As far as i remember, kamailio support for xmpp interconnect is limited to component to server and server to server communication. However, you seem to need sip server acting as a xmpp client for login and send / receive messages to/from remote xmpp server. This may not be possible while using kamailio.

Perhaps you can use res_jabber module in asterisk which allows sip users to connect to remote xmpp server using asterisk as xmpp client.

See this link as a starting point for your research,

https://www.voip-info.org/asterisk-jabber/

BTW, you can also check with your xmpp service provider to see if they allow component to server or server to server interconnect (they usually do). If so, then you may use kamailio after all.

Hope this helps.

Thank you.

On Jun 19, 2019 at 3:47 PM, <sagar malam (mailto:sagarmalam@gmail.com)> wrote:

David,

It wont be good idea to use those modules. This is from Daniel from one of my emails in the list :

"SIP SIMPLE and XMPP presence specs are not one-to-one compatible in terms of architecture/specs. The xmpp module is able to translate some of the basic presence concepts from one to another, but not everything. The module is also a bit old, i haven't seen much activity around it to be able to assert to how level it can help.

Another approach that I saw in the past is to leverage some (REST) API between the SIP server (kamailio) and XMPP server (iirc, it was prosody) in order to genenrate presence events/messages in both sides. Kamailio has PUA modules that can get control commands via RPC (e.g., JSONRPC).

'

On Wed, Jun 19, 2019 at 10:09 AM David Villasmil <david.villasmil.work@gmail.com (mailto:david.villasmil.work@gmail.com)> wrote:

...

Hello guys,

I'm kind of confused as to what module exactly i need to user, let me explain:

I have a service for DIDs and SMS from s.ms (http://s.ms), i created a python script that connects to the service using xmpp to their jabber server with a user and a password, i.e.: xmpp_client.py MY-NUMBER@s.ms (mailto:MY-NUMBER@s.ms) MY-PASSWORD

What i do with that script is basically connect and wait to receive SMS, which i then insert in the proxy db (silo) and they get delivered by msilo.

I have several numbers and doing this for every number seems stupid, so i started looking for a better solution, since the end user will be receive the message via SIP MESSAGE on they sip client.

i came across kamailio/opensips' jabber and xmpp modules, but i'm not sure which (if any) to use, and even HOW to, or the actual architecture, since the documentation keeps talking about a local xmpp server?

I would REALLY appreciate some help here.

Thanks!

Regards,

David Villasmil email: david.villasmil.work@gmail.com (mailto:david.villasmil.work@gmail.com)

phone: +34669448337

Regards,

David Villasmil email: david.villasmil.work@gmail.com (mailto:david.villasmil.work@gmail.com)

phone: +34669448337

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org (mailto:sr-users@lists.kamailio.org) https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

--

Thanks,

Sagar

_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users