I tried to change the config in ser.cfg , listen=192.168.10.1 ( private ip ) to listen=234.234.234.234 ( public ip ), but i get some error in "/var/log/messages" as below :

rtpproxy: Starting SER RTP Proxy server: rtpproxy rtpproxy: . rc: Starting rtpproxy: succeeded xfs: xfs startup succeeded xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/cyrillic (unreadable) ser: WARNING: fix_socket_list: could not rev. resolve 234.234.234.234 ser: WARNING: fix_socket_list: could not rev. resolve 234.234.234.234 ser: Listening on ser: udp: 234.234.234.234 [234.234.234.234]:5060 ser: tcp: 234.234.234.234 [234.234.234.234]:5060 ser: Aliases: ser: Jun 30 15:41:03 localhost ser: ser startup succeeded Jun 30 15:41:03 localhost /usr/local/sbin/ser[2356]: Maxfwd module- initializing Jun 30 15:41:05 localhost /usr/local/sbin/ser[2356]: INFO: udp_init: SO_RCVBUF is initially 65535 Jun 30 15:41:05 localhost /usr/local/sbin/ser[2356]: INFO: udp_init: SO_RCVBUF is finally 131070 Jun 30 15:41:05 localhost /usr/local/sbin/ser[2356]: ERROR: udp_init: bind(5, 0x80fd674, 16) on 234.234.234.234: Cannot assign requested address

tks a lot ! Freeman

Zeus Ng zeus.ng@isquare.com.au 說： Are you running SER in the private address space (10.x, 172.x or 192.168.x)? That does not run well unless you know how to use record_route_preset() and advertised_address. I recommend you move your SER to public address space.

-----Original Message----- From: serusers-bounces@lists.iptel.org On Behalf Of Freeman Sent: Thursday, 30 June 2005 12:49 PM To: serusers@lists.iptel.org

Hi,

I tried to follow the manual "GettingStarted 04 - 2005-05-26" to create ser.cfg ( for RTPProxy ), i found some error in "/var/log/messages",

rtpproxy: Starting SER RTP Proxy server: rtpproxy rtpproxy: . rc: Starting rtpproxy: succeeded ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: Listening on ser: udp: 192.168.10.1 [192.168.10.1]:5060 ser: tcp: 192.168.10.1 [192.168.10.1]:5060 ser: Aliases: ser: ser: ser startup succeeded /usr/local/sbin/ser[2353]: Maxfwd module- initializing /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is initially 65535 /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is finally 131070 /usr/local/sbin/ser[2373]: INFO: fifo process starting: 2373 /usr/local/sbin/ser[2373]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2373]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... /usr/local/sbin/ser[2375]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2380]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2381]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2382]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2377]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2383]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2389]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2353]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2388]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2387]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2379]: rtpp_test: RTP proxy found, support for it enabled

I tried to test the ser in some case : ( using Windows Messenger 5.1 and released all port for ser )

1. "User A ( outside with NAT ) call User B ( same network with ser )"

• User A can't call User B.

2. "User B ( same network with ser ) call User A ( outside with NAT )"

• User B can call User B but No Voice and auto hangup.

3. "User A ( outside with NAT ) call User C ( outside with NAT )"

• User A can't call User C.

I found some information in MySQL ( Database : ser , Table : location )

username contact received user_a sip:192.168.1.1:7700 sip:234.234.234.234:1568 ( public ip ) user_b sip:192.168.10.11:7446 sip:192.168.10.1.3112 ( private ip ) user_c sip:192.168.2.1:15647 sip:123.123.123.123:21144 ( public ip )

I tried many times, but the problem is same !

