28 Feb
2005
28 Feb
'05
5:37 p.m.
I downloaded the 0.8.14 Debian packages and tried installing them.
I know that they work, since they worked fine on my other system, but
this one (which is almost identical, save for the NIC) doesn't work.
Here is what happens in the console:
# dpkg -i ser_0.8.14_i386.deb
Selecting previously deselected package ser.
(Reading database ... 10117 files and directories currently installed.)
Unpacking ser (from ser_0.8.14_i386.deb) ...
Setting up ser (0.8.14) ...
Restarting ser: ser
It just hangs there forever. I checked the end of /var/log/messages
but there are no messages from ser there.
I would try reinstalling Debian from scratch, but the server itself is
in another country, and I'm trying to install SER remotely over SSH.
I've tried rebooting which didn't help (although I didn't expect it would).
I searched on Google and the closest thing I could find was invalid
syntax in the ser.cfg script, but this is the initial package
install...
Please, please help me out.
--
Dana
28 Feb
28 Feb
9:22 p.m.
New subject: [Serusers] Re: Help - ser won't start while installing
On Mon, 28 Feb 2005 11:37:53 -0500, Dana Olson <rickaster(a)gmail.com> wrote:
I downloaded the 0.8.14 Debian packages and tried
installing them.
I know that they work, since they worked fine on my other system, but
this one (which is almost identical, save for the NIC) doesn't work.
Here is what happens in the console:
# dpkg -i ser_0.8.14_i386.deb
Selecting previously deselected package ser.
(Reading database ... 10117 files and directories currently installed.)
Unpacking ser (from ser_0.8.14_i386.deb) ...
Setting up ser (0.8.14) ...
Restarting ser: ser
It just hangs there forever. I checked the end of /var/log/messages
but there are no messages from ser there.
I would try reinstalling Debian from scratch, but the server itself is
in another country, and I'm trying to install SER remotely over SSH.
I've tried rebooting which didn't help (although I didn't expect it would).
I searched on Google and the closest thing I could find was invalid
syntax in the ser.cfg script, but this is the initial package
install...
Please, please help me out.
--
Dana
Okay, so if I hit CTRL+C to abort that, I get tossed back to the command prompt.
I checked the package lists against another system that is working
fine, and they are identical (aside from SER, since it won't fully
install).
If I try reinstalling SER, and this time if I try doing an strace dpkg
-i pkgname, I get this:
write(4, "#padding\n#padding\n#padding\n#padd"..., 4096) = 4096
write(4, "padding\n#padding\n#padding\n#paddi"..., 512) = 512
_llseek(4, 0, [0], SEEK_SET) = 0
write(4, "Package: ser\nStatus: install ok "..., 1198) = 1198
ftruncate(4, 1198) = 0
fsync(4) = 0
close(4) = 0
munmap(0x40014000, 4096) = 0
rename("/var/lib/dpkg/updates/tmp.i", "/var/lib/dpkg/updates/0009") =
0
open("/var/lib/dpkg/updates/tmp.i", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4
fcntl64(4, F_GETFD) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x40014000
write(4, "#padding\n#padding\n#padding\n#padd"..., 4096) = 4096
write(4, "padding\n#padding\n#padding\n#paddi"..., 512) = 512
_llseek(4, 0, [0], SEEK_SET) = 0
stat64("/var/lib/dpkg/info/ser.postinst", {st_mode=S_IFREG|0755,
st_size=2609, ...}) = 0
fork() = 882
rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {SIG_IGN}, {SIG_DFL}, 8) = 0
wait4(882, Restarting ser: ser
And that's where it sits.... For a long, long time. Probably forever,
if I let it go that long, but I figure an hour at a time is long
enough.
So, if I try to CTRL+C out of that and then just run strace ser, I get
this and then it hangs:
0) = 0x40026000
old_mmap(0x40027000, 7968, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40027000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\30\222"...,
1024) = 1024
fstat64(3, {st_mode=S_IFREG|0755, st_size=1153784, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x40029000
old_mmap(NULL, 1166560, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4002a000
mprotect(0x4013d000, 40160, PROT_NONE) = 0
old_mmap(0x4013d000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED, 3, 0x113000) = 0x4013d000
old_mmap(0x40143000, 15584, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40143000
close(3) = 0
munmap(0x40014000, 7662) = 0
brk(0) = 0x81d9878
brk(0x81d99f8) = 0x81d99f8
brk(0x81da000) = 0x81da000
open("/etc/ser/ser.cfg", O_RDONLY) = 3
open("/dev/random", O_RDONLY) = 4
read(4,
Does anyone know what's going on? Please help me...
--
Dana
1 Mar
1 Mar
4:06 p.m.
