8 Sep
2004
8 Sep
'04
3:01 a.m.
Hi,
In our ser.cfg, when an r-uri is first received, it goes through some number
to domain matching. For example, 8005551212(a)80.123.45.167 is mapped to
1212(a)companya.com. If the call is eventually forwarded to sems after failure
route, we want to revert it back to 1212(a)companya.coom, otherwise it would
be 1212@<phone-ip-address>. Is there a function to do it? The revert_uri()
would revert it back to the original 8005551212(a)80.123.45.167.
Thanks,
Richard
8 Sep
8 Sep
4:07 a.m.
Richard,
Unfortunately the prefix2domain() function is not available in failure route
block as of today. So, there is no easy way to do that right now.
I don't see there is major problem getting the function available in failure
route. You can request the implementer to make it available.
Zeus
-----Original Message-----
From: serusers-bounces(a)lists.iptel.org
[mailto:serusers-bounces@lists.iptel.org] On Behalf Of Richard
Sent: Wednesday, 8 September 2004 5:02 PM
To: serusers(a)lists.iptel.org
Subject: [Serusers] revert uri to its early state, but no the original
Hi,
In our ser.cfg, when an r-uri is first received, it goes
through some number to domain matching. For example,
8005551212(a)80.123.45.167 is mapped to 1212(a)companya.com. If
the call is eventually forwarded to sems after failure route,
we want to revert it back to 1212(a)companya.coom, otherwise it
would be 1212@<phone-ip-address>. Is there a function to do
it? The revert_uri() would revert it back to the original
8005551212(a)80.123.45.167.
Thanks,
Richard
4:24 a.m.
Hi Zeus,
The pdt module seems to be geared toward European numbering system. For
example, it always looks for terminator code which is not available in North
America. So currently I am using a manual checking in ser.cfg to change the
domain. I am thinking about developing a more flexible domain matching
module in the future.
I wonder if there is any function to save uri and retrieve it later.
Something like, save_uri(2) to save it to storage 2 and pop_uri(2) to get it
back.
Thanks,
Richard
-----Original Message-----
From: Zeus Ng [mailto:zeus.ng@isquare.com.au]
Sent: Tuesday, September 07, 2004 10:07 PM
To: 'Richard'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] revert uri to its early state, but no the original
Richard,
Unfortunately the prefix2domain() function is not available in failure
route
block as of today. So, there is no easy way to do that right now.
I don't see there is major problem getting the function available in
failure
route. You can request the implementer to make it available.
Zeus
> -----Original Message-----
> From: serusers-bounces(a)lists.iptel.org
> [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Richard
> Sent: Wednesday, 8 September 2004 5:02 PM
> To: serusers(a)lists.iptel.org
> Subject: [Serusers] revert uri to its early state, but no the original
>
>
> Hi,
>
> In our ser.cfg, when an r-uri is first received, it goes
> through some number to domain matching. For example,
> 8005551212(a)80.123.45.167 is mapped to 1212(a)companya.com. If
> the call is eventually forwarded to sems after failure route,
> we want to revert it back to 1212(a)companya.coom, otherwise it
> would be 1212@<phone-ip-address>. Is there a function to do
> it? The revert_uri() would revert it back to the original
> 8005551212(a)80.123.45.167.
>
> Thanks,
> Richard
>
>
>
4:22 a.m.
Richard writes:
I wonder if there is any function to save uri and
retrieve it later.
Something like, save_uri(2) to save it to storage 2 and pop_uri(2) to get it
back.
i don't think that there is yet such a function, but it could easily
implemented using the new avp functions.
-- juha
4:30 a.m.
Hello,
On 9/8/2004 10:24 AM, Richard wrote:
Hi Zeus,
The pdt module seems to be geared toward European numbering system. For
example, it always looks for terminator code which is not available in North
America.
it was actually designed to have a web interface (there is a subfolder
containing that in module directory) that automatically generates a code
for a new domain upon an anonymous request. To avoid overhead of code
overlapping checking and to have unlimited code range was chosen this
way. It is in module's developer plan to move to a human driven code
generation and no terminator -- no eta though.
So currently I am using a manual checking in ser.cfg
to change the
domain. I am thinking about developing a more flexible domain matching
module in the future.
I wonder if there is any function to save uri and retrieve it later.
Something like, save_uri(2) to save it to storage 2 and pop_uri(2) to get it
back.
There is an ongoing work to have such feature -- until then, call
revert_uri() and then the same piece of config that converted from
original uri to intermediary state.
Daniel
Thanks,
Richard
-----Original Message-----
From: Zeus Ng [mailto:zeus.ng@isquare.com.au]
Sent: Tuesday, September 07, 2004 10:07 PM
To: 'Richard'
Cc: serusers(a)lists.iptel.org
Subject: RE: [Serusers] revert uri to its early state, but no the original
Richard,
Unfortunately the prefix2domain() function is not available in failure
route
block as of today. So, there is no easy way to do that right now.
I don't see there is major problem getting the function available in
failure
route. You can request the implementer to make it available.
Zeus
>-----Original Message-----
>From: serusers-bounces(a)lists.iptel.org
>[mailto:serusers-bounces@lists.iptel.org] On Behalf Of Richard
>Sent: Wednesday, 8 September 2004 5:02 PM
>To: serusers(a)lists.iptel.org
>Subject: [Serusers] revert uri to its early state, but no the original
>
>
>Hi,
>
>In our ser.cfg, when an r-uri is first received, it goes
>through some number to domain matching. For example,
>8005551212(a)80.123.45.167 is mapped to 1212(a)companya.com. If
>the call is eventually forwarded to sems after failure route,
>we want to revert it back to 1212(a)companya.coom, otherwise it
>would be 1212@<phone-ip-address>. Is there a function to do
>it? The revert_uri() would revert it back to the original
>8005551212(a)80.123.45.167167.
>
>Thanks,
>Richard
>
>
>
>
>
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6:57 a.m.
New subject: [Serusers] revert uri to its early state, but no the original
Bogdan is currenlty working on it. It is about storing the URI in middle of
a rewrite chain to an AVP and resotring it from there from within failure_route.
-jiri
At 09:01 AM 9/8/2004, Richard wrote:
Hi,
In our ser.cfg, when an r-uri is first received, it goes through some number
to domain matching. For example, 8005551212(a)80.123.45.167 is mapped to
1212(a)companya.com. If the call is eventually forwarded to sems after failure
route, we want to revert it back to 1212(a)companya.coom, otherwise it would
be 1212@<phone-ip-address>. Is there a function to do it? The revert_uri()
would revert it back to the original 8005551212(a)80.123.45.167.
Thanks,
Richard
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
--
Jiri Kuthan http://iptel.org/~jiri/
7231
days inactive
7231
days old
5 comments
5 participants
participants (5)
-
Daniel-Constantin Mierla -
Jiri Kuthan -
Juha Heinanen -
Richard -
Zeus Ng