13 Apr
2010
13 Apr
'10
11:16 a.m.
Hi,
I have a problem to routing with kamailio. When I restart kamailio I
have this error message :
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3: syntax error
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3:
ERROR: bad config file (2 errors)
here is my line 640 :
if (uri=~"sip:9[0-9][0-9]@.*") { //line 640
log(1, "Matched Cisco Call Manager");
route(4);
};
Can you help me please
thank you
13 Apr
13 Apr
11:27 a.m.
2010/4/13 alexis heron <alexis.heron(a)crihan.fr>fr>:
Hi,
I have a problem to routing with kamailio. When I restart kamailio I have
this error message :
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3: syntax error
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3:
ERROR: bad config file (2 errors)
here is my line 640 :
if (uri=~"sip:9[0-9][0-9]@.*") { //line 640
log(1, "Matched Cisco Call Manager");
route(4);
};
As a suggestion, if you are interested in matching just the RURI
username part then I strongly recommend you doing so as follows:
if ( $rU =~ "^9[0-9][0-9]$" ) {
log(1, "Matched Cisco Call Manager");
route(4);
}
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
11:35 a.m.
Iñaki Baz Castillo wrote:
2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
Hi,
I have a problem to routing with kamailio. When I restart kamailio I have
this error message :
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3: syntax error
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3:
ERROR: bad config file (2 errors)
here is my line 640 :
if (uri=~"sip:9[0-9][0-9]@.*") { //line 640
log(1, "Matched Cisco Call Manager");
route(4);
};
As a suggestion, if you are interested in matching just the RURI
username part then I strongly recommend you doing so as follows:
if ( $rU =~ "^9[0-9][0-9]$" ) {
log(1, "Matched Cisco Call Manager");
route(4);
}
I have always the same error
11:45 a.m.
2010/4/13 alexis heron <alexis.heron(a)crihan.fr>fr>:
> As a suggestion, if you are interested in matching
just the RURI
> username part then I strongly recommend you doing so as follows:
>
> if ( $rU =~ "^9[0-9][0-9]$" ) {
> log(1, "Matched Cisco Call Manager");
> route(4);
> }
>
>
> I have always the same error
Also using my suggestion?
Try removing the "log" line.
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
11:49 a.m.
Iñaki Baz Castillo wrote:
2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
yes also usingg your suggestion and same in try removing the "log" line
In fact, the error is just before the "if" but before "if" it's
empty
> As a suggestion, if you are interested in
matching just the RURI
> username part then I strongly recommend you doing so as follows:
>
> if ( $rU =~ "^9[0-9][0-9]$" ) {
> log(1, "Matched Cisco Call Manager");
> route(4);
> }
>
>
> I have always the same error
>
Also using my suggestion?
Try removing the "log" line.
11:55 a.m.
On 4/13/10 11:49 AM, alexis heron wrote:
Iñaki Baz Castillo wrote:
the error is somewhere above. Maybe you haven't closed some open
pharentesis, quotes, etc ... the 'if' you pointed is ok. you have to
provide more of your config to be able to spot something.
Try to put a xlog (or other action) before the 'if' just to see if the
error changes the line.
Cheers,
Daniel
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
yes also usingg your suggestion and same in try removing the "log" line
In fact, the error is just before the "if" but before "if" it's
empty > As a suggestion, if you are interested in
matching just the RURI
> username part then I strongly recommend you doing so as follows:
>
> if ( $rU =~ "^9[0-9][0-9]$" ) {
> log(1, "Matched Cisco Call Manager");
> route(4);
> }
>
>
> I have always the same error
Also using my suggestion?
Try removing the "log" line.
11:59 a.m.
Daniel-Constantin Mierla wrote:
On 4/13/10 11:49 AM, alexis heron wrote:
always the same error
Iñaki Baz Castillo wrote:
the error is somewhere above. Maybe you haven't closed some open
pharentesis, quotes, etc ... the 'if' you pointed is ok. you have to
provide more of your config to be able to spot something.
