26 Feb
2017
26 Feb
'17
6:33 p.m.
Let's suppose that i have two machines with installed asterisk and one with
kamailio. I would like have routing based on sip domain. for domain
sip.domain1.com send sip signalling to asterisk#1 server and for
sip.domain2.com send to asterisk#2 server. What i should use? Domain module
or what ?
Tomasz
27 Feb
27 Feb
1:22 p.m.
Depends on where you want the registration to be done. If you want it done
on each asterisk independently, you can use load balancing. If you want it
done in kamailio, you need multidomain and route accordingly.
On Sun, Feb 26, 2017 at 6:33 PM przeqpiciel <przeqpiciel(a)gmail.com> wrote:
Let's suppose that i have two machines with
installed asterisk and one
with kamailio. I would like have routing based on sip domain. for domain
sip.domain1.com send sip signalling to asterisk#1 server and for
sip.domain2.com send to asterisk#2 server. What i should use? Domain
module or what ?
Tomasz
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
6:35 p.m.
On Sun, Feb 26, 2017 at 06:33:08PM +0100, przeqpiciel wrote:
Let's suppose that i have two machines with
installed asterisk and one with
kamailio. I would like have routing based on sip domain. for domain
sip.domain1.com send sip signalling to asterisk#1 server and for
sip.domain2.com send to asterisk#2 server. What i should use? Domain module
or what ?
The low tech solution is to do something based on $rd:
if($rd=="sip.domain1.com")
{
$du="sip:1.2.3.4";
}
else if(($rd=="sip.domain2.com")
{
$du="sip:2.3.4.5";
}
//RELAY
7:11 p.m.
Thanm you for respond. I would like to have a farm of asterisks for one
domain and few single asterisk for dedicated domains. So probably i have to
check destination domain and after that if i found this domain in my DB
then i could use dispatcher module. Am i right?
27.02.2017 6:35 PM "Daniel Tryba" <d.tryba(a)pocos.nl> napisał(a):
On Sun, Feb 26, 2017 at 06:33:08PM +0100, przeqpiciel
wrote:
Let's suppose that i have two machines with
installed asterisk and one
with
kamailio. I would like have routing based on sip
domain. for domain
sip.domain1.com send sip signalling to asterisk#1 server and for
sip.domain2.com send to asterisk#2 server. What i should use? Domain
module
or what ?
The low tech solution is to do something based on $rd:
if($rd=="sip.domain1.com")
{
$du="sip:1.2.3.4";
}
else if(($rd=="sip.domain2.com")
{
$du="sip:2.3.4.5";
}
//RELAY
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
28 Feb
28 Feb
10:41 a.m.
On Mon, Feb 27, 2017 at 07:11:28PM +0100, przeqpiciel wrote:
Thanm you for respond. I would like to have a farm of
asterisks for one
domain and few single asterisk for dedicated domains. So probably i have to
check destination domain and after that if i found this domain in my DB
then i could use dispatcher module. Am i right?
Yes, the dispatcher module would apply as a solution, it essentially
sets $du. Just set an avp based on domain and use that avp as a
selector:
if(!ds_select_dst($avp(dispatcherid), $avp(dispatcheralgo)))
{
send_reply("404", "No dispatcher available");
exit;
}
2637
days inactive
2639
days old
4 comments
3 participants
participants (3)
-
Daniel Tryba -
David Villasmil -
przeqpiciel