ERROR: <core> [core/ppcfg.c:275]: pp_ifdef_level_error(): different number of preprocessor directives: 1 more #!if[n]def as #!endif
25 Apr
2024
25 Apr
'24
3:47 p.m.
Hi,
I am trying to learn Kamailio to set up a SIP/RTP proxy for WebRTC with
FreeSWITCH, and I wanted to use this configuration file template as a
starting point.
(Source: https://github.com/havfo/WEBRTC-to-SIP)
But i have the error : *ERROR: [core/ppcfg.c:275]:
pp_ifdef_level_error(): different number of preprocessor directives: 1
more #!if[n]def as #!endif*
I don't understand because I checked and everything seems okay with the
if/endif statements to me.
|# grep '#!ifndef' kamailio.cfg | wc -l 2 # grep '#!ifdef' kamailio.cfg
| wc -l 49 # grep '#!endif' kamailio.cfg | wc -l 51 |
And it's ok for chat gpt too :
|#!ifdef : 49 occurrences #!ifndef : 2 occurrences Total (#!ifdef and
#!ifndef) : 51 occurrences #!endif : 51 occurrences |
Is there a problem with the parser or a compatibility problem (i am on*5.6.3*) ?
|#!KAMAILIO # #!define WITH_MYSQL #!define WITH_AUTH #!define
WITH_USRLOCDB #!define WITH_TLS #!define WITH_HOMER #!define
WITH_WEBSOCKETS #!define WITH_ANTIFLOOD #!define WITH_IPV6 ##!define
WITH_BRIDGE_ON_FAIL #!define WITH_LOCALHOST_WS ##!define
WITH_LOCALHOST_SIP #!substdef "!MY_SIP_PORT!5060!g" #!substdef
"!MY_SIPS_PORT!5061!g" #!substdef "!MY_WS_PORT!8080!g" #!substdef
"!MY_WSS_PORT!4443!g" #!substdef "!MY_IP4_ADDR!XXXXX-XXXXX!g"
#!substdef
"!IP4_LOCALHOST!127.0.0.1!g" #!substdef
"!MY_WS4_ADDR!tcp:MY_IP4_ADDR:MY_WS_PORT!g" #!substdef
"!MY_WSS4_ADDR!tls:MY_IP4_ADDR:MY_WSS_PORT!g" #!substdef
"!LOCALHOST_WS4_ADDR!tcp:IP4_LOCALHOST:MY_WS_PORT!g" #!substdef
"!LOCALHOST_WSS4_ADDR!tls:IP4_LOCALHOST:MY_WSS_PORT!g" #!ifdef WITH_IPV6
#!substdef "!MY_IP6_ADDR![XXXXXX-XXXXXX]!g" #!substdef
"!IP6_LOCALHOST![::1]!g" #!substdef
"!MY_WS6_ADDR!tcp:MY_IP6_ADDR:MY_WS_PORT!g" #!substdef
"!MY_WSS6_ADDR!tls:MY_IP6_ADDR:MY_WSS_PORT!g" #!substdef
"!LOCALHOST_WS6_ADDR!tcp:IP6_LOCALHOST:MY_WS_PORT!g" #!substdef
"!LOCALHOST_WSS6_ADDR!tls:IP6_LOCALHOST:MY_WSS_PORT!g" #!endif
#!substdef "!MY_DOMAIN!XXXX-XXXX!g" # *** Value defines - IDs used later
in config #!ifdef WITH_MYSQL # - database URL - used to connect to
database server by modules such # as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL #!define DBURL
"mysql://kamailio:kamailiorw@localhost/kamailio" #!endif #!endif # -
flags # FLT_ - per transaction (message) flags # FLB_ - per branch flags
#!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING 7
#!define FLB_RTPWS 8 #!define FLB_IPV6 9 #!define FLB_V4V6 10 #!define
FLB_BRIDGE 11 ####### Global Parameters ######### ### LOG Levels: 3=DBG,
2=INFO, 1=NOTICE, 0=WARN, -1=ERR #!ifdef WITH_DEBUG debug=4
log_stderror=no #!else debug=2 log_stderror=no #!endif memdbg=5 memlog=5
log_facility=LOG_LOCAL0 fork=yes children=4 port=MY_SIP_PORT
tls_port_no=MY_SIPS_PORT #!ifdef WITH_TLS enable_tls=yes #!endif
listen=MY_IP4_ADDR #!ifdef WITH_LOCALHOST_SIP listen=IP4_LOCALHOST
#!endif #!ifdef WITH_IPV6 listen=MY_IP6_ADDR #!ifdef WITH_LOCALHOST_SIP
listen=IP6_LOCALHOST #!endif #!endif #!ifdef WITH_WEBSOCKETS
listen=MY_WS4_ADDR #!ifdef WITH_LOCALHOST_WS listen=LOCALHOST_WS4_ADDR
#!endif #!ifdef WITH_IPV6 listen=MY_WS6_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WS6_ADDR #!endif #!endif #!ifdef WITH_TLS
listen=MY_WSS4_ADDR #!ifdef WITH_LOCALHOST_WS listen=LOCALHOST_WSS4_ADDR
#!endif #!ifdef WITH_IPV6 listen=MY_WSS6_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS6_ADDR #!endif #!endif #!endif #!endif use_dns_cache
= on # Use KAMAILIO internal DNS cache use_dns_failover = on # Depends
on KAMAILIO internal DNS cache dns_srv_loadbalancing = on #
dns_try_naptr = on # dns_retr_time=1 # Time in seconds before retrying a
DNS request dns_retr_no=3 # Number of DNS retransmissions before giving
up # Set protocol preference order - ignore target priority
dns_naptr_ignore_rfc= yes # Ignore target NAPTR priority dns_tls_pref=50
# First priority: TLS dns_tcp_pref=30 # Second priority: TCP
dns_udp_pref=10 # Third priority: UDP tcp_connection_lifetime=3604
tcp_accept_no_cl=yes tcp_rd_buf_size=16384 # set paths to location of
modules (to sources or installation folders) #!ifdef WITH_SRCPATH
mpath="modules/" #!else
mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" #!endif #!ifdef
WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "kex.so"
loadmodule "corex.so" loadmodule "tm.so" loadmodule "tmx.so"
loadmodule
"sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule
"maxfwd.so"
loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule
"textops.so"
loadmodule "siputils.so" loadmodule "xlog.so" loadmodule
"sanity.so"
loadmodule "ctl.so" loadmodule "cfg_rpc.so" loadmodule
"sdpops.so"
loadmodule "textopsx.so" #!ifdef WITH_AUTH loadmodule "auth.so"
loadmodule "auth_db.so" #!ifdef WITH_IPAUTH loadmodule
"permissions.so"
#!endif #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so"
loadmodule "presence_xml.so" #!endif #!ifdef WITH_TLS loadmodule
"tls.so" #!endif #!ifdef WITH_HOMER loadmodule "siptrace.so" #!endif
#!ifdef WITH_WEBSOCKETS loadmodule "xhttp.so" loadmodule
"websocket.so"
loadmodule "nathelper.so" loadmodule "rtpengine.so" #!endif #!ifdef
WITH_ANTIFLOOD loadmodule "htable.so" loadmodule "pike.so" #!endif
#!ifdef WITH_DEBUG loadmodule "debugger.so" #!endif # -----------------
setting module-specific parameters --------------- # ----- rr params
----- # add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR
(no need for this script) modparam("rr", "append_fromtag", 0) # -----
registrar params ----- modparam("registrar", "method_filtering", 1) #
max value for expires of registrations modparam("registrar",
"max_expires", 3600) # ----- usrloc params ----- /* enable DB
persistency for location entries */ #!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL) modparam("usrloc",
"db_mode", 2)
#!endif # ----- auth_db params ----- #!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL) modparam("auth_db",
"calculate_ha1", 1) modparam("auth_db", "password_column",
"password")
modparam("auth_db", "load_credentials", "") #!endif #!ifdef
WITH_PRESENCE # ----- presence params ----- modparam("presence",
"db_url", DBURL) # ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml",
"force_active", 1) #!endif ##!ifdef WITH_NAT # ----- rtpproxy params
----- modparam("rtpengine", "rtpengine_sock",
"udp:127.0.0.1:22222")
modparam("rtpengine", "extra_id_pv", "$avp(extra_id)") #
----- nathelper
params ----- modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper",
"sipping_bflag", FLB_NATSIPPING) modparam("nathelper",
"sipping_from",
"sip:pinger@XXXX-XXXX") modparam("nathelper|registrar",
"received_avp",
"$avp(RECEIVED)") modparam("usrloc", "nat_bflag", FLB_NATB)
##!endif #
----- corex params ----- modparam("corex", "alias_subdomains",
"MY_DOMAIN") #!ifdef WITH_TLS # ----- tls params ----- modparam("tls",
"config", "/etc/kamailio/tls.cfg") modparam("tls",
"tls_force_run", 1)
#!endif #!ifdef WITH_WEBSOCKETS modparam("nathelper|registrar",
"received_avp", "$avp(RECEIVED)") #!endif #!ifdef WITH_HOMER #Siptrace
modparam("siptrace", "duplicate_uri", "sip:127.0.0.1:9060")
modparam("siptrace", "hep_mode_on", 1) modparam("siptrace",
"trace_to_database", 0) modparam("siptrace", "trace_flag",
22)
modparam("siptrace", "trace_on", 1) #!endif #!ifdef WITH_ANTIFLOOD #
----- pike params ----- modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike",
"remove_latency", 4) # ----- htable params ----- # ip ban htable with
autoexpire after 5 minutes modparam("htable", "htable",
"ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_DEBUG # -----
debugger params ----- modparam("debugger", "cfgtrace", 1) #!endif
####### Routing Logic ######## request_route { #!ifdef WITH_HOMER #
start duplicate the SIP message here sip_trace(); setflag(22); #!endif #
per request initial checks route(REQINIT); xlog("L_INFO", "START: $rm
from $fu (IP:$si:$sp)\n"); #!ifdef WITH_WEBSOCKETS if (nat_uac_test(64))
{ # Do NAT traversal stuff for requests from a WebSocket # connection -
even if it is not behind a NAT! # This won't be needed in the future if
Kamailio and the # WebSocket client support Outbound and Path.
