On Friday 04 January 2008, Michael Bradley Jr wrote:

Hi Henning,

I'm running openser on an openwrt (whiterussion 0.9) box and I'm quite new to openser. I did install openser and would like to quickly add a domain and some users that could digest auth on my box. I know RTFM but can you tell me the direction to go for this quick setup?

Hi,

look at http://www.openser.org/docs/modules/1.3.x/ for the modules docs. Basically you need to load a database driver of your choice and the db_auth module. Take a look at the docs for this module for the available functions for authentification, in the example config there are also some hints. I don't have experience with OpenSER on the openWRT, unfortunally, so i don't can give you more detailed hints about this special setup.

You need to specify your database type in the /etc/openser/openserctlrc file, and then you could use the openserdbctl tool to create a new database. After that you could add a new user with the openserctl tool, and authentification should work. It it don't, increase the debug level to get some hints about the problems.

Run this tools without any command to get some help, there is also some documentation about the installation on the wiki.

Hope this helps - cheers,

Henning