Try to put a xlog (or other action) before the 'if' just to see if the
error changes the line.
Cheers,
Daniel 2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
yes also usingg your suggestion and same in try removing the "log" line
In fact, the error is just before the "if" but before "if" it's
empty > As a suggestion, if you are interested in
matching just the RURI
> username part then I strongly recommend you doing so as follows:
>
> if ( $rU =~ "^9[0-9][0-9]$" ) {
> log(1, "Matched Cisco Call Manager");
> route(4);
> }
>
>
> I have always the same error
Also using my suggestion?
Try removing the "log" line.
12:04 p.m.
On 4/13/10 11:59 AM, alexis heron wrote:
Daniel-Constantin Mierla wrote:
comment from the actions above until you spot it. if you don't provide
your config, cannot help here.
Daniel
--
Daniel-Constantin Mierla * http://www.asipto.com/ *
http://twitter.com/miconda *
http://www.linkedin.com/in/danielconstantinmierla
On 4/13/10 11:49 AM, alexis heron wrote:
always the same error Iñaki Baz Castillo wrote:
the error is somewhere above. Maybe you haven't closed some open
pharentesis, quotes, etc ... the 'if' you pointed is ok. you have to
provide more of your config to be able to spot something.
Try to put a xlog (or other action) before the 'if' just to see if
the error changes the line.
Cheers,
Daniel 2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
>> As a suggestion, if you are interested in matching just the RURI
>> username part then I strongly recommend you doing so as follows:
>>
>> if ( $rU =~ "^9[0-9][0-9]$" ) {
>> log(1, "Matched Cisco Call Manager");
>> route(4);
>> }
>>
>>
>> I have always the same error
Also using my suggestion?
Try removing the "log" line.
yes also usingg your suggestion and same in try removing the "log" line
In fact, the error is just before the "if" but before "if" it's
empty
2:57 p.m.
Daniel-Constantin Mierla wrote:
On 4/13/10 11:59 AM, alexis heron wrote:
here is my config file :
#!define WITH_MYSQL
#***!define WITH_AUTH
#!define WITH_USRLOCDB
#
#
# *** To run in debug mode:
# - define WITH_DEBUG
#
# *** To enable mysql:
# - define WITH_MYSQL
#
# *** To enable authentication execute:
# - enable mysql
# - define WITH_AUTH
# - add users using 'kamctl'
#
# *** To enable persistent user location execute:
# - enable mysql
# - define WITH_USRLOCDB
#
# *** To enable presence server execute:
# - enable mysql
# - define WITH_PRESENCE
#
# *** To enable nat traversal execute:
# - define WITH_NAT
# - install RTPProxy: http://www.rtpproxy.org
# - start RTPProxy:
# rtpproxy -l _your_public_ip_ -s udp:localhost:7722
#
# *** To enable PSTN gateway routing execute:
# - define WITH_PSTN
# - set the value of pstn.gw_ip
# - check route[PSTN] for regexp routing condition
#
# *** To enhance accounting execute:
# - enable mysql
# - define WITH_ACCDB
# - add following columns to database
#!ifdef ACCDB_COMMENT
ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL
DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL
DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL
DEFAULT '';
ALTER TABLE missed_call ADD COLUMN dst_user VARCHAR(64) NOT NULL
DEFAULT '';
ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL
DEFAULT '';