force_rport(); if (is_method("REGISTER")) { fix_nated_register(); } else
if (!add_contact_alias()) { xlog("L_ERR", "Error aliasing contact
<$ct>\n"); sl_send_reply("400", "Bad Request"); exit; } }
#!endif # NAT
detection route(NATDETECT); # CANCEL processing if (is_method("CANCEL"))
{ if (t_check_trans()) { route(RELAY); } exit; } # handle requests
within SIP dialogs route(WITHINDLG); ### only initial requests (no To
tag) t_check_trans(); # authentication route(AUTH); # record routing for
dialog forming requests (in case they are routed) # - remove preloaded
route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) {
record_route(); } # dispatch requests to foreign domains route(SIPOUT);
### requests for my local domains # handle presence related requests
route(PRESENCE); # handle registrations route(REGISTRAR); if ($rU ==
$null) { # request with no Username in RURI sl_send_reply("484","Address
Incomplete"); exit; } # user location service route(LOCATION); } #
Wrapper for relaying requests route[RELAY] { # enable additional event
routes for forwarded requests # - serial forking, RTP relaying handling,
a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if
(!t_is_set("branch_route")) { t_on_branch("MANAGE_BRANCH"); } } if
(is_method("INVITE|SUBSCRIBE|UPDATE")) { if
(!t_is_set("onreply_route"))
{ t_on_reply("MANAGE_REPLY"); } } if (is_method("INVITE")) { if
(!t_is_set("failure_route")) { t_on_failure("MANAGE_FAILURE"); } } if
(!t_relay()) { sl_reply_error(); } exit; } # Per SIP request initial
checks route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same
IP and traffic ban for a while # be sure you exclude checking trusted
peers, such as pstn gateways # - local host excluded (e.g., loop to
self) if (src_ip != myself) { if ($sht(ipban=>$si) != $null) { # ip is
already blocked xdbg("request from blocked IP - $rm from $fu
(IP:$si:$sp)\n"); exit; } if (!pike_check_req()) {
xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
$sht(ipban=>$si) = 1; exit; } } #!endif if
(!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many
Hops"); exit; } if (!sanity_check("1511", "7")) {
xlog("Malformed SIP
message from $si:$sp\n"); exit; } } # Handle requests within SIP dialogs
route[WITHINDLG] { if (has_totag()) { # sequential request withing a
dialog should # take the path determined by record-routing if
(loose_route()) { #!ifdef WITH_WEBSOCKETS if ($du == "") { if
(!handle_ruri_alias()) { xlog("L_ERR", "Bad alias <$ru>\n");
sl_send_reply("400", "Bad Request"); exit; } } #!endif route(DLGURI);
if
(is_method("ACK")) { # ACK is forwarded statelessy route(NATMANAGE); }
else if (is_method("NOTIFY")) { # Add Record-Route for in-dialog NOTIFY
as per RFC 6665. record_route(); } route(RELAY); } else { if
(is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe
requests route(PRESENCE); exit; } if (is_method("ACK")) { if
(t_check_trans()) { # no loose-route, but stateful ACK; # must be an ACK
after a 487 # or e.g. 404 from upstream server route(RELAY); exit; }
else { # ACK without matching transaction ... ignore and discard exit; }
} sl_send_reply("404","Not here"); } exit; } } # Handle SIP
registrations route[REGISTRAR] { if (is_method("REGISTER")) { if
(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to do
SIP NAT pinging ## setbflag(FLB_NATSIPPING); } #!ifdef WITH_IPV6 if (af
== INET6) { setbflag(FLB_IPV6); } #!endif if (!save("location")) {
sl_reply_error(); } exit; } } # USER location service route[LOCATION] {
if (!lookup("location")) { $var(rc) = $rc; t_newtran(); switch
($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit;
case -2: send_reply("405", "Method Not Allowed"); exit; } }
route(RELAY); exit; } # Presence server route route[PRESENCE] { if
(!is_method("PUBLISH|SUBSCRIBE")) { return; } if
(is_method("SUBSCRIBE")
&& $hdr(Event) == "message-summary") { # returns here if no voicemail
server is configured sl_send_reply("404", "No voicemail service");
exit;
} #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; } if
(is_method("PUBLISH")) { handle_publish(); t_release(); } else if
(is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit;
#!endif # if presence enabled, this part will not be executed if
(is_method("PUBLISH") || $rU == $null) { sl_send_reply("404",
"Not
here"); exit; } return; } # Authentication route route[AUTH] { #!ifdef
WITH_AUTH if (is_method("REGISTER") || from_uri == myself) { #
authenticate requests if (!auth_check("$fd", "subscriber",
"1")) {
auth_challenge("$fd", "0"); exit; } # user authenticated - remove auth
header if (!is_method("REGISTER|PUBLISH")) { consume_credentials(); } }
# if caller is not local subscriber, then check if it calls # a local
destination, otherwise deny, not an open relay here if (from_uri !=
myself && uri != myself) { sl_send_reply("403","Not
relaying"); exit; }
#!endif return; } # Caller NAT detection route route[NATDETECT] {
#!ifdef WITH_IPV6 if(af==INET6) { return; } #!endif force_rport(); if
(nat_uac_test("19")) { if (is_method("REGISTER")) {
fix_nated_register(); } else if (is_first_hop()) { set_contact_alias();
} setflag(FLT_NATS); } return; } # NAT handling route[NATMANAGE] { if
(is_request()) { if (has_totag()) { if (check_route_param("nat=yes")) {
setbflag(FLB_NATB); } if (check_route_param("rtp=bridge")) {
setbflag(FLB_BRIDGE); } if (check_route_param("rtp=ws")) {
setbflag(FLB_RTPWS); } #!ifdef WITH_IPV6 if
(check_route_param("rtp=v46")) { setbflag(FLB_V4V6); } #!endif } } if
(!isbflagset(FLB_BRIDGE)) { return; } if ( !(isflagset(FLT_NATS) ||
isbflagset(FLB_NATB) || isbflagset(FLB_RTPWS) #!ifdef WITH_IPV6 ||
isbflagset(FLB_V4V6) #!endif ) ) { return; } $xavp(r=>$T_branch_idx) =
"replace-origin replace-session-connection"; if (!nat_uac_test("8")) {
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " trust-address"; }
if (is_request()) { if (!has_totag()) { if (!t_is_failure_route()) {
$avp(extra_id) = @via[1].branch + $T_branch_idx; $xavp(r=>$T_branch_idx)
= $xavp(r=>$T_branch_idx) + " via-branch=extra"; } } } if (is_reply()) {
$avp(extra_id) = @via[2].branch + $T_branch_idx; $xavp(r=>$T_branch_idx)
= $xavp(r=>$T_branch_idx) + " via-branch=extra"; } #!ifdef WITH_IPV6 if
(af == INET && isbflagset(FLB_IPV6)) { # IPv4 --> IPv6