Please help !

tks a lot ! Freeman

相片電郵測試版一個郵件就可以傳送過百張相片！

I tried to change the config in ser.cfg , listen=192.168.10.1 ( private ip ) to listen=234.234.234.234 ( public ip ), but i get some error in "/var/log/messages" as below :

rtpproxy: Starting SER RTP Proxy server: rtpproxy rtpproxy: . rc: Starting rtpproxy: succeeded xfs: xfs startup succeeded xfs: ignoring font path element /usr/X11R6/lib/X11/fonts/cyrillic (unreadable) ser: WARNING: fix_socket_list: could not rev. resolve 234.234.234.234 ser: WARNING: fix_socket_list: could not rev. resolve 234.234.234.234 ser: Listening on ser: udp: 234.234.234.234 [234.234.234.234]:5060 ser: tcp: 234.234.234.234 [234.234.234.234]:5060 ser: Aliases: ser: Jun 30 15:41:03 localhost ser: ser startup succeeded Jun 30 15:41:03 localhost /usr/local/sbin/ser[2356]: Maxfwd module- initializing Jun 30 15:41:05 localhost /usr/local/sbin/ser[2356]: INFO: udp_init: SO_RCVBUF is initially 65535 Jun 30 15:41:05 localhost /usr/local/sbin/ser[2356]: INFO: udp_init: SO_RCVBUF is finally 131070 Jun 30 15:41:05 localhost /usr/local/sbin/ser[2356]: ERROR: udp_init: bind(5, 0x80fd674, 16) on 234.234.234.234: Cannot assign requested address

tks a lot ! Freeman

Zeus Ng zeus.ng@isquare.com.au 說： Are you running SER in the private address space (10.x, 172.x or 192.168.x)? That does not run well unless you know how to use record_route_preset() and advertised_address. I recommend you move your SER to public address space.

-----Original Message----- From: serusers-bounces@lists.iptel.org On Behalf Of Freeman Sent: Thursday, 30 June 2005 12:49 PM To: serusers@lists.iptel.org

Hi,

I tried to follow the manual "GettingStarted 04 - 2005-05-26" to create ser.cfg ( for RTPProxy ), i found some error in "/var/log/messages",

rtpproxy: Starting SER RTP Proxy server: rtpproxy rtpproxy: . rc: Starting rtpproxy: succeeded ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: Listening on ser: udp: 192.168.10.1 [192.168.10.1]:5060 ser: tcp: 192.168.10.1 [192.168.10.1]:5060 ser: Aliases: ser: ser: ser startup succeeded /usr/local/sbin/ser[2353]: Maxfwd module- initializing /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is initially 65535 /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is finally 131070 /usr/local/sbin/ser[2373]: INFO: fifo process starting: 2373 /usr/local/sbin/ser[2373]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2373]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... /usr/local/sbin/ser[2375]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2380]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2381]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2382]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2377]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2383]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2389]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2353]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2388]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2387]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2379]: rtpp_test: RTP proxy found, support for it enabled

I tried to test the ser in some case : ( using Windows Messenger 5.1 and released all port for ser )

1. "User A ( outside with NAT ) call User B ( same network with ser )"

• User A can't call User B.

2. "User B ( same network with ser ) call User A ( outside with NAT )"

• User B can call User B but No Voice and auto hangup.

3. "User A ( outside with NAT ) call User C ( outside with NAT )"

• User A can't call User C.

I found some information in MySQL ( Database : ser , Table : location )

username contact received user_a sip:192.168.1.1:7700 sip:234.234.234.234:1568 ( public ip ) user_b sip:192.168.10.11:7446 sip:192.168.10.1.3112 ( private ip ) user_c sip:192.168.2.1:15647 sip:123.123.123.123:21144 ( public ip )

I tried many times, but the problem is same !

Please help !

tks a lot ! Freeman

有即時通知，收艂

Greger,

Sorry ! Where i can find the rtpproxy patch ????

tks a lot ! Freeman

"Greger V. Teigre" greger@teigre.com 說： To add to Zeus' comment: rtpproxy *cannot* run on a private IP without a patch I posted a while back. Search the archives (warning: the patch is outdated and must now be manually applied). g-) ---- Original Message ---- From: Freeman To: serusers@lists.iptel.org Sent: Thursday, June 30, 2005 04:48 AM Subject: [Serusers] [Seruser] GettingStarted04 - RTPProxy Setting Problem !