#!endif
####### Global Parameters #########
#!ifdef WITH_DEBUG
debug=4
log_stderror=yes
#!else
debug=2
log_stderror=no
#!endif
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
fork=yes
children=4
/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes
/* uncomment the next line to disable the auto discovery of local aliases
based on revers DNS on IPs (default on) */
#auto_aliases=no
port=5060
/* uncomment and configure the following line if you want Kamailio to
bind on a specific interface/port/proto (default bind on all
available) */
listen=udp:195.221.29.144
alias= kamailio.crihan.fr
####### Custom Parameters #########
# These parameters can be modified runtime via RPC interface
# - see the documentation of 'cfg_rpc' module.
#
# Format: group.id = value 'desc' description
# Access: $sel(cfg_get.group.id) or @cfg_get.group.id
#
#!ifdef WITH_PSTN
# PSTN GW Routing
#
# - pstn.gw_ip: valid IP or hostname as string value, example:
# pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address"
#
# - by default is empty to avoid misrouting
pstn.gw_ip = "" desc "PSTN GW Address"
#!endif
####### Modules Section ########
#set module path
mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/"
/* uncomment next line for MySQL DB support */
#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif
####module siremis####
loadmodule "mi_datagram.so"
#####################
loadmodule "mi_fifo.so"
loadmodule "kex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "uri_db.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "mi_rpc.so"
loadmodule "acc.so"
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!endif
/* uncomment next line for aliases support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
NOTE: a DB (like db_mysql) module must be also loaded
NOTE: be sure and enable multi-domain support in all used modules
(see "multi-module params" section ) */
#loadmodule "domain.so"
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif
#!ifdef WITH_NAT
loadmodule "nathelper.so"
#!endif
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
#################module siremis##############
#------mi_datagram.so-------
modparam("mi_datagram","socket_name","udp:127.0.0.1:8033")
#############################################
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- rr params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "" )
# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
/* enhanced DB accounting */
#!ifdef WITH_ACCDB
modparam("acc", "db_flag", 1)
modparam("acc", "db_missed_flag", 2)
modparam("acc", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("acc", "db_extra",
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
#!endif
# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "db_url",
"mysql://openser:kamailio@localhost/TEST")
#!endif
# ----- auth_db params -----
/* enable the DB based authentication */
#!ifdef WITH_AUTH
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("auth_db", "load_credentials", "")
#!endif
# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
aliases */
#modparam("alias_db", "db_url",
# "mysql://openser:openserrw@localhost/openser")
# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
support */
#modparam("domain", "db_url",
# "mysql://openser:openserrw@localhost/openser")
#modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
in the modules (dafault off) */
#modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)
# ----- presence params -----
/* enable presence server support */
#!ifdef WITH_PRESENCE
modparam("presence|presence_xml", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("presence_xml", "force_active", 1)
modparam("presence", "server_address",
"sip:195.221.29.144:5060")
#!endif
# ----- nathelper -----
#!ifdef WITH_NAT
modparam("nathelper", "rtpproxy_sock",
"udp:127.0.0.1:7722")
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", 7)
modparam("nathelper", "sipping_from",
"sip:pinger@kamailio.org")
modparam("registrar|nathelper", "received_avp",
"$avp(i:80)")
modparam("usrloc", "nat_bflag", 6)
#!endif
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if(!sanity_check("1511", "7"))
{
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
# NAT detection
route(NAT);
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
}
route(RELAY);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(PRESENCE);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK
after a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and
discard.\n");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authentication
route(AUTH);
# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if (!uri==myself)
/* replace with following line if multi-domain support is used */