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP6"; } else if (af == INET6 && !isbflagset(FLB_IPV6)) {
# IPv6 --> IPv4 $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP4"; } #!endif if (isbflagset(FLB_RTPWS)) { if ($proto
=~ "ws") { # web --> SIP $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " rtcp-mux-demux DTLS=off SDES-off ICE=remove
RTP/AVP"; } else { # SIP --> web $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " rtcp-mux-offer generate-mid DTLS=passive
SDES-off ICE=force RTP/SAVPF"; } } else { if ($proto =~ "ws") { # web
--> web $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
generate-mid DTLS=passive SDES-off ICE=force"; } # else { #
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + ""; # } }
xlog("L_INFO", "NATMANAGE branch_id:$T_branch_idx ruri: $ru, method:$rm,
status:$rs, extra_id: $avp(extra_id), rtpengine_manage:
$xavp(r=>$T_branch_idx)\n"); rtpengine_manage($xavp(r=>$T_branch_idx));
if (is_request()) { if (!has_totag()) { if (t_is_branch_route()) { if
(isbflagset(FLB_NATB)) { add_rr_param(";nat=yes"); } if
(isbflagset(FLB_BRIDGE)) { add_rr_param(";rtp=bridge"); } if
(isbflagset(FLB_RTPWS)) { add_rr_param(";rtp=ws"); } #!ifdef WITH_IPV6
if (isbflagset(FLB_V4V6)) { add_rr_param(";rtp=v46"); } #!endif } } } if
(is_reply()) { if (isbflagset(FLB_NATB)) { if (is_first_hop()) { if (af
== INET) { set_contact_alias(); } } } } return; } # URI update for
dialog requests route[DLGURI] { if (!isdsturiset()) {
handle_ruri_alias(); } return; } # Routing to foreign domains
route[SIPOUT] { if (!uri == myself) { append_hf("P-hint: outbound\r\n");
route(RELAY); } } route[BRIDGING] { if (!has_totag()) { if ($proto =~
"ws" && !($ru =~ "transport=ws")) { # Coming from WS, NOT to
WS
setbflag(FLB_RTPWS); # Need bridging } else if (!($proto =~ "ws") && $ru
=~ "transport=ws") { # Coming from NOT WS, going to WS
setbflag(FLB_RTPWS); # Need bridging } #!ifdef WITH_IPV6 if (af == INET6
&& !isbflagset(FLB_IPV6)) { setbflag(FLB_V4V6); } else if(af == INET &&
isbflagset(FLB_IPV6)) { setbflag(FLB_V4V6); } #!endif } } # manage
outgoing branches branch_route[MANAGE_BRANCH] { xlog("L_INFO",
"MANAGE_BRANCH: New branch [$T_branch_idx] to $ru\n");
t_on_branch_failure("rtpengine"); #!ifndef WITH_BRIDGE_ON_FAIL
setbflag(FLB_BRIDGE); #!endif route(BRIDGING); route(NATMANAGE); } #
manage incoming replies onreply_route[MANAGE_REPLY] { xdbg("incoming
reply\n"); if (status =~ "[12][0-9][0-9]") { route(NATMANAGE); } } #
manage failure routing cases failure_route[MANAGE_FAILURE] {
xlog("L_INFO", "Failure: $rs"); } #!ifdef WITH_WEBSOCKETS
onreply_route
{ if ((($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT) && !(proto == WS ||
proto == WSS))) { xlog("L_WARN", "SIP response received on $Rp\n");
drop; } if (nat_uac_test(64)) { # Do NAT traversal stuff for replies to
a WebSocket connection # - even if it is not behind a NAT! # This won't
be needed in the future if Kamailio and the # WebSocket client support
Outbound and Path. add_contact_alias(); } }
event_route[tm:branch-failure:rtpengine] { xlog("L_INFO", "BRANCH
FAILED: $sel(via[1].branch) + $T_branch_idx"); #!ifdef
WITH_BRIDGE_ON_FAIL if (!isbflagset(FLB_BRIDGE) &&
t_check_status("415|488")) { t_reuse_branch(); setbflag(FLB_BRIDGE);
xlog("L_INFO", "event_route[branch-failure:rtpengine]: trying
again\n");
route(RELAY); } else { $avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra"); xlog("L_INFO",
"event_route[branch-failure:rtpengine]: failed\n"); } #!else
$avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra"); #!endif }
event_route[xhttp:request] { set_reply_close(); set_reply_no_connect();
if ($Rp != MY_WS_PORT #!ifdef WITH_TLS && $Rp != MY_WSS_PORT #!endif ) {
xlog("L_WARN", "HTTP request received on $Rp\n");
xhttp_reply("403",
"Forbidden", "", ""); exit; } xlog("L_INFO",
"HTTP Request Received\n");
if ($hdr(Upgrade) =~ "websocket" && $hdr(Connection) =~
"Upgrade" && $rm
=~ "GET" ) { # Validate Host - make sure the client is using the correct
# alias for WebSockets if ($hdr(Host) == $null || !is_myself("sip:" +
$hdr(Host))) { xlog("L_WARN", "Bad host $hdr(Host)\n");
xhttp_reply("403", "Forbidden", "", ""); exit; } #
Optional... validate
Origin - make sure the client is from an # authorised website. For
example, # # if ($hdr(Origin) != "https://example.com" # && $hdr(Origin)
!= "https://example.com") { # xlog("L_WARN", "Unauthorised client
$hdr(Origin)\n"); # xhttp_reply("403", "Forbidden", "",
""); # exit; # }
# Optional... perform HTTP authentication # ws_handle_handshake() exits
(no further configuration file # processing of the request) when
complete. if (ws_handle_handshake()) { # Optional... cache some
information about the # successful connection exit; } }
xhttp_reply("404", "Not Found", "", ""); }
event_route[websocket:closed]
{ xlog("L_INFO", "WebSocket connection from $si:$sp has closed\n"); }
#!endif |
Thank.
25 Apr
25 Apr
5:18 p.m.
anton@intel:/etc/kamailio$ sudo kamailio -c kamailio.cfg
Listening on
udp: 127.0.0.1:5060
udp: 192.168.0.143:5060
udp: 172.17.0.1:5060
udp: 172.18.0.1:5060
tcp: 127.0.0.1:5060
tcp: 192.168.0.143:5060
tcp: 172.17.0.1:5060
tcp: 172.18.0.1:5060
Aliases:
tcp: intel:5060
tcp: localhost:5060
udp: intel:5060
udp: localhost:5060
config file ok, exiting...
Description: Debian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye
On Thu, Apr 25, 2024 at 4:43 PM Tristan Ferreira via sr-users <
sr-users(a)lists.kamailio.org> wrote:
Hi,
I am trying to learn Kamailio to set up a SIP/RTP proxy for WebRTC with
FreeSWITCH, and I wanted to use this configuration file template as a
starting point.
(Source: https://github.com/havfo/WEBRTC-to-SIP)
But i have the error : *ERROR: [core/ppcfg.c:275]:
pp_ifdef_level_error(): different number of preprocessor directives: 1 more
#!if[n]def as #!endif*
I don't understand because I checked and everything seems okay with the
if/endif statements to me.
# grep '#!ifndef' kamailio.cfg | wc -l
2
# grep '#!ifdef' kamailio.cfg | wc -l
49
# grep '#!endif' kamailio.cfg | wc -l
51
And it's ok for chat gpt too :
#!ifdef : 49 occurrences
#!ifndef : 2 occurrences
Total (#!ifdef and #!ifndef) : 51 occurrences
#!endif : 51 occurrences
Is there a problem with the parser or a compatibility problem (i am on *5.6.3*) ?