Hi,

  I tried to follow the manual "GettingStarted 04 - 2005-05-26"

to create ser.cfg ( for RTPProxy ), i found some error in "/var/log/messages",

rtpproxy: Starting SER RTP Proxy server: rtpproxy rtpproxy: . rc: Starting rtpproxy: succeeded ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: Listening on ser: udp: 192.168.10.1 [192.168.10.1]:5060 ser: tcp: 192.168.10.1 [192.168.10.1]:5060 ser: Aliases: ser: ser: ser startup succeeded /usr/local/sbin/ser[2353]: Maxfwd module- initializing /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is initially 65535 /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is finally 131070 /usr/local/sbin/ser[2373]: INFO: fifo process starting: 2373 /usr/local/sbin/ser[2373]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2373]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... /usr/local/sbin/ser[2375]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2380]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2381]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2382]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2377]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2383]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2389]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2353]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2388]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2387]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2379]: rtpp_test: RTP proxy found, support for it enabled

I tried to test the ser in some case : ( using Windows Messenger 5.1 and released all port for ser )

1. "User A ( outside with NAT ) call User B ( same network with ser )"

• User A can't call User B.

2. "User B ( same network with ser ) call User A ( outside with NAT )"

• User B can call User B but No Voice and auto hangup.

3. "User A ( outside with NAT ) call User C ( outside with NAT )"

• User A can't call User C.

I found some information in MySQL ( Database : ser , Table : location )

username contact received user_a sip:192.168.1.1:7700 sip:234.234.234.234:1568 ( public ip ) user_b sip:192.168.10.11:7446 sip:192.168.10.1.3112 ( private ip ) user_c sip:192.168.2.1:15647 sip:123.123.123.123:21144 ( public ip )

I tried many times, but the problem is same !

Please help !

tks a lot ! Freeman

---

想即時收到新 email 通知？ 下載 Yahoo! Messenger http://messenger.yahoo.com.hk

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

有即時通知，收艂

Greger,

How can i do with this patch ????

Can you tell me more detail ?

Can the patch help me to make ser behind NAT ?

tka a lot ! Freeman

"Greger V. Teigre" greger@teigre.com 說： It's attached. I would have posted it to bugs.sip-router.org, but rtpproxy is a separate module and should thus be created as a separate project in the bug tracking system... g-) ---- Original Message ---- From: Freeman To: Greger V. Teigre ; serusers@lists.iptel.org Sent: Thursday, June 30, 2005 09:54 AM Subject: 標題： Re: [Serusers] [Seruser] GettingStarted04 - RTPProxy Setting Problem !

Greger,

     Sorry ! Where i can find the rtpproxy patch ????

tks a lot ! Freeman

"Greger V. Teigre" greger@teigre.com 說： To add to Zeus' comment: rtpproxy *cannot* run on a private IP without a patch I posted a while back. Search the archives (warning: the patch is outdated and must now be manually applied). g-) ---- Original Message ---- From: Freeman To: serusers@lists.iptel.org Sent: Thursday, June 30, 2005 04:48 AM Subject: [Serusers] [Seruser] GettingStarted04 - RTPProxy Setting Problem !

...

Hi,

  I tried to follow the manual "GettingStarted 04 - 2005-05-26"