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
route(RELAY);
}
# requests for my domain
if( is_method("PUBLISH|SUBSCRIBE"))
route(PRESENCE);
if (is_method("REGISTER"))
{
if(isflagset(5))
{
setbflag("6");
# uncomment next line to do SIP NAT pinging
## setbflag("7");
}
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==$null) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
route(PSTN);
# apply DB based aliases (uncomment to enable)
##alias_db_lookup("dbaliases");
if (!lookup("location")) {
switch ($rc) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(RELAY);
}
route[RELAY] {
#!ifdef WITH_NAT
if (check_route_param("nat=yes")) {
setbflag("6");
}
if (isflagset(5) || isbflagset("6")) {
route(RTPPROXY);
}
#!endif
/* example how to enable some additional event routes */
if (is_method("INVITE")) {
#t_on_branch("BRANCH_ONE");
t_on_reply("REPLY_ONE");
t_on_failure("FAIL_ONE");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Presence server route
route[PRESENCE]
{
#!ifdef WITH_PRESENCE
if (!t_newtran())
{
sl_reply_error();
exit;
};
if(is_method("PUBLISH"))
{
handle_publish();
t_release();
}
else
if( is_method("SUBSCRIBE"))
{
handle_subscribe();
t_release();
}
exit;
#!endif
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==$null)
{
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Authentication route
route[AUTH] {
#!ifdef WITH_AUTH
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
if (!www_authorize(" ", "subscriber"))
{
www_challenge(" ", "0");
exit;
}
if ($au!=$tU)
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
# authenticate if from local subscriber (uncomment to enable auth)
if (from_uri==myself)
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (is_method("PUBLISH"))
{
if ($au!=$tU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
if ($au!=$fU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
}
consume_credentials();
# caller authenticated
}
}
#!endif
return;
}
# Caller NAT detection route
route[NAT]{
#!ifdef WITH_NAT
force_rport();
if (nat_uac_test("19")) {
if (method=="REGISTER") {
fix_nated_register();
} else {
fix_nated_contact();
}
setflag(5);
}
#!endif
return;
}
# RTPProxy control
route[RTPPROXY] {
#!ifdef WITH_NAT
if (is_method("BYE")) {
unforce_rtp_proxy();
} else if (is_method("INVITE")){
force_rtp_proxy();
}
if (!has_totag()) add_rr_param(";nat=yes");
#!endif
return;
}
# PSTN GW routing
route[PSTN] {
#!ifdef WITH_PSTN
# check if PSTN GW IP is defined
if (strempty($sel(cfg_get.pstn.gw_ip))) {
xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n");
return;
}
# route to PSTN dialed numbers starting with '+' or '00'
# (international format)
# - update the condition to match your dialing rules for PSTN routing
if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$"))
return;
# only local users allowed to call
if(from_uri!=myself) {
sl_send_reply("403", "Not Allowed");
exit;
}
$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
route(RELAY);
exit;
#!endif
return;
}
# Sample branch router
branch_route[BRANCH_ONE] {
xdbg("new branch at $ru\n");
}
# Sample onreply route
onreply_route[REPLY_ONE] {
xdbg("incoming reply\n");
#!ifdef WITH_NAT
if ((isflagset(5) || isbflagset("6")) &&
status=~"(183)|(2[0-9][0-9])") {
force_rtp_proxy();
}
if (isbflagset("6")) {
fix_nated_contact();
}
#!endif
}
# Sample failure route
failure_route[FAIL_ONE] {
#!ifdef WITH_NAT
if (is_method("INVITE")
&& (isbflagset("6") || isflagset(5))) {
unforce_rtp_proxy();
}
#!endif
if (t_is_canceled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
##########Correspondance avec numéro de téléphone##########
if (uri=~"9[0-9][0-9]@.*") {
log(1, "Matched Cisco Call Manager");
route(4);
};
# if (uri=="sip:941@ccm-ipv6.crihan.fr") {
# forward(195.221.29.145, 5060);
# }
#-------------------------------------------------#
# ROUTAGE MAQUETTE 1 #
#-------------------------------------------------#
##########Routage vers Cisco Call Manager##########
route[4] {
log(1, "In route[4]");
rewritehostport("ccm-ipv6.crihan.fr:5060");
append_hf("P-hint: Forwarded to CCM\r\n");
xlog("L_INFO", "$rm from $fu to $tu");
t_on_failure("2");
if (!t_relay()) {
sl_reply_error();
};
exit;
}
Daniel-Constantin Mierla wrote:
comment from the actions above until you spot it. if you don't provide
your config, cannot help here.
Daniel
On 4/13/10 11:49 AM, alexis heron wrote:
always the same error Iñaki Baz Castillo wrote:
> 2010/4/13 alexis heron <alexis.heron(a)crihan.fr>fr>:
>>> As a suggestion, if you are interested in matching just the RURI
>>> username part then I strongly recommend you doing so as follows:
>>>
>>> if ( $rU =~ "^9[0-9][0-9]$" ) {
>>> log(1, "Matched Cisco Call Manager");
>>> route(4);
>>> }
>>>
>>>
>>> I have always the same error
>
> Also using my suggestion?