#!KAMAILIO
#
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_TLS
#!define WITH_HOMER
#!define WITH_WEBSOCKETS
#!define WITH_ANTIFLOOD
#!define WITH_IPV6
##!define WITH_BRIDGE_ON_FAIL
#!define WITH_LOCALHOST_WS
##!define WITH_LOCALHOST_SIP
#!substdef "!MY_SIP_PORT!5060!g"
#!substdef "!MY_SIPS_PORT!5061!g"
#!substdef "!MY_WS_PORT!8080!g"
#!substdef "!MY_WSS_PORT!4443!g"
#!substdef "!MY_IP4_ADDR!XXXXX-XXXXX!g"
#!substdef "!IP4_LOCALHOST!127.0.0.1!g"
#!substdef "!MY_WS4_ADDR!tcp:MY_IP4_ADDR:MY_WS_PORT!g"
#!substdef "!MY_WSS4_ADDR!tls:MY_IP4_ADDR:MY_WSS_PORT!g"
#!substdef "!LOCALHOST_WS4_ADDR!tcp:IP4_LOCALHOST:MY_WS_PORT!g"
#!substdef "!LOCALHOST_WSS4_ADDR!tls:IP4_LOCALHOST:MY_WSS_PORT!g"
#!ifdef WITH_IPV6
#!substdef "!MY_IP6_ADDR![XXXXXX-XXXXXX]!g"
#!substdef "!IP6_LOCALHOST![::1]!g"
#!substdef "!MY_WS6_ADDR!tcp:MY_IP6_ADDR:MY_WS_PORT!g"
#!substdef "!MY_WSS6_ADDR!tls:MY_IP6_ADDR:MY_WSS_PORT!g"
#!substdef "!LOCALHOST_WS6_ADDR!tcp:IP6_LOCALHOST:MY_WS_PORT!g"
#!substdef "!LOCALHOST_WSS6_ADDR!tls:IP6_LOCALHOST:MY_WSS_PORT!g"
#!endif
#!substdef "!MY_DOMAIN!XXXX-XXXX!g"
# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modules such
# as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL
#!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio"
#!endif
#!endif
# - flags
# FLT_ - per transaction (message) flags
# FLB_ - per branch flags
#!define FLT_NATS 5
#!define FLB_NATB 6
#!define FLB_NATSIPPING 7
#!define FLB_RTPWS 8
#!define FLB_IPV6 9
#!define FLB_V4V6 10
#!define FLB_BRIDGE 11
####### Global Parameters #########
### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=no
#!else
debug=2
log_stderror=no
#!endif
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
fork=yes
children=4
port=MY_SIP_PORT
tls_port_no=MY_SIPS_PORT
#!ifdef WITH_TLS
enable_tls=yes
#!endif
listen=MY_IP4_ADDR
#!ifdef WITH_LOCALHOST_SIP
listen=IP4_LOCALHOST
#!endif
#!ifdef WITH_IPV6
listen=MY_IP6_ADDR
#!ifdef WITH_LOCALHOST_SIP
listen=IP6_LOCALHOST
#!endif
#!endif
#!ifdef WITH_WEBSOCKETS
listen=MY_WS4_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WS4_ADDR
#!endif
#!ifdef WITH_IPV6
listen=MY_WS6_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WS6_ADDR
#!endif
#!endif
#!ifdef WITH_TLS
listen=MY_WSS4_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS4_ADDR
#!endif
#!ifdef WITH_IPV6
listen=MY_WSS6_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS6_ADDR
#!endif
#!endif
#!endif
#!endif
use_dns_cache = on # Use KAMAILIO internal DNS cache
use_dns_failover = on # Depends on KAMAILIO internal DNS cache
dns_srv_loadbalancing = on #
dns_try_naptr = on #
dns_retr_time=1 # Time in seconds before retrying a DNS request
dns_retr_no=3 # Number of DNS retransmissions before giving up
# Set protocol preference order - ignore target priority
dns_naptr_ignore_rfc= yes # Ignore target NAPTR priority
dns_tls_pref=50 # First priority: TLS
dns_tcp_pref=30 # Second priority: TCP
dns_udp_pref=10 # Third priority: UDP
tcp_connection_lifetime=3604
tcp_accept_no_cl=yes
tcp_rd_buf_size=16384
# set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules/"
#!else
mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"
#!endif
#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "sdpops.so"
loadmodule "textopsx.so"
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_HOMER
loadmodule "siptrace.so"
#!endif
#!ifdef WITH_WEBSOCKETS
loadmodule "xhttp.so"
loadmodule "websocket.so"
loadmodule "nathelper.so"
loadmodule "rtpengine.so"
#!endif
#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif
#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif
# ----------------- setting module-specific parameters ---------------
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
# max value for expires of registrations
modparam("registrar", "max_expires", 3600)
# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
#!endif
# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
#!endif
#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif
##!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpengine", "rtpengine_sock",
"udp:127.0.0.1:22222")
modparam("rtpengine", "extra_id_pv", "$avp(extra_id)")
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from",
"sip:pinger@XXXX-XXXX")
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
##!endif
# ----- corex params -----
modparam("corex", "alias_subdomains", "MY_DOMAIN")
#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")
modparam("tls", "tls_force_run", 1)
#!endif
#!ifdef WITH_WEBSOCKETS
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
#!endif
#!ifdef WITH_HOMER
#Siptrace
modparam("siptrace", "duplicate_uri",
"sip:127.0.0.1:9060")
modparam("siptrace", "hep_mode_on", 1)
modparam("siptrace", "trace_to_database", 0)
modparam("siptrace", "trace_flag", 22)
modparam("siptrace", "trace_on", 1)
#!endif
#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)
# ----- htable params -----
# ip ban htable with autoexpire after 5 minutes
modparam("htable", "htable",
"ipban=>size=8;autoexpire=300;")
#!endif
#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
#!endif
####### Routing Logic ########
request_route {
#!ifdef WITH_HOMER
# start duplicate the SIP message here
sip_trace();
setflag(22);
#!endif
# per request initial checks
route(REQINIT);
xlog("L_INFO", "START: $rm from $fu (IP:$si:$sp)\n");
#!ifdef WITH_WEBSOCKETS
if (nat_uac_test(64)) {
# Do NAT traversal stuff for requests from a WebSocket
# connection - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
force_rport();
if (is_method("REGISTER")) {
fix_nated_register();
} else if (!add_contact_alias()) {
xlog("L_ERR", "Error aliasing contact <$ct>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
#!endif
# NAT detection
route(NATDETECT);
# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans()) {
route(RELAY);
}
exit;
}
# handle requests within SIP dialogs
route(WITHINDLG);
### only initial requests (no To tag)
t_check_trans();
# authentication
route(AUTH);
# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE")) {
record_route();
}
# dispatch requests to foreign domains
route(SIPOUT);
### requests for my local domains
# handle presence related requests
route(PRESENCE);
# handle registrations
route(REGISTRAR);
if ($rU == $null) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# user location service
route(LOCATION);
}
# Wrapper for relaying requests
route[RELAY] {
# enable additional event routes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
if (!t_is_set("branch_route")) {
t_on_branch("MANAGE_BRANCH");
}
}
if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
if (!t_is_set("onreply_route")) {
t_on_reply("MANAGE_REPLY");
}
}
if (is_method("INVITE")) {
if (!t_is_set("failure_route")) {
t_on_failure("MANAGE_FAILURE");
}
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
# flood dection from same IP and traffic ban for a while
# be sure you exclude checking trusted peers, such as pstn gateways
# - local host excluded (e.g., loop to self)
if (src_ip != myself) {
if ($sht(ipban=>$si) != $null) {
# ip is already blocked
xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
exit;
}
if (!pike_check_req()) {
xlog("L_ALERT","ALERT: pike blocking $rm from $fu
(IP:$si:$sp)\n");
$sht(ipban=>$si) = 1;
exit;
}
}
#!endif
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if (!sanity_check("1511", "7")) {
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
}
# Handle requests within SIP dialogs
route[WITHINDLG] {
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
#!ifdef WITH_WEBSOCKETS
if ($du == "") {
if (!handle_ruri_alias()) {
xlog("L_ERR", "Bad alias <$ru>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
#!endif
route(DLGURI);
if (is_method("ACK")) {
# ACK is forwarded statelessy
route(NATMANAGE);
} else if (is_method("NOTIFY")) {
# Add Record-Route for in-dialog NOTIFY as per RFC 6665.
record_route();
}
route(RELAY);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(PRESENCE);
exit;
}
if (is_method("ACK")) {
if (t_check_trans()) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
route(RELAY);
exit;
} else {
# ACK without matching transaction ... ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
}
# Handle SIP registrations
route[REGISTRAR] {
if (is_method("REGISTER")) {
if (isflagset(FLT_NATS)) {
setbflag(FLB_NATB);
# uncomment next line to do SIP NAT pinging
## setbflag(FLB_NATSIPPING);
}
#!ifdef WITH_IPV6
if (af == INET6) {
setbflag(FLB_IPV6);
}
#!endif
if (!save("location")) {
sl_reply_error();
}
exit;
}
}
# USER location service
route[LOCATION] {
if (!lookup("location")) {
$var(rc) = $rc;