to create ser.cfg ( for RTPProxy ), i found some error in "/var/log/messages",

rtpproxy: Starting SER RTP Proxy server: rtpproxy rtpproxy: . rc: Starting rtpproxy: succeeded ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: WARNING: fix_socket_list: could not rev. resolve 192.168.10.1 ser: Listening on ser: udp: 192.168.10.1 [192.168.10.1]:5060 ser: tcp: 192.168.10.1 [192.168.10.1]:5060 ser: Aliases: ser: ser: ser startup succeeded /usr/local/sbin/ser[2353]: Maxfwd module- initializing /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is initially 65535 /usr/local/sbin/ser[2353]: INFO: udp_init: SO_RCVBUF is finally 131070 /usr/local/sbin/ser[2373]: INFO: fifo process starting: 2373 /usr/local/sbin/ser[2373]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2373]: SER: open_uac_fifo: fifo server up at /tmp/ser_fifo... /usr/local/sbin/ser[2375]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2380]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2381]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2382]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2377]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2383]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2389]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2353]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2388]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2387]: rtpp_test: RTP proxy found, support for it enabled /usr/local/sbin/ser[2379]: rtpp_test: RTP proxy found, support for it enabled

I tried to test the ser in some case : ( using Windows Messenger 5.1 and released all port for ser )

1. "User A ( outside with NAT ) call User B ( same network with ser

)" - User A can't call User B.

2. "User B ( same network with ser ) call User A ( outsid! e with

NAT )" - User B can call User B but No Voice and auto hangup.

3. "User A ( outside with NAT ) call User C ( outside with NAT )"

• User A can't call User C.

I found some information in MySQL ( Database : ser , Table : location )

username contact received user_a sip:192.168.1.1:7700 sip:234.234.234.234:1568 ( public ip ) user_b sip:192.168.10.11:7446 sip:192.168.10.1.3112 ( private ip ) user_c sip:192.168.2.1:15647 sip:123.123.123.123:21144 ( public ip )

I tried many times, but the problem is same !

Please help !

tks a lot ! Freeman

---

想即時收到新 email 通知？ 下載 Yahoo! Messenger http://messenger.yahoo.com.hk

---

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

有即時通知，收艂

*** ../rtpproxy_orig/main.c 2004-08-13 21:04:23.000000000 +0200 --- ./main.c 2004-11-17 18:30:32.000000000 +0100 *************** *** 215,220 **** --- 215,221 ---- static int umode = 0; /* UDP control mode */ static const char *cmd_sock = CMD_SOCK; static const char *pid_file = PID_FILE; + static char *public_ip = NULL;

/* * The first address is for external interface, the second one - for *************** *** 916,924 **** } if (lia[0] == NULL || ishostnull(lia[0])) len += sprintf(cp, "%d\n", lport); ! else ! len += sprintf(cp, "%d %s%s\n", lport, addr2char(lia[0]), ! (lia[0]->sa_family == AF_INET) ? "" : " 6"); doreply: if (umode == 0) { write(controlfd, buf, len); --- 917,931 ---- } if (lia[0] == NULL || ishostnull(lia[0])) len += sprintf(cp, "%d\n", lport); ! else { ! if(!public_ip) { ! len += sprintf(cp, "%d %s%s\n", lport, addr2char(lia[0]), ! (lia[0]->sa_family == AF_INET) ? "" : " 6"); ! } else { ! len += sprintf(cp, "%d %s%s\n", lport, public_ip, ! (lia[0]->sa_family == AF_INET) ? "" : " 6"); ! } ! } doreply: if (umode == 0) { write(controlfd, buf, len); *************** *** 999,1009 ****

dmode = 0;

! while ((ch = getopt(argc, argv, "vf2Rl:6:s:t:r:p:")) != -1) switch (ch) { case 'f': nodaemon = 1; break;

case 'l': bh[0] = optarg; --- 1006,1020 ----

dmode = 0;

! while ((ch = getopt(argc, argv, "vf2Rl:6:s:t:r:p:i:")) != -1) switch (ch) { case 'f': nodaemon = 1; break; + case 'i': + public_ip=(char*) malloc(strlen(optarg)+1); + strcpy(public_ip,optarg); + break;

case 'l': bh[0] = optarg; *************** *** 1014,1020 **** bmode = 1; } break; - case '6': bh6[0] = optarg; bh6[1] = strchr(bh6[0], '/'); --- 1025,1030 ----

芺笛戙菑穻