> Try removing the "log" line.
>
>
>
yes also usingg your suggestion and same in try removing the "log"
line
In fact, the error is just before the "if" but before "if" it's
empty
the error is somewhere above. Maybe you haven't closed some open
pharentesis, quotes, etc ... the 'if' you pointed is ok. you have to
provide more of your config to be able to spot something.
Try to put a xlog (or other action) before the 'if' just to see if
the error changes the line.
Cheers,
Daniel 
3:04 p.m.
alexis heron wrote:
# Sample failure route
failure_route[FAIL_ONE] {
#!ifdef WITH_NAT
if (is_method("INVITE")
&& (isbflagset("6") || isflagset(5))) {
unforce_rtp_proxy();
}
#!endif
if (t_is_canceled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
##########Correspondance avec numéro de téléphone##########
if (uri=~"9[0-9][0-9]@.*") {
log(1, "Matched Cisco Call Manager");
route(4);
Hello
The if(uri=~...) check is outside of any route[], failure_route[]
declaration. because of the "}" closed paranthesys 5 lines above which
closes failure_route[FAIL_ONE]
So my editor says...
Marius
3:18 p.m.
marius zbihlei wrote:
alexis heron wrote:
In fact, I woul like to mount a TrunkSIP to call numbers 9xx, that's how
we do??
thank you
# Sample failure route
failure_route[FAIL_ONE] {
#!ifdef WITH_NAT
if (is_method("INVITE")
&& (isbflagset("6") || isflagset(5))) {
unforce_rtp_proxy();
}
#!endif
if (t_is_canceled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
##########Correspondance avec numéro de téléphone##########
if (uri=~"9[0-9][0-9]@.*") {
log(1, "Matched Cisco Call Manager");
route(4);
Hello
The if(uri=~...) check is outside of any route[], failure_route[]
declaration. because of the "}" closed paranthesys 5 lines above
which closes failure_route[FAIL_ONE]
So my editor says...
Marius
2:59 p.m.
Daniel-Constantin Mierla wrote:
On 4/13/10 11:59 AM, alexis heron wrote:
please help me
thank you
Daniel-Constantin Mierla wrote:
comment from the actions above until you spot it. if you don't provide
your config, cannot help here.
Daniel
On 4/13/10 11:49 AM, alexis heron wrote:
always the same error Iñaki Baz Castillo wrote:
> 2010/4/13 alexis heron <alexis.heron(a)crihan.fr>fr>:
>>> As a suggestion, if you are interested in matching just the RURI
>>> username part then I strongly recommend you doing so as follows:
>>>
>>> if ( $rU =~ "^9[0-9][0-9]$" ) {
>>> log(1, "Matched Cisco Call Manager");
>>> route(4);
>>> }
>>>
>>>
>>> I have always the same error
>
> Also using my suggestion?
> Try removing the "log" line.
>
>
>
yes also usingg your suggestion and same in try removing the "log"
line
In fact, the error is just before the "if" but before "if" it's
empty
the error is somewhere above. Maybe you haven't closed some open
pharentesis, quotes, etc ... the 'if' you pointed is ok. you have to
provide more of your config to be able to spot something.
Try to put a xlog (or other action) before the 'if' just to see if
the error changes the line.
Cheers,
Daniel 
3:04 p.m.
failure_route[FAIL_ONE] { is closed before your "if ( $rU =~ "^9[0- ....."
2010/4/13 alexis heron <alexis.heron(a)crihan.fr>
Daniel-Constantin Mierla wrote:
On 4/13/10 11:59 AM, alexis heron wrote:
please help me
thank you
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
Daniel-Constantin Mierla wrote:
comment from the actions above until you spot it. if you don't provide
your config, cannot help here.