New subject: [Serusers] Re: Help - ser won't start while installing
On Mon, 28 Feb 2005 15:22:30 -0500, Dana Olson <rickaster(a)gmail.com> wrote:
On Mon, 28 Feb 2005 11:37:53 -0500, Dana Olson
<rickaster(a)gmail.com> wrote:
I removed SER, I took the SIP_DOMAIN variable out of /etc/profile, I
rebooted, and I tried to install again, and it STILL doesn't work.
ser:/home/dolson# dpkg -i ser_0.8.14_i386.deb ser-mysql-module_0.8.14_i386.deb
Selecting previously deselected package ser.
(Reading database ... 10433 files and directories currently installed.)
Unpacking ser (from ser_0.8.14_i386.deb) ...
Selecting previously deselected package ser-mysql-module.
Unpacking ser-mysql-module (from ser-mysql-module_0.8.14_i386.deb) ...
Setting up ser (0.8.14) ...
Restarting ser: ser
It just hangs there...
Does anyone even have any random ideas? I don't know what else to try,
I can't find any info on Google, can't find anything in the admin
guide, can't find anything anywhere. Is there a different SIP proxy
that I should be using? Please let me know. Thanks.
--
Dana
I downloaded the 0.8.14 Debian packages and tried
installing them.
I know that they work, since they worked fine on my other system, but
this one (which is almost identical, save for the NIC) doesn't work.
Here is what happens in the console:
# dpkg -i ser_0.8.14_i386.deb
Selecting previously deselected package ser.
(Reading database ... 10117 files and directories currently installed.)
Unpacking ser (from ser_0.8.14_i386.deb) ...
Setting up ser (0.8.14) ...
Restarting ser: ser
It just hangs there forever. I checked the end of /var/log/messages
but there are no messages from ser there.
I would try reinstalling Debian from scratch, but the server itself is
in another country, and I'm trying to install SER remotely over SSH.
I've tried rebooting which didn't help (although I didn't expect it would).
I searched on Google and the closest thing I could find was invalid
syntax in the ser.cfg script, but this is the initial package
install...
Please, please help me out.
--
Dana
Okay, so if I hit CTRL+C to abort that, I get tossed back to the command prompt.
I checked the package lists against another system that is working
fine, and they are identical (aside from SER, since it won't fully
install).
If I try reinstalling SER, and this time if I try doing an strace dpkg
-i pkgname, I get this:
write(4, "#padding\n#padding\n#padding\n#padd"..., 4096) = 4096
write(4, "padding\n#padding\n#padding\n#paddi"..., 512) = 512
_llseek(4, 0, [0], SEEK_SET) = 0
write(4, "Package: ser\nStatus: install ok "..., 1198) = 1198
ftruncate(4, 1198) = 0
fsync(4) = 0
close(4) = 0
munmap(0x40014000, 4096) = 0
rename("/var/lib/dpkg/updates/tmp.i", "/var/lib/dpkg/updates/0009") =
0
open("/var/lib/dpkg/updates/tmp.i", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4
fcntl64(4, F_GETFD) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x40014000
write(4, "#padding\n#padding\n#padding\n#padd"..., 4096) = 4096
write(4, "padding\n#padding\n#padding\n#paddi"..., 512) = 512
_llseek(4, 0, [0], SEEK_SET) = 0
stat64("/var/lib/dpkg/info/ser.postinst", {st_mode=S_IFREG|0755,
st_size=2609, ...}) = 0
fork() = 882
rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {SIG_IGN}, {SIG_DFL}, 8) = 0
wait4(882, Restarting ser: ser
And that's where it sits.... For a long, long time. Probably forever,
if I let it go that long, but I figure an hour at a time is long
enough.
So, if I try to CTRL+C out of that and then just run strace ser, I get
this and then it hangs:
0) = 0x40026000
old_mmap(0x40027000, 7968, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40027000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\30\222"...,
1024) = 1024
fstat64(3, {st_mode=S_IFREG|0755, st_size=1153784, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x40029000
old_mmap(NULL, 1166560, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4002a000
mprotect(0x4013d000, 40160, PROT_NONE) = 0
old_mmap(0x4013d000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED, 3, 0x113000) = 0x4013d000
old_mmap(0x40143000, 15584, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40143000
close(3) = 0
munmap(0x40014000, 7662) = 0
brk(0) = 0x81d9878
brk(0x81d99f8) = 0x81d99f8
brk(0x81da000) = 0x81da000
open("/etc/ser/ser.cfg", O_RDONLY) = 3
open("/dev/random", O_RDONLY) = 4
read(4,
Does anyone know what's going on? Please help me...
--
Dana
9:40 p.m.
New subject: [Serusers] Re: Help - ser won't start while installing
On Tue, 1 Mar 2005 10:06:57 -0500, Dana Olson <rickaster(a)gmail.com> wrote:
On Mon, 28 Feb 2005 15:22:30 -0500, Dana Olson
<rickaster(a)gmail.com> wrote:
Okay, jpablo in the IRC channel helped me figure it out. Apparently my
/dev/random stopped working... Which is very strange, but a temporary
workaround is to remove it, then make a symlink to /dev/urandom.
Does anyone have any idea why /dev/random would stop working, and how
can I get it back?