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
}
route(RELAY);
exit;
}
# Presence server route
route[PRESENCE] {
if (!is_method("PUBLISH|SUBSCRIBE")) {
return;
}
if (is_method("SUBSCRIBE") && $hdr(Event) ==
"message-summary") {
# returns here if no voicemail server is configured
sl_send_reply("404", "No voicemail service");
exit;
}
#!ifdef WITH_PRESENCE
if (!t_newtran()) {
sl_reply_error();
exit;
}
if (is_method("PUBLISH")) {
handle_publish();
t_release();
} else if (is_method("SUBSCRIBE")) {
handle_subscribe();
t_release();
}
exit;
#!endif
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU == $null) {
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Authentication route
route[AUTH] {
#!ifdef WITH_AUTH
if (is_method("REGISTER") || from_uri == myself) {
# authenticate requests
if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0");
exit;
}
# user authenticated - remove auth header
if (!is_method("REGISTER|PUBLISH")) {
consume_credentials();
}
}
# if caller is not local subscriber, then check if it calls
# a local destination, otherwise deny, not an open relay here
if (from_uri != myself && uri != myself) {
sl_send_reply("403","Not relaying");
exit;
}
#!endif
return;
}
# Caller NAT detection route
route[NATDETECT] {
#!ifdef WITH_IPV6
if(af==INET6) {
return;
}
#!endif
force_rport();
if (nat_uac_test("19")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else if (is_first_hop()) {
set_contact_alias();
}
setflag(FLT_NATS);
}
return;
}
# NAT handling
route[NATMANAGE] {
if (is_request()) {
if (has_totag()) {
if (check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
if (check_route_param("rtp=bridge")) {
setbflag(FLB_BRIDGE);
}
if (check_route_param("rtp=ws")) {
setbflag(FLB_RTPWS);
}
#!ifdef WITH_IPV6
if (check_route_param("rtp=v46")) {
setbflag(FLB_V4V6);
}
#!endif
}
}
if (!isbflagset(FLB_BRIDGE)) {
return;
}
if (
!(isflagset(FLT_NATS)
|| isbflagset(FLB_NATB)
|| isbflagset(FLB_RTPWS)
#!ifdef WITH_IPV6
|| isbflagset(FLB_V4V6)
#!endif
)
) {
return;
}
$xavp(r=>$T_branch_idx) = "replace-origin replace-session-connection";
if (!nat_uac_test("8")) {
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " trust-address";
}
if (is_request()) {
if (!has_totag()) {
if (!t_is_failure_route()) {
$avp(extra_id) = @via[1].branch + $T_branch_idx;
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
via-branch=extra";
}
}
}
if (is_reply()) {
$avp(extra_id) = @via[2].branch + $T_branch_idx;
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
via-branch=extra";
}
#!ifdef WITH_IPV6
if (af == INET && isbflagset(FLB_IPV6)) { # IPv4 --> IPv6
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP6";
} else if (af == INET6 && !isbflagset(FLB_IPV6)) { # IPv6 --> IPv4
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP4";
}
#!endif
if (isbflagset(FLB_RTPWS)) {
if ($proto =~ "ws") { # web --> SIP
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-demux
DTLS=off SDES-off ICE=remove RTP/AVP";
} else { # SIP --> web
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-offer
generate-mid DTLS=passive SDES-off ICE=force RTP/SAVPF";
}
} else {
if ($proto =~ "ws") { # web --> web
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " generate-mid
DTLS=passive SDES-off ICE=force";
}
# else {
# $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "";
# }
}
xlog("L_INFO", "NATMANAGE branch_id:$T_branch_idx ruri: $ru, method:$rm,
status:$rs, extra_id: $avp(extra_id), rtpengine_manage:
$xavp(r=>$T_branch_idx)\n");
rtpengine_manage($xavp(r=>$T_branch_idx));
if (is_request()) {
if (!has_totag()) {
if (t_is_branch_route()) {
if (isbflagset(FLB_NATB)) {
add_rr_param(";nat=yes");
}
if (isbflagset(FLB_BRIDGE)) {
add_rr_param(";rtp=bridge");
}
if (isbflagset(FLB_RTPWS)) {
add_rr_param(";rtp=ws");
}
#!ifdef WITH_IPV6
if (isbflagset(FLB_V4V6)) {
add_rr_param(";rtp=v46");
}
#!endif
}
}
}
if (is_reply()) {
if (isbflagset(FLB_NATB)) {
if (is_first_hop()) {
if (af == INET) {
set_contact_alias();
}
}
}
}
return;
}
# URI update for dialog requests
route[DLGURI] {
if (!isdsturiset()) {
handle_ruri_alias();
}
return;
}
# Routing to foreign domains
route[SIPOUT] {
if (!uri == myself) {
append_hf("P-hint: outbound\r\n");
route(RELAY);
}
}
route[BRIDGING] {
if (!has_totag()) {
if ($proto =~ "ws" && !($ru =~ "transport=ws")) { # Coming
from WS, NOT to WS
setbflag(FLB_RTPWS); # Need bridging
} else if (!($proto =~ "ws") && $ru =~ "transport=ws") { #
Coming from NOT WS, going to WS
setbflag(FLB_RTPWS); # Need bridging
}
#!ifdef WITH_IPV6
if (af == INET6 && !isbflagset(FLB_IPV6)) {
setbflag(FLB_V4V6);
} else if(af == INET && isbflagset(FLB_IPV6)) {
setbflag(FLB_V4V6);
}
#!endif
}
}
# manage outgoing branches
branch_route[MANAGE_BRANCH] {
xlog("L_INFO", "MANAGE_BRANCH: New branch [$T_branch_idx] to
$ru\n");
t_on_branch_failure("rtpengine");
#!ifndef WITH_BRIDGE_ON_FAIL
setbflag(FLB_BRIDGE);
#!endif
route(BRIDGING);
route(NATMANAGE);
}
# manage incoming replies
onreply_route[MANAGE_REPLY] {
xdbg("incoming reply\n");
if (status =~ "[12][0-9][0-9]") {
route(NATMANAGE);
}
}
# manage failure routing cases
failure_route[MANAGE_FAILURE] {
xlog("L_INFO", "Failure: $rs");
}
#!ifdef WITH_WEBSOCKETS
onreply_route {
if ((($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT) && !(proto == WS || proto ==
WSS))) {
xlog("L_WARN", "SIP response received on $Rp\n");
drop;
}
if (nat_uac_test(64)) {
# Do NAT traversal stuff for replies to a WebSocket connection
# - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
add_contact_alias();
}
}
event_route[tm:branch-failure:rtpengine] {
xlog("L_INFO", "BRANCH FAILED: $sel(via[1].branch) +
$T_branch_idx");
#!ifdef WITH_BRIDGE_ON_FAIL
if (!isbflagset(FLB_BRIDGE) && t_check_status("415|488")) {
t_reuse_branch();
setbflag(FLB_BRIDGE);
xlog("L_INFO", "event_route[branch-failure:rtpengine]: trying
again\n");
route(RELAY);
} else {
$avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra");
xlog("L_INFO", "event_route[branch-failure:rtpengine]:
failed\n");
}
#!else
$avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra");
#!endif
}
event_route[xhttp:request] {
set_reply_close();
set_reply_no_connect();
if ($Rp != MY_WS_PORT
#!ifdef WITH_TLS
&& $Rp != MY_WSS_PORT
#!endif
) {
xlog("L_WARN", "HTTP request received on $Rp\n");
xhttp_reply("403", "Forbidden", "", "");
exit;
}
xlog("L_INFO", "HTTP Request Received\n");
if ($hdr(Upgrade) =~ "websocket"
&& $hdr(Connection) =~ "Upgrade"
&& $rm =~ "GET"
) {
# Validate Host - make sure the client is using the correct
# alias for WebSockets
if ($hdr(Host) == $null || !is_myself("sip:" + $hdr(Host))) {
xlog("L_WARN", "Bad host $hdr(Host)\n");
xhttp_reply("403", "Forbidden", "", "");
exit;
}
# Optional... validate Origin - make sure the client is from an
# authorised website. For example,
#
# if ($hdr(Origin) != "https://example.com" <https://example.com>
# && $hdr(Origin) != "https://example.com"
<https://example.com>) {
# xlog("L_WARN", "Unauthorised client $hdr(Origin)\n");
# xhttp_reply("403", "Forbidden", "", "");
# exit;
# }
# Optional... perform HTTP authentication
# ws_handle_handshake() exits (no further configuration file
# processing of the request) when complete.
if (ws_handle_handshake()) {
# Optional... cache some information about the
# successful connection
exit;
}
}
xhttp_reply("404", "Not Found", "", "");
}
event_route[websocket:closed] {
xlog("L_INFO", "WebSocket connection from $si:$sp has
closed\n");
}
#!endif
Thank.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
--
*Antony*
satskiy.a(a)gmail.com
+380669197533
+48727830247
5:30 p.m.
Hi,
Thank your command helped me to find the problem (typo).
I thougt i used it and had no result but not.
Best regards.
Le 25/04/2024 à 17:18, Antonio a écrit :
anton@intel:/etc/kamailio$ sudo kamailio -c
kamailio.cfg
Listening on
udp: 127.0.0.1:5060 <http://127.0.0.1:5060>
udp: 192.168.0.143:5060 <http://192.168.0.143:5060>
udp: 172.17.0.1:5060 <http://172.17.0.1:5060>
udp: 172.18.0.1:5060 <http://172.18.0.1:5060>
tcp: 127.0.0.1:5060 <http://127.0.0.1:5060>
tcp: 192.168.0.143:5060 <http://192.168.0.143:5060>
tcp: 172.17.0.1:5060 <http://172.17.0.1:5060>
tcp: 172.18.0.1:5060 <http://172.18.0.1:5060>
Aliases:
tcp: intel:5060
tcp: localhost:5060
udp: intel:5060
udp: localhost:5060
config file ok, exiting...
Description: Debian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye
On Thu, Apr 25, 2024 at 4:43 PM Tristan Ferreira via sr-users
<sr-users(a)lists.kamailio.org> wrote:
Hi,
I am trying to learn Kamailio to set up a SIP/RTP proxy for WebRTC
with FreeSWITCH, and I wanted to use this configuration file
template as a starting point.
