You may find one in attachment. You'll have to substitute some stuff there (IP's and domain/realm values). I also suggest you to read getting started document from www.onsip.org
On 5/25/06, Aniruddha Vaidya anir123@gmail.com wrote:
Hey Andrey, Can you send me working Ser configuration file ?
On 5/25/06, Andrey Kouprianov <andrey.kouprianov@gmail.com > wrote:
Btw, which ser are you using?
You should uncomment these lines too
#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)
Then change things like this "if (!uri==myself)" into this "if
(uri!=myself)"
On 5/25/06, Aniruddha Vaidya anir123@gmail.com wrote:
Nope. It just says
"Starting ser: [ OK ]"
BUt if try to get the status of the server
"ser dead but subsys locked"
Message is displayed!
On 5/25/06, Andrey Kouprianov <andrey.kouprianov@gmail.com > wrote:
what does "ser -c" say?
On 5/25/06, Aniruddha Vaidya anir123@gmail.com wrote:
I did the same But Now when I start with new configuration I get Starting SER : PID file /var/run/ser.pid does not exist -- SER start
failed
Error.
On 5/25/06, Andrey Kouprianov < andrey.kouprianov@gmail.com> wrote:
Read
# Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/ser/modules/auth.so" #loadmodule
"/usr/local/lib/ser/modules/auth_db.so"
On 5/25/06, Aniruddha Vaidya < anir123@gmail.com > wrote: > Hello All, > I'm trying to enable the authentication feature in SER. But its
not
accepted
> by the server. > This is my ser.cfg file. > > Can you tell me whats wrong ? > > # > # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters
> > #debug=3 # debug level (cmd line: -dddddddddd) > #fork=yes > #log_stderror=no # (cmd line: -E) > > # Uncomment these lines to enter debugging mode > #fork=no > #log_stderror=yes > # > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/ser_fifo" > > # ------------------ module loading > ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule
"/usr/local/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/sl.so" > loadmodule "/usr/local/lib/ser/modules/tm.so" > loadmodule "/usr/local/lib/ser/modules/rr.so" > loadmodule
"/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule
"/usr/local/lib/ser/modules/usrloc.so"
> loadmodule
"/usr/local/lib/ser/modules/registrar.so"
> loadmodule
"/usr/local/lib/ser/modules/textops.so"
> > # Uncomment this if you want digest authentication > # mysql.so must be loaded ! > #loadmodule
"/usr/local/lib/ser/modules/auth.so"
> #loadmodule
"/usr/local/lib/ser/modules/auth_db.so"
> > # ----------------- setting module-specific parameters
> > # -- usrloc params -- > > #modparam("usrloc", "db_mode", 0) > > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_mode", 2) > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > # > # If you set "calculate_ha1" parameter to yes (which true in
this
config),
> # uncomment also the following parameter) > # > modparam("auth_db", "password_column", "password") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing
logic
> > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > break; > }; > > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > break; > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > route(1); > break; > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > > # Uncomment this if you want to use digest authentication > if (!www_authorize("<InternalSER>", > "subscriber")) { > www_challenge("<InternalSER>", "0"); > break; > }; > > save("location"); > break; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > break; > }; > > # native SIP destinations are handled using our USRLOC
DB
> if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > break; > }; > }; > append_hf("P-hint: usrloc applied\r\n"); > route(1); > } > > route[1] > { > # send it out now; use stateful forwarding as it works
reliably
> # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; > } > > > Thanks, > Aniruddha > > _______________________________________________ > Serusers mailing list > Serusers@lists.iptel.org >
http://lists.iptel.org/mailman/listinfo/serusers
> > > _______________________________________________ Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Serusers mailing list Serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Andrey Kouprianov