Daniel
On 4/13/10 11:49 AM, alexis heron wrote:
> Iñaki Baz Castillo wrote:
>
>> 2010/4/13 alexis heron <alexis.heron(a)crihan.fr>fr>:
>>
>>> As a suggestion, if you are interested in matching just the RURI
>>>> username part then I strongly recommend you doing so as follows:
>>>>
>>>> if ( $rU =~ "^9[0-9][0-9]$" ) {
>>>> log(1, "Matched Cisco Call Manager");
>>>> route(4);
>>>> }
>>>>
>>>>
>>>> I have always the same error
>>>>
>>>
>> Also using my suggestion?
>> Try removing the "log" line.
>>
>>
>>
>>
> yes also usingg your suggestion and same in try removing the "log" line
>
> In fact, the error is just before the "if" but before "if"
it's empty
>
the error is somewhere above. Maybe you haven't closed some open
pharentesis, quotes, etc ... the 'if' you pointed is ok. you have to provide
more of your config to be able to spot something.
Try to put a xlog (or other action) before the 'if' just to see if the
error changes the line.
Cheers,
Daniel
always the same error
3:34 p.m.
Laszlo wrote:
failure_route[FAIL_ONE] { is closed before your
"if ( $rU =~ "^9[0- ....."
2010/4/13 alexis heron <alexis.heron(a)crihan.fr
<mailto:alexis.heron@crihan.fr>>
Daniel-Constantin Mierla wrote:
On 4/13/10 11:59 AM, alexis heron wrote:
Daniel-Constantin Mierla wrote:
On 4/13/10 11:49 AM, alexis heron wrote:
Iñaki Baz Castillo wrote:
2010/4/13 alexis heron <alexis.heron(a)crihan.fr
<mailto:alexis.heron@crihan.fr>>:
As a suggestion, if you are interested
in matching just the RURI
username part then I strongly
recommend you doing so as follows:
if ( $rU =~ "^9[0-9][0-9]$" ) {
log(1, "Matched Cisco Call
Manager");
route(4);
}
I have always the same error
Also using my suggestion?
Try removing the "log" line.
yes also usingg your suggestion and same in try
removing the "log" line
In fact, the error is just before the "if" but
before "if" it's empty
the error is somewhere above. Maybe you haven't closed
some open pharentesis, quotes, etc ... the 'if' you
pointed is ok. you have to provide more of your config
to be able to spot something.
Try to put a xlog (or other action) before the 'if'
just to see if the error changes the line.
Cheers,
Daniel
always the same error
comment from the actions above until you spot it. if you don't
provide your config, cannot help here.
Daniel
please help me
thank you
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing
list
sr-users(a)lists.sip-router.org <mailto:sr-users@lists.sip-router.org>
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
help me please,
how to make a SIPtrunk??
3:38 p.m.
2010/4/13 alexis heron <alexis.heron(a)crihan.fr>fr>:
help me please,
how to make a SIPtrunk??
Please, open a new thread for a new topic.
Anyhow, I recommend you reading the full documentation. There is not a
"magic" concept of a SIPtrunk.
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
3:38 p.m.
Iñaki Baz Castillo wrote:
2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
yes but with if(uri=~...) it's good, no??
help me please,
how to make a SIPtrunk??
Please, open a new thread for a new topic.
Anyhow, I recommend you reading the full documentation. There is not a
"magic" concept of a SIPtrunk.
3:57 p.m.
2010/4/13 alexis heron <alexis.heron(a)crihan.fr>fr>:
There you are checking if the Request URI matches something. If it's
all that you need to "build a SIPtrunk" then it's ok.
However, I recommended you to use "if ( $rU =~ )".
--
Iñaki Baz Castillo
<ibc(a)aliax.net>
Please, open a
new thread for a new topic.
Anyhow, I recommend you reading the full documentation. There is not a
"magic" concept of a SIPtrunk.
yes but with if(uri=~...) it's good, no??
4:04 p.m.