(Source: https://github.com/havfo/WEBRTC-to-SIP)
But i have the error : *ERROR: [core/ppcfg.c:275]:
pp_ifdef_level_error(): different number of preprocessor
directives: 1 more #!if[n]def as #!endif*
I don't understand because I checked and everything seems okay
with the if/endif statements to me.
|# grep '#!ifndef' kamailio.cfg | wc -l 2 # grep '#!ifdef'
kamailio.cfg | wc -l 49 # grep '#!endif' kamailio.cfg | wc -l 51 |
And it's ok for chat gpt too :
|#!ifdef : 49 occurrences #!ifndef : 2 occurrences Total (#!ifdef
and #!ifndef) : 51 occurrences #!endif : 51 occurrences |
Is there a problem with the parser or a compatibility problem (i am on*5.6.3*) ?
|#!KAMAILIO # #!define WITH_MYSQL #!define WITH_AUTH #!define
WITH_USRLOCDB #!define WITH_TLS #!define WITH_HOMER #!define
WITH_WEBSOCKETS #!define WITH_ANTIFLOOD #!define WITH_IPV6
##!define WITH_BRIDGE_ON_FAIL #!define WITH_LOCALHOST_WS ##!define
WITH_LOCALHOST_SIP #!substdef "!MY_SIP_PORT!5060!g" #!substdef
"!MY_SIPS_PORT!5061!g" #!substdef "!MY_WS_PORT!8080!g"
#!substdef
"!MY_WSS_PORT!4443!g" #!substdef "!MY_IP4_ADDR!XXXXX-XXXXX!g"
#!substdef "!IP4_LOCALHOST!127.0.0.1!g" #!substdef
"!MY_WS4_ADDR!tcp:MY_IP4_ADDR:MY_WS_PORT!g" #!substdef
"!MY_WSS4_ADDR!tls:MY_IP4_ADDR:MY_WSS_PORT!g" #!substdef
"!LOCALHOST_WS4_ADDR!tcp:IP4_LOCALHOST:MY_WS_PORT!g" #!substdef
"!LOCALHOST_WSS4_ADDR!tls:IP4_LOCALHOST:MY_WSS_PORT!g" #!ifdef
WITH_IPV6 #!substdef "!MY_IP6_ADDR![XXXXXX-XXXXXX]!g" #!substdef
"!IP6_LOCALHOST![::1]!g" #!substdef
"!MY_WS6_ADDR!tcp:MY_IP6_ADDR:MY_WS_PORT!g" #!substdef
"!MY_WSS6_ADDR!tls:MY_IP6_ADDR:MY_WSS_PORT!g" #!substdef
"!LOCALHOST_WS6_ADDR!tcp:IP6_LOCALHOST:MY_WS_PORT!g" #!substdef
"!LOCALHOST_WSS6_ADDR!tls:IP6_LOCALHOST:MY_WSS_PORT!g" #!endif
#!substdef "!MY_DOMAIN!XXXX-XXXX!g" # *** Value defines - IDs used
later in config #!ifdef WITH_MYSQL # - database URL - used to
connect to database server by modules such # as: auth_db, acc,
usrloc, a.s.o. #!ifndef DBURL #!define DBURL
"mysql://kamailio:kamailiorw@localhost/kamailio" #!endif #!endif #
- flags # FLT_ - per transaction (message) flags # FLB_ - per
branch flags #!define FLT_NATS 5 #!define FLB_NATB 6 #!define
FLB_NATSIPPING 7 #!define FLB_RTPWS 8 #!define FLB_IPV6 9 #!define
FLB_V4V6 10 #!define FLB_BRIDGE 11 ####### Global Parameters
######### ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG debug=4 log_stderror=no #!else debug=2
log_stderror=no #!endif memdbg=5 memlog=5 log_facility=LOG_LOCAL0
fork=yes children=4 port=MY_SIP_PORT tls_port_no=MY_SIPS_PORT
#!ifdef WITH_TLS enable_tls=yes #!endif listen=MY_IP4_ADDR #!ifdef
WITH_LOCALHOST_SIP listen=IP4_LOCALHOST #!endif #!ifdef WITH_IPV6
listen=MY_IP6_ADDR #!ifdef WITH_LOCALHOST_SIP listen=IP6_LOCALHOST
#!endif #!endif #!ifdef WITH_WEBSOCKETS listen=MY_WS4_ADDR #!ifdef
WITH_LOCALHOST_WS listen=LOCALHOST_WS4_ADDR #!endif #!ifdef
WITH_IPV6 listen=MY_WS6_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WS6_ADDR #!endif #!endif #!ifdef WITH_TLS
listen=MY_WSS4_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS4_ADDR #!endif #!ifdef WITH_IPV6
listen=MY_WSS6_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS6_ADDR #!endif #!endif #!endif #!endif
use_dns_cache = on # Use KAMAILIO internal DNS cache
use_dns_failover = on # Depends on KAMAILIO internal DNS cache
dns_srv_loadbalancing = on # dns_try_naptr = on # dns_retr_time=1
# Time in seconds before retrying a DNS request dns_retr_no=3 #
Number of DNS retransmissions before giving up # Set protocol
preference order - ignore target priority dns_naptr_ignore_rfc=
yes # Ignore target NAPTR priority dns_tls_pref=50 # First
priority: TLS dns_tcp_pref=30 # Second priority: TCP
dns_udp_pref=10 # Third priority: UDP tcp_connection_lifetime=3604
tcp_accept_no_cl=yes tcp_rd_buf_size=16384 # set paths to location
of modules (to sources or installation folders) #!ifdef
WITH_SRCPATH mpath="modules/" #!else
mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" #!endif
#!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule
"kex.so" loadmodule "corex.so" loadmodule "tm.so"
loadmodule
"tmx.so" loadmodule "sl.so" loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule
"registrar.so" loadmodule "textops.so" loadmodule
"siputils.so"
loadmodule "xlog.so" loadmodule "sanity.so" loadmodule
"ctl.so"
loadmodule "cfg_rpc.so" loadmodule "sdpops.so" loadmodule
"textopsx.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule
"auth_db.so" #!ifdef WITH_IPAUTH loadmodule "permissions.so"
#!endif #!endif #!ifdef WITH_PRESENCE loadmodule "presence.so"
loadmodule "presence_xml.so" #!endif #!ifdef WITH_TLS loadmodule
"tls.so" #!endif #!ifdef WITH_HOMER loadmodule "siptrace.so"
#!endif #!ifdef WITH_WEBSOCKETS loadmodule "xhttp.so" loadmodule
"websocket.so" loadmodule "nathelper.so" loadmodule
"rtpengine.so"
#!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so" loadmodule
"pike.so" #!endif #!ifdef WITH_DEBUG loadmodule "debugger.so"
#!endif # ----------------- setting module-specific parameters
--------------- # ----- rr params ----- # add value to ;lr param
to cope with most of the UAs modparam("rr", "enable_full_lr", 1)
#
do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0) # ----- registrar params
-----
modparam("registrar", "method_filtering", 1) # max value for
expires of registrations modparam("registrar", "max_expires",
3600) # ----- usrloc params ----- /* enable DB persistency for
location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc",
"db_url", DBURL) modparam("usrloc", "db_mode", 2)
#!endif # -----
auth_db params ----- #!ifdef WITH_AUTH modparam("auth_db",
"db_url", DBURL) modparam("auth_db", "calculate_ha1",
1)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "") #!endif
#!ifdef
WITH_PRESENCE # ----- presence params ----- modparam("presence",
"db_url", DBURL) # ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml",
"force_active", 1) #!endif ##!ifdef WITH_NAT # ----- rtpproxy
params ----- modparam("rtpengine", "rtpengine_sock",
"udp:127.0.0.1:22222 <http://127.0.0.1:22222>")
modparam("rtpengine", "extra_id_pv", "$avp(extra_id)")
# -----
nathelper params ----- modparam("nathelper",
"natping_interval",
30) modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from",
"sip:pinger@XXXX-XXXX")
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB) ##!endif # -----
corex
params ----- modparam("corex", "alias_subdomains",
"MY_DOMAIN")
#!ifdef WITH_TLS # ----- tls params ----- modparam("tls",
"config", "/etc/kamailio/tls.cfg") modparam("tls",
"tls_force_run", 1) #!endif #!ifdef WITH_WEBSOCKETS
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
#!endif #!ifdef WITH_HOMER #Siptrace modparam("siptrace",
"duplicate_uri", "sip:127.0.0.1:9060
<http://127.0.0.1:9060>")
modparam("siptrace", "hep_mode_on", 1)
modparam("siptrace",
"trace_to_database", 0) modparam("siptrace",
"trace_flag", 22)
modparam("siptrace", "trace_on", 1) #!endif #!ifdef
WITH_ANTIFLOOD
# ----- pike params ----- modparam("pike",
"sampling_time_unit",
2) modparam("pike", "reqs_density_per_unit", 16)
modparam("pike",
"remove_latency", 4) # ----- htable params ----- # ip ban htable
with autoexpire after 5 minutes modparam("htable", "htable",
"ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_DEBUG #
----- debugger params ----- modparam("debugger", "cfgtrace", 1)
#!endif ####### Routing Logic ######## request_route { #!ifdef
WITH_HOMER # start duplicate the SIP message here sip_trace();
setflag(22); #!endif # per request initial checks route(REQINIT);