--
Dana
On Mon, 28 Feb 2005 11:37:53 -0500, Dana Olson
<rickaster(a)gmail.com> wrote:
I removed SER, I took the SIP_DOMAIN variable out of /etc/profile, I
rebooted, and I tried to install again, and it STILL doesn't work.
ser:/home/dolson# dpkg -i ser_0.8.14_i386.deb ser-mysql-module_0.8.14_i386.deb
Selecting previously deselected package ser.
(Reading database ... 10433 files and directories currently installed.)
Unpacking ser (from ser_0.8.14_i386.deb) ...
Selecting previously deselected package ser-mysql-module.
Unpacking ser-mysql-module (from ser-mysql-module_0.8.14_i386.deb) ...
Setting up ser (0.8.14) ...
Restarting ser: ser
It just hangs there...
Does anyone even have any random ideas? I don't know what else to try,
I can't find any info on Google, can't find anything in the admin
guide, can't find anything anywhere. Is there a different SIP proxy
that I should be using? Please let me know. Thanks.
--
Dana I downloaded the 0.8.14 Debian packages and tried
installing them.
I know that they work, since they worked fine on my other system, but
this one (which is almost identical, save for the NIC) doesn't work.
Here is what happens in the console:
# dpkg -i ser_0.8.14_i386.deb
Selecting previously deselected package ser.
(Reading database ... 10117 files and directories currently installed.)
Unpacking ser (from ser_0.8.14_i386.deb) ...
Setting up ser (0.8.14) ...
Restarting ser: ser
It just hangs there forever. I checked the end of /var/log/messages
but there are no messages from ser there.
I would try reinstalling Debian from scratch, but the server itself is
in another country, and I'm trying to install SER remotely over SSH.
I've tried rebooting which didn't help (although I didn't expect it would).
I searched on Google and the closest thing I could find was invalid
syntax in the ser.cfg script, but this is the initial package
install...
Please, please help me out.
--
Dana
Okay, so if I hit CTRL+C to abort that, I get tossed back to the command prompt.
I checked the package lists against another system that is working
fine, and they are identical (aside from SER, since it won't fully
install).
If I try reinstalling SER, and this time if I try doing an strace dpkg
-i pkgname, I get this:
write(4, "#padding\n#padding\n#padding\n#padd"..., 4096) = 4096
write(4, "padding\n#padding\n#padding\n#paddi"..., 512) = 512
_llseek(4, 0, [0], SEEK_SET) = 0
write(4, "Package: ser\nStatus: install ok "..., 1198) = 1198
ftruncate(4, 1198) = 0
fsync(4) = 0
close(4) = 0
munmap(0x40014000, 4096) = 0
rename("/var/lib/dpkg/updates/tmp.i", "/var/lib/dpkg/updates/0009") =
0
open("/var/lib/dpkg/updates/tmp.i", O_WRONLY|O_CREAT|O_TRUNC, 0666) = 4
fcntl64(4, F_GETFD) = 0
fcntl64(4, F_SETFD, FD_CLOEXEC) = 0
fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x40014000
write(4, "#padding\n#padding\n#padding\n#padd"..., 4096) = 4096
write(4, "padding\n#padding\n#padding\n#paddi"..., 512) = 512
_llseek(4, 0, [0], SEEK_SET) = 0
stat64("/var/lib/dpkg/info/ser.postinst", {st_mode=S_IFREG|0755,
st_size=2609, ...}) = 0
fork() = 882
rt_sigaction(SIGQUIT, {SIG_IGN}, {SIG_DFL}, 8) = 0
rt_sigaction(SIGINT, {SIG_IGN}, {SIG_DFL}, 8) = 0
wait4(882, Restarting ser: ser
And that's where it sits.... For a long, long time. Probably forever,
if I let it go that long, but I figure an hour at a time is long
enough.
So, if I try to CTRL+C out of that and then just run strace ser, I get
this and then it hangs:
0) = 0x40026000
old_mmap(0x40027000, 7968, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40027000
close(3) = 0
open("/lib/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\30\222"...,
1024) = 1024
fstat64(3, {st_mode=S_IFREG|0755, st_size=1153784, ...}) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0x40029000
old_mmap(NULL, 1166560, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) = 0x4002a000
mprotect(0x4013d000, 40160, PROT_NONE) = 0
old_mmap(0x4013d000, 24576, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED, 3, 0x113000) = 0x4013d000
old_mmap(0x40143000, 15584, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40143000
close(3) = 0
munmap(0x40014000, 7662) = 0
brk(0) = 0x81d9878
brk(0x81d99f8) = 0x81d99f8
brk(0x81da000) = 0x81da000
open("/etc/ser/ser.cfg", O_RDONLY) = 3
open("/dev/random", O_RDONLY) = 4
read(4,
Does anyone know what's going on? Please help me...
--
Dana
7024
days inactive
7025
days old
3 comments
1 participants
participants (1)
-
Dana Olson