2010/4/13 Iñaki Baz Castillo <ibc(a)aliax.net>
2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
There you are checking if the Request URI matches something. If it's
all that you need to "build a SIPtrunk" then it's ok.
However, I recommended you to use "if ( $rU =~ )".
+ using route(NAME_GOES_HERE) ; instead of route(4);
Please,
open a new thread for a new topic.
Anyhow, I recommend you reading the full documentation. There is not a
"magic" concept of a SIPtrunk.
yes but with if(uri=~...) it's good, no?? 
4:04 p.m.
Hi Alexis ou alors, salut Alexis,
Je vais le faire en français, cela t'aidera peut-être.
Tu a la chance d'avoir les conseils de Daniel et d'Inaki, suis les, fait
ce qu'ils te disent de faire.
Le harcèlement sur une mailing-list te mèneras juste à ne plus avoir de
réponses.
Un bon conseil, va lire la documentation de Kamailio/ser/...
Ou alors, sois prêt à payer pour les services que tu demandes.
Sorry all for the french post.
bat,
Olivier
alexis heron a écrit :
Iñaki Baz Castillo wrote:
2010/4/13 alexis heron
<alexis.heron(a)crihan.fr>fr>:
yes but with if(uri=~...) it's good, no??
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users help me please,
how to make a SIPtrunk??
Please, open a new thread for a new topic.
Anyhow, I recommend you reading the full documentation. There is not a
"magic" concept of a SIPtrunk.
11:32 a.m.
alexis heron wrote:
Hi,
I have a problem to routing with kamailio. When I restart kamailio I
have this error message :
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3: syntax error
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3:
ERROR: bad config file (2 errors)
here is my line 640 :
if (uri=~"sip:9[0-9][0-9]@.*") { //line 640
log(1, "Matched Cisco Call Manager");
route(4);
};
Can you help me please
thank you
Hello,
Hope you added the "//line 640" comment afterward because Kamailio
doesn't support "//" type comments (the line comment is started with #,
multi-line comments are /* */).
What version of Kamailio are you using?
Marius
11:34 a.m.
marius zbihlei wrote:
alexis heron wrote:
my vesrion is 3.0.0
"//line 640" it's just for the forum
Hi,
I have a problem to routing with kamailio. When I restart kamailio I
have this error message :
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3: syntax error
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3:
ERROR: bad config file (2 errors)
here is my line 640 :
if (uri=~"sip:9[0-9][0-9]@.*") { //line 640
log(1, "Matched Cisco Call Manager");
route(4);
};
Can you help me please
thank you
Hello,
Hope you added the "//line 640" comment afterward because Kamailio
doesn't support "//" type comments (the line comment is started with
#, multi-line comments are /* */).
What version of Kamailio are you using?
Marius
14 Apr
14 Apr
3:30 p.m.
alexis heron wrote:
Hi,
I have a problem to routing with kamailio. When I restart kamailio I
have this error message :
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3: syntax error
0(710) : <core> [cfg.y:3328]: parse error in config file
/usr/local/etc/kamailio/kamailio.cfg, line 640, column 2-3:
ERROR: bad config file (2 errors)
here is my line 640 :
if (uri=~"sip:9[0-9][0-9]@.*") { //line 640
log(1, "Matched Cisco Call Manager");
route(4);
};
Can you help me please
thank you
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
thank you all for your help my SIPtrunk is mounted thanks to you. My
telephone routing is now operational.
thank you very much for your help
4:23 p.m.
On Wednesday 14 April 2010, alexis heron wrote:
thank you all for your help my SIPtrunk is mounted
thanks to you. My
telephone routing is now operational.
Hi Alexis,
good to know that it works now for you. :-) Every new beginning is difficult,
and for this projects the learning curve is even more steep..
Henning
5133
days inactive
5134
days old
22 comments
7 participants
participants (7)
-
alexis heron -
Daniel-Constantin Mierla -
Henning Westerholt -
hh174 -
Iñaki Baz Castillo -
Laszlo -
marius zbihlei