xlog("L_INFO", "START: $rm from $fu (IP:$si:$sp)\n"); #!ifdef
WITH_WEBSOCKETS if (nat_uac_test(64)) { # Do NAT traversal stuff
for requests from a WebSocket # connection - even if it is not
behind a NAT! # This won't be needed in the future if Kamailio and
the # WebSocket client support Outbound and Path. force_rport();
if (is_method("REGISTER")) { fix_nated_register(); } else if
(!add_contact_alias()) { xlog("L_ERR", "Error aliasing contact
<$ct>\n"); sl_send_reply("400", "Bad Request"); exit;
} } #!endif
# NAT detection route(NATDETECT); # CANCEL processing if
(is_method("CANCEL")) { if (t_check_trans()) { route(RELAY); }
exit; } # handle requests within SIP dialogs route(WITHINDLG); ###
only initial requests (no To tag) t_check_trans(); #
authentication route(AUTH); # record routing for dialog forming
requests (in case they are routed) # - remove preloaded route
headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE"))
{
record_route(); } # dispatch requests to foreign domains
route(SIPOUT); ### requests for my local domains # handle presence
related requests route(PRESENCE); # handle registrations
route(REGISTRAR); if ($rU == $null) { # request with no Username
in RURI sl_send_reply("484","Address Incomplete"); exit; } #
user
location service route(LOCATION); } # Wrapper for relaying
requests route[RELAY] { # enable additional event routes for
forwarded requests # - serial forking, RTP relaying handling,
a.s.o. if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if
(!t_is_set("branch_route")) { t_on_branch("MANAGE_BRANCH"); } }
if
(is_method("INVITE|SUBSCRIBE|UPDATE")) { if
(!t_is_set("onreply_route")) { t_on_reply("MANAGE_REPLY"); } }
if
(is_method("INVITE")) { if (!t_is_set("failure_route")) {
t_on_failure("MANAGE_FAILURE"); } } if (!t_relay()) {
sl_reply_error(); } exit; } # Per SIP request initial checks
route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same
IP and traffic ban for a while # be sure you exclude checking
trusted peers, such as pstn gateways # - local host excluded
(e.g., loop to self) if (src_ip != myself) { if ($sht(ipban=>$si)
!= $null) { # ip is already blocked xdbg("request from blocked IP
- $rm from $fu (IP:$si:$sp)\n"); exit; } if (!pike_check_req()) {
xlog("L_ALERT","ALERT: pike blocking $rm from $fu
(IP:$si:$sp)\n"); $sht(ipban=>$si) = 1; exit; } } #!endif if
(!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too
Many
Hops"); exit; } if (!sanity_check("1511", "7")) {
xlog("Malformed
SIP message from $si:$sp\n"); exit; } } # Handle requests within
SIP dialogs route[WITHINDLG] { if (has_totag()) { # sequential
request withing a dialog should # take the path determined by
record-routing if (loose_route()) { #!ifdef WITH_WEBSOCKETS if
($du == "") { if (!handle_ruri_alias()) { xlog("L_ERR", "Bad
alias
<$ru>\n"); sl_send_reply("400", "Bad Request"); exit;
} } #!endif
route(DLGURI); if (is_method("ACK")) { # ACK is forwarded
statelessy route(NATMANAGE); } else if (is_method("NOTIFY")) { #
Add Record-Route for in-dialog NOTIFY as per RFC 6665.
record_route(); } route(RELAY); } else { if
(is_method("SUBSCRIBE") && uri == myself) { # in-dialog subscribe
requests route(PRESENCE); exit; } if (is_method("ACK")) { if
(t_check_trans()) { # no loose-route, but stateful ACK; # must be
an ACK after a 487 # or e.g. 404 from upstream server
route(RELAY); exit; } else { # ACK without matching transaction
... ignore and discard exit; } } sl_send_reply("404","Not
here");
} exit; } } # Handle SIP registrations route[REGISTRAR] { if
(is_method("REGISTER")) { if (isflagset(FLT_NATS)) {
setbflag(FLB_NATB); # uncomment next line to do SIP NAT pinging ##
setbflag(FLB_NATSIPPING); } #!ifdef WITH_IPV6 if (af == INET6) {
setbflag(FLB_IPV6); } #!endif if (!save("location")) {
sl_reply_error(); } exit; } } # USER location service
route[LOCATION] { if (!lookup("location")) { $var(rc) = $rc;
t_newtran(); switch ($var(rc)) { case -1: case -3:
send_reply("404", "Not Found"); exit; case -2:
send_reply("405",
"Method Not Allowed"); exit; } } route(RELAY); exit; } # Presence
server route route[PRESENCE] { if
(!is_method("PUBLISH|SUBSCRIBE")) { return; } if
(is_method("SUBSCRIBE") && $hdr(Event) ==
"message-summary") { #
returns here if no voicemail server is configured
sl_send_reply("404", "No voicemail service"); exit; } #!ifdef
WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; } if
(is_method("PUBLISH")) { handle_publish(); t_release(); } else if
(is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); }
exit; #!endif # if presence enabled, this part will not be
executed if (is_method("PUBLISH") || $rU == $null) {
sl_send_reply("404", "Not here"); exit; } return; } #
Authentication route route[AUTH] { #!ifdef WITH_AUTH if
(is_method("REGISTER") || from_uri == myself) { # authenticate
requests if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0"); exit; } # user authenticated -
remove
auth header if (!is_method("REGISTER|PUBLISH")) {
consume_credentials(); } } # if caller is not local subscriber,
then check if it calls # a local destination, otherwise deny, not
an open relay here if (from_uri != myself && uri != myself) {
sl_send_reply("403","Not relaying"); exit; } #!endif return; }
#
Caller NAT detection route route[NATDETECT] { #!ifdef WITH_IPV6
if(af==INET6) { return; } #!endif force_rport(); if
(nat_uac_test("19")) { if (is_method("REGISTER")) {
fix_nated_register(); } else if (is_first_hop()) {
set_contact_alias(); } setflag(FLT_NATS); } return; } # NAT
handling route[NATMANAGE] { if (is_request()) { if (has_totag()) {
if (check_route_param("nat=yes")) { setbflag(FLB_NATB); } if
(check_route_param("rtp=bridge")) { setbflag(FLB_BRIDGE); } if
(check_route_param("rtp=ws")) { setbflag(FLB_RTPWS); } #!ifdef
WITH_IPV6 if (check_route_param("rtp=v46")) { setbflag(FLB_V4V6);
} #!endif } } if (!isbflagset(FLB_BRIDGE)) { return; } if (
!(isflagset(FLT_NATS) || isbflagset(FLB_NATB) ||
isbflagset(FLB_RTPWS) #!ifdef WITH_IPV6 || isbflagset(FLB_V4V6)
#!endif ) ) { return; } $xavp(r=>$T_branch_idx) = "replace-origin
replace-session-connection"; if (!nat_uac_test("8")) {
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
trust-address"; } if (is_request()) { if (!has_totag()) { if
(!t_is_failure_route()) { $avp(extra_id) = @via[1].branch +
$T_branch_idx; $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) +
" via-branch=extra"; } } } if (is_reply()) { $avp(extra_id) =
@via[2].branch + $T_branch_idx; $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " via-branch=extra"; } #!ifdef WITH_IPV6
if (af == INET && isbflagset(FLB_IPV6)) { # IPv4 --> IPv6
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP6"; } else if (af == INET6 &&
!isbflagset(FLB_IPV6)) { # IPv6 --> IPv4 $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " address-family=IP4"; } #!endif if
(isbflagset(FLB_RTPWS)) { if ($proto =~ "ws") { # web --> SIP
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
rtcp-mux-demux DTLS=off SDES-off ICE=remove RTP/AVP"; } else { #
SIP --> web $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
rtcp-mux-offer generate-mid DTLS=passive SDES-off ICE=force
RTP/SAVPF"; } } else { if ($proto =~ "ws") { # web --> web
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " generate-mid
DTLS=passive SDES-off ICE=force"; } # else { #
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + ""; # } }
xlog("L_INFO", "NATMANAGE branch_id:$T_branch_idx ruri: $ru,
method:$rm, status:$rs, extra_id: $avp(extra_id),
rtpengine_manage: $xavp(r=>$T_branch_idx)\n");
rtpengine_manage($xavp(r=>$T_branch_idx)); if (is_request()) { if
(!has_totag()) { if (t_is_branch_route()) { if
(isbflagset(FLB_NATB)) { add_rr_param(";nat=yes"); } if
(isbflagset(FLB_BRIDGE)) { add_rr_param(";rtp=bridge"); } if
(isbflagset(FLB_RTPWS)) { add_rr_param(";rtp=ws"); } #!ifdef
WITH_IPV6 if (isbflagset(FLB_V4V6)) { add_rr_param(";rtp=v46"); }
#!endif } } } if (is_reply()) { if (isbflagset(FLB_NATB)) { if
(is_first_hop()) { if (af == INET) { set_contact_alias(); } } } }
return; } # URI update for dialog requests route[DLGURI] { if
(!isdsturiset()) { handle_ruri_alias(); } return; } # Routing to
foreign domains route[SIPOUT] { if (!uri == myself) {
append_hf("P-hint: outbound\r\n"); route(RELAY); } }
route[BRIDGING] { if (!has_totag()) { if ($proto =~ "ws" && !($ru
=~ "transport=ws")) { # Coming from WS, NOT to WS
setbflag(FLB_RTPWS); # Need bridging } else if (!($proto =~ "ws")
&& $ru =~ "transport=ws") { # Coming from NOT WS, going to WS
setbflag(FLB_RTPWS); # Need bridging } #!ifdef WITH_IPV6 if (af ==
INET6 && !isbflagset(FLB_IPV6)) { setbflag(FLB_V4V6); } else if(af
== INET && isbflagset(FLB_IPV6)) { setbflag(FLB_V4V6); } #!endif }
} # manage outgoing branches branch_route[MANAGE_BRANCH] {
xlog("L_INFO", "MANAGE_BRANCH: New branch [$T_branch_idx] to
$ru\n"); t_on_branch_failure("rtpengine"); #!ifndef
WITH_BRIDGE_ON_FAIL setbflag(FLB_BRIDGE); #!endif route(BRIDGING);
route(NATMANAGE); } # manage incoming replies
onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if (status
=~ "[12][0-9][0-9]") { route(NATMANAGE); } } # manage failure
routing cases failure_route[MANAGE_FAILURE] { xlog("L_INFO",
"Failure: $rs"); } #!ifdef WITH_WEBSOCKETS onreply_route { if
((($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT) && !(proto == WS ||
proto == WSS))) { xlog("L_WARN", "SIP response received on
$Rp\n"); drop; } if (nat_uac_test(64)) { # Do NAT traversal stuff
for replies to a WebSocket connection # - even if it is not behind
a NAT! # This won't be needed in the future if Kamailio and the #
WebSocket client support Outbound and Path. add_contact_alias(); }
} event_route[tm:branch-failure:rtpengine] { xlog("L_INFO",
"BRANCH FAILED: $sel(via[1].branch) + $T_branch_idx"); #!ifdef
WITH_BRIDGE_ON_FAIL if (!isbflagset(FLB_BRIDGE) &&
t_check_status("415|488")) { t_reuse_branch();
setbflag(FLB_BRIDGE); xlog("L_INFO",
"event_route[branch-failure:rtpengine]: trying again\n");
route(RELAY); } else { $avp(extra_id) = @via[1].branch +
$T_branch_idx; rtpengine_delete("via-branch=extra");
xlog("L_INFO", "event_route[branch-failure:rtpengine]:
failed\n");
} #!else $avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra"); #!endif }
event_route[xhttp:request] { set_reply_close();
set_reply_no_connect(); if ($Rp != MY_WS_PORT #!ifdef WITH_TLS &&
$Rp != MY_WSS_PORT #!endif ) { xlog("L_WARN", "HTTP request
received on $Rp\n"); xhttp_reply("403", "Forbidden",
"", "");
exit; } xlog("L_INFO", "HTTP Request Received\n"); if
($hdr(Upgrade) =~ "websocket" && $hdr(Connection) =~
"Upgrade" &&
$rm =~ "GET" ) { # Validate Host - make sure the client is using
the correct # alias for WebSockets if ($hdr(Host) == $null ||
!is_myself("sip:" + $hdr(Host))) { xlog("L_WARN", "Bad
host
$hdr(Host)\n"); xhttp_reply("403", "Forbidden",
"", ""); exit; } #
Optional... validate Origin - make sure the client is from an #
authorised website. For example, # # if ($hdr(Origin) !=
"https://example.com" <https://example.com> # && $hdr(Origin)
!=
"https://example.com" <https://example.com>) { #
xlog("L_WARN",
"Unauthorised client $hdr(Origin)\n"); # xhttp_reply("403",
"Forbidden", "", ""); # exit; # } # Optional... perform
HTTP
authentication # ws_handle_handshake() exits (no further
configuration file # processing of the request) when complete. if
(ws_handle_handshake()) { # Optional... cache some information
about the # successful connection exit; } } xhttp_reply("404",
"Not Found", "", ""); } event_route[websocket:closed]
{
xlog("L_INFO", "WebSocket connection from $si:$sp has
closed\n");
} #!endif |
Thank.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply
only to the sender!
Edit mailing list options or unsubscribe:
--
*Antony*
satskiy.a(a)gmail.com
+380669197533 <tel:+380669197533>
+48727830247 <tel:+48727830247>
5:53 p.m.
Glad it worked!
On Thu, Apr 25, 2024 at 5:30 PM Tristan Ferreira <t.ferreira(a)telemaque.fr>
wrote:
Hi,
Thank your command helped me to find the problem (typo).
I thougt i used it and had no result but not.
Best regards.
Le 25/04/2024 à 17:18, Antonio a écrit :
anton@intel:/etc/kamailio$ sudo kamailio -c kamailio.cfg
Listening on
udp: 127.0.0.1:5060
udp: 192.168.0.143:5060
udp: 172.17.0.1:5060
udp: 172.18.0.1:5060
tcp: 127.0.0.1:5060
tcp: 192.168.0.143:5060
tcp: 172.17.0.1:5060
tcp: 172.18.0.1:5060
Aliases:
tcp: intel:5060
tcp: localhost:5060
udp: intel:5060
udp: localhost:5060
config file ok, exiting...
Description: Debian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye
On Thu, Apr 25, 2024 at 4:43 PM Tristan Ferreira via sr-users <
sr-users(a)lists.kamailio.org> wrote:
--
*Antony*
satskiy.a(a)gmail.com
Hi,
I am trying to learn Kamailio to set up a SIP/RTP proxy for WebRTC with
FreeSWITCH, and I wanted to use this configuration file template as a
starting point.
(Source: https://github.com/havfo/WEBRTC-to-SIP)
But i have the error : *ERROR: [core/ppcfg.c:275]:
pp_ifdef_level_error(): different number of preprocessor directives: 1 more
#!if[n]def as #!endif*
I don't understand because I checked and everything seems okay with the
if/endif statements to me.
# grep '#!ifndef' kamailio.cfg | wc -l
2
# grep '#!ifdef' kamailio.cfg | wc -l
49
# grep '#!endif' kamailio.cfg | wc -l
51
And it's ok for chat gpt too :
#!ifdef : 49 occurrences
#!ifndef : 2 occurrences
Total (#!ifdef and #!ifndef) : 51 occurrences
#!endif : 51 occurrences
Is there a problem with the parser or a compatibility problem (i am on *5.6.3*) ?
#!KAMAILIO
#
#!define WITH_MYSQL
#!define WITH_AUTH
#!define WITH_USRLOCDB
#!define WITH_TLS
#!define WITH_HOMER
#!define WITH_WEBSOCKETS
#!define WITH_ANTIFLOOD
#!define WITH_IPV6
##!define WITH_BRIDGE_ON_FAIL
#!define WITH_LOCALHOST_WS
##!define WITH_LOCALHOST_SIP
#!substdef "!MY_SIP_PORT!5060!g"
#!substdef "!MY_SIPS_PORT!5061!g"
#!substdef "!MY_WS_PORT!8080!g"
#!substdef "!MY_WSS_PORT!4443!g"
#!substdef "!MY_IP4_ADDR!XXXXX-XXXXX!g"
#!substdef "!IP4_LOCALHOST!127.0.0.1!g"
#!substdef "!MY_WS4_ADDR!tcp:MY_IP4_ADDR:MY_WS_PORT!g"
#!substdef "!MY_WSS4_ADDR!tls:MY_IP4_ADDR:MY_WSS_PORT!g"
#!substdef "!LOCALHOST_WS4_ADDR!tcp:IP4_LOCALHOST:MY_WS_PORT!g"
#!substdef "!LOCALHOST_WSS4_ADDR!tls:IP4_LOCALHOST:MY_WSS_PORT!g"
#!ifdef WITH_IPV6
#!substdef "!MY_IP6_ADDR![XXXXXX-XXXXXX]!g"
#!substdef "!IP6_LOCALHOST![::1]!g"
#!substdef "!MY_WS6_ADDR!tcp:MY_IP6_ADDR:MY_WS_PORT!g"
#!substdef "!MY_WSS6_ADDR!tls:MY_IP6_ADDR:MY_WSS_PORT!g"
#!substdef "!LOCALHOST_WS6_ADDR!tcp:IP6_LOCALHOST:MY_WS_PORT!g"
#!substdef "!LOCALHOST_WSS6_ADDR!tls:IP6_LOCALHOST:MY_WSS_PORT!g"
#!endif
#!substdef "!MY_DOMAIN!XXXX-XXXX!g"
# *** Value defines - IDs used later in config
#!ifdef WITH_MYSQL
# - database URL - used to connect to database server by modules such
# as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL
#!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio"
#!endif
#!endif
# - flags
# FLT_ - per transaction (message) flags
# FLB_ - per branch flags
#!define FLT_NATS 5
#!define FLB_NATB 6
#!define FLB_NATSIPPING 7
#!define FLB_RTPWS 8
#!define FLB_IPV6 9
#!define FLB_V4V6 10
#!define FLB_BRIDGE 11
####### