAME=kamailio DESC=kamailio HOMEDIR=/var/run/ *PIDFILE*=$HOMEDIR/$NAME.pid DEFAULTS=*/etc/default/kamailio.default* RUN_KAMAILIO=yes Make sure /etc/default/kamailio.default file exits. here are the contents of my file. RUN_KAMAILIO=yes USER=kamailio GROUP=kamailio MEMORY=64 DUMP_CORE=no On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion < klaus.mailinglists(a)pernau.at> wrote:

Test the startupscript if they work: /etc/init.d/kamailio start /etc/init.d/kamailio stop If this works, then make sure to have proper symlinks from the corresponding runlevel to the startup script. Do it manually or use the chkconfig tool. klaus On 24.10.2011 08:00, Uri Shacked wrote:

hi again, i found out that on my centos 5.4 the command start-stop-daemon that the /etc/init.d/kamailio uses is not recognized. it is kamailio3.2 any ideas? On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked(a)gmail.com <mailto:ushacked@gmail.com>> wrote: Hi, what is the best way to start kamailio at boot? the example in the install is not working for me.... ______________________________**_________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http:/…

______________________________**_________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http:/…

Reply

Uri Shacked

1:18 p.m.

Hi. I already checked it all. The kamailio start and stop command did not work. The init script i used was for debian. Now i use another script, for centos. It works. I add the kamailio proccess with chkconfig tool. Thanks. On 10/25/11, Sammy Govind <govoiper(a)gmail.com> wrote:

Thanks Alex, Hey Uri, can you check if you've /etc/init.d/kamailio file exists - open that file if exists and cross verify few parameters. Few of these are as follows PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=*/usr/local/sbin/kamailio* NAME=kamailio DESC=kamailio HOMEDIR=/var/run/ *PIDFILE*=$HOMEDIR/$NAME.pid DEFAULTS=*/etc/default/kamailio.default* RUN_KAMAILIO=yes Make sure /etc/default/kamailio.default file exits. here are the contents of my file. RUN_KAMAILIO=yes USER=kamailio GROUP=kamailio MEMORY=64 DUMP_CORE=no On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion < klaus.mailinglists(a)pernau.at> wrote:

Test the startupscript if they work: /etc/init.d/kamailio start /etc/init.d/kamailio stop If this works, then make sure to have proper symlinks from the corresponding runlevel to the startup script. Do it manually or use the chkconfig tool. klaus On 24.10.2011 08:00, Uri Shacked wrote:

hi again, i found out that on my centos 5.4 the command start-stop-daemon that the /etc/init.d/kamailio uses is not recognized. it is kamailio3.2 any ideas? On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked(a)gmail.com <mailto:ushacked@gmail.com>> wrote: Hi, what is the best way to start kamailio at boot? the example in the install is not working for me.... ______________________________**_________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http:/…

______________________________**_________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http:/…

-- Sent from my mobile device

Reply

Uri Shacked

1 Feb 1 Feb

2:06 p.m.

Hi again.... i installed kamailio 3.2.2 today. i used the chkconfig tool to get kamailio run at boot. i edited both /etc/init.d/kamailio and /etc/default/kamailio files to run with 2048Mg of memory. now, when i run /etc/init.d/kamailio start, it starts with the right amount of memory. when i rum "kamailio" only, it starts with 32Mb.... i use centos 6.2 64bit. any ideas? On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked(a)gmail.com> wrote:

Hi. I already checked it all. The kamailio start and stop command did not work. The init script i used was for debian. Now i use another script, for centos. It works. I add the kamailio proccess with chkconfig tool. Thanks. On 10/25/11, Sammy Govind <govoiper(a)gmail.com> wrote:

Thanks Alex, Hey Uri, can you check if you've /etc/init.d/kamailio file exists - open that file if exists and cross verify few parameters. Few of these are as follows PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=*/usr/local/sbin/kamailio* NAME=kamailio DESC=kamailio HOMEDIR=/var/run/ *PIDFILE*=$HOMEDIR/$NAME.pid DEFAULTS=*/etc/default/kamailio.default* RUN_KAMAILIO=yes Make sure /etc/default/kamailio.default file exits. here are the

contents of

my file. RUN_KAMAILIO=yes USER=kamailio GROUP=kamailio MEMORY=64 DUMP_CORE=no On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion < klaus.mailinglists(a)pernau.at> wrote: > Test the startupscript if they work: > > /etc/init.d/kamailio start > /etc/init.d/kamailio stop > > If this works, then make sure to have proper symlinks from the > corresponding runlevel to the startup script. Do it manually or use the > chkconfig tool. > > klaus > > > On 24.10.2011 08:00, Uri Shacked wrote: > >> hi again, >> i found out that on my centos 5.4 the command start-stop-daemon that

the

>> /etc/init.d/kamailio uses is not recognized. >> it is kamailio3.2 any ideas? >> >> >> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked(a)gmail.com >> <mailto:ushacked@gmail.com>> wrote: >> >> Hi, >> what is the best way to start kamailio at boot? >> the example in the install is not working for me.... >> >> >> >> >> ______________________________**_________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<

http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

>> > > ______________________________**_________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<

http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

-- Sent from my mobile device

Reply

Jason Penton

2:18 p.m.

Hi Sammy, When you use the init script, it is starting Kamailio with the correct arguments to get the environment you wish (-m 2048 probably). If however, you just call kamailio these args are not there. Im not sure why you are running with kamailio command directly. Why don't you add your init script to the appropriate runlevel for auto startup? Cheers Jason On Wed, Feb 1, 2012 at 3:06 PM, Uri Shacked <ushacked(a)gmail.com> wrote:

Hi again.... i installed kamailio 3.2.2 today. i used the chkconfig tool to get kamailio run at boot. i edited both /etc/init.d/kamailio and /etc/default/kamailio files to run with 2048Mg of memory. now, when i run /etc/init.d/kamailio start, it starts with the right amount of memory. when i rum "kamailio" only, it starts with 32Mb.... i use centos 6.2 64bit. any ideas? On Tue, Oct 25, 2011 at 1:18 PM, Uri Shacked <ushacked(a)gmail.com> wrote:

Hi. I already checked it all. The kamailio start and stop command did not work. The init script i used was for debian. Now i use another script, for centos. It works. I add the kamailio proccess with chkconfig tool. Thanks. On 10/25/11, Sammy Govind <govoiper(a)gmail.com> wrote:

Thanks Alex, Hey Uri, can you check if you've /etc/init.d/kamailio file exists - open that file if exists and cross verify few parameters. Few of these are as follows PATH=/sbin:/bin:/usr/sbin:/usr/bin DAEMON=*/usr/local/sbin/kamailio* NAME=kamailio DESC=kamailio HOMEDIR=/var/run/ *PIDFILE*=$HOMEDIR/$NAME.pid DEFAULTS=*/etc/default/kamailio.default* RUN_KAMAILIO=yes Make sure /etc/default/kamailio.default file exits. here are the

contents of

my file. RUN_KAMAILIO=yes USER=kamailio GROUP=kamailio MEMORY=64 DUMP_CORE=no On Tue, Oct 25, 2011 at 3:38 AM, Klaus Darilion < klaus.mailinglists(a)pernau.at> wrote: > Test the startupscript if they work: > > /etc/init.d/kamailio start > /etc/init.d/kamailio stop > > If this works, then make sure to have proper symlinks from the > corresponding runlevel to the startup script. Do it manually or use the > chkconfig tool. > > klaus > > > On 24.10.2011 08:00, Uri Shacked wrote: > >> hi again, >> i found out that on my centos 5.4 the command start-stop-daemon that

the

>> /etc/init.d/kamailio uses is not recognized. >> it is kamailio3.2 any ideas? >> >> >> On Mon, Oct 24, 2011 at 3:03 PM, Uri Shacked <ushacked(a)gmail.com >> <mailto:ushacked@gmail.com>> wrote: >> >> Hi, >> what is the best way to start kamailio at boot? >> the example in the install is not working for me.... >> >> >> >> >> ______________________________**_________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing

list

>> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<

http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

>> > > ______________________________**_________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<

http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users>

-- Sent from my mobile device

_______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

This email is subject to the disclaimer of Smile Communications (PTY) Ltd. at http://www.smilecoms.com/disclaimer

Reply

4469

days inactive

4569

days old

sr-users@lists.kamailio.org

Manage subscription

9 comments

5 participants

tags (0)

participants (5)

Alex Balashov
Jason Penton
Klaus Darilion
Sammy Govind
Uri Shacked