Hello,

Sorry for the late reply, I was a little busy by something else.

On 30/11/2010 22:24, Daniel-Constantin Mierla wrote:

Hello,

do you have

#!KAMAILIO

as first line in config file? This is required only for kamailio 3.0, next versions has the feature of dropping replies by default.

Yes I have #!KAMAILIO at the beginning of my kamailio.cfg.

Also, someone notided me that it could be a better idea to do a proper dialog establishment and try to end it after that, for example with dlg_bye("all"); So I think I will try to use something like :

#!ifdef WITH_MEDIA_PROXY

if (is_method("INVITE") && status == "200") { use_media_proxy(); if($rc < 0) { xlog("L_ERR", "invite reply error, use_media_proxy() failed with $rc \n"); if (dlg_get("$ci", "$ft", "$tt")) { xlog("L_DBG", "ending a new dialog\n"); dlg_bye("all"); } } } #!endif

Anyone has ever tried something like that ?

Thanks,

Cheers, Daniel

On 11/26/10 12:55 PM, nikita wrote:

...

Hello,

I'm using kamailio 3.0 with mediaproxy and I want to cancel calls if I have no mediaproxy relay connected to my mediaproxy dispatcher.

In my request route I'm checking if "use_media_proxy()" is returning me a positive result and it's working fine :

     use_media_proxy();
     if($rc<  0) {
              sl_send_reply("480","Temporarily Unavailable");
              exit;
     }

But I'm also want check in my onreply_route If I still have an active relay because I need to rewrite the sdp in the 200/OK reply. My problem is that I don't know how to end the transaction, I have tried :

     if (is_method("INVITE")&&  status == "200") {

#!ifdef WITH_MEDIA_PROXY use_media_proxy(); if($rc< 0) { xlog("L_ERR", "invite reply error $rc \n"); dlg_bye("all"); } #!endif }

and also :

     if (is_method("INVITE")&&  status == "200") {

#!ifdef WITH_MEDIA_PROXY use_media_proxy(); if($rc< 0) { xlog("L_ERR", "invite reply error $rc \n"); drop(); } #!endif }

In both case I'm seeing in my log file that use_media_proxy() returned me -1, but the reply is routed to the caller ...

Any idea on how I can cancel my call in the onreply_route ? Also, I don't know if it's a good thing to make a second call to "use_media_proxy" in the onreply_route, mediaproxy module couldn't reply me with a different relay address if I have multiple mediaproxy relay?

Regards,

On 03/12/2010 11:44, Daniel-Constantin Mierla wrote:

Hello,

On 12/2/10 4:15 PM, nikita wrote:

...

Hello,

Sorry for the late reply, I was a little busy by something else.

On 30/11/2010 22:24, Daniel-Constantin Mierla wrote:

...

Hello,

do you have

#!KAMAILIO

as first line in config file? This is required only for kamailio 3.0, next versions has the feature of dropping replies by default.

Yes I have #!KAMAILIO at the beginning of my kamailio.cfg.

is your config that you pasted located in a tm onreply route or the default onreply route? TM onreply route can drop only provisional replies (100-199).

Actually I was using the TM onreply route. Since I have switched to the default onreply_route I'm able to drop the 200OK, thank you for the clue.

...

Also, someone notided me that it could be a better idea to do a proper dialog establishment and try to end it after that, for example with dlg_bye("all"); So I think I will try to use something like :

#!ifdef WITH_MEDIA_PROXY

     if (is_method("INVITE")&&  status == "200") {
             use_media_proxy();
             if($rc<  0) {
                     xlog("L_ERR", "invite reply error,

use_media_proxy() failed with $rc \n"); if (dlg_get("$ci", "$ft", "$tt")) { xlog("L_DBG", "ending a new dialog\n"); dlg_bye("all"); } } } #!endif

Anyone has ever tried something like that ?

You will send the BYE before the 200ok is sent to caller, so it will get rejected most probably.

To avoid that issue, I have tried to use :

onreply_route { #!ifdef WITH_MEDIA_PROXY if (is_method("INVITE") && status == "200") { use_media_proxy(); if($rc) { xlog("L_ERR", "invite reply error $rc \n"); t_reply("480","Temporarily Unavailable"); drop(); } } #!endif }

And I came across something odd : The t_reply("480","Temporarily Unavailable"); send a 480 reply to the caller who reply ACK. But it also send CANCEL to the callee, which is too late because the callee have already sent his 200OK.

I'm trying to do the same thing with the dlg_bye("callee"); but I'm having a problem here too, the following route :

onreply_route { #!ifdef WITH_MEDIA_PROXY if (is_method("INVITE") && status == "200") { use_media_proxy(); if($rc < 0) { xlog("L_ERR", "invite reply error $rc \n"); if (dlg_get("$ci", "$tt", "$ft")) { xlog("L_ERR", "dlg found \n"); dlg_bye("callee"); }

} } #!endif }

generate me that error :

Dec 3 15:49:06 uServer-SIP /usr/local/sbin/kamailio[10084]: ERROR: dialog [dlg_req_within.c:105]: no contact available Dec 3 15:49:06 uServer-SIP /usr/local/sbin/kamailio[10084]: ERROR: dialog [dlg_req_within.c:246]: failed to create dlg_t

I think I have set correctly my dialog flag in my "route {}" route because if I comment the "setflag" line I have a dialog not found error instead.

For information, dlg_bye("caller") doesn't give me that error message and send a bye request to the caller (which like you have said, isn't what I'm looking for).

I digged a little in the source code of the contact module but I haven't found why my dlg_cell only contain the caller contact ... I will try to investigate further this weekend.

Thanks again for your time, Nikita

Cheers, Daniel

...

Thanks,

...

Cheers, Daniel

On 11/26/10 12:55 PM, nikita wrote:

...

Hello,

I'm using kamailio 3.0 with mediaproxy and I want to cancel calls if I have no mediaproxy relay connected to my mediaproxy dispatcher.

In my request route I'm checking if "use_media_proxy()" is returning me a positive result and it's working fine :

      use_media_proxy();
      if($rc<   0) {
               sl_send_reply("480","Temporarily Unavailable");
               exit;
      }

But I'm also want check in my onreply_route If I still have an active relay because I need to rewrite the sdp in the 200/OK reply. My problem is that I don't know how to end the transaction, I have tried :

      if (is_method("INVITE")&&   status == "200") {

#!ifdef WITH_MEDIA_PROXY use_media_proxy(); if($rc< 0) { xlog("L_ERR", "invite reply error $rc \n"); dlg_bye("all"); } #!endif }

and also :

      if (is_method("INVITE")&&   status == "200") {

#!ifdef WITH_MEDIA_PROXY use_media_proxy(); if($rc< 0) { xlog("L_ERR", "invite reply error $rc \n"); drop(); } #!endif }

In both case I'm seeing in my log file that use_media_proxy() returned me -1, but the reply is routed to the caller ...

Any idea on how I can cancel my call in the onreply_route ? Also, I don't know if it's a good thing to make a second call to "use_media_proxy" in the onreply_route, mediaproxy module couldn't reply me with a different relay address if I have multiple mediaproxy relay?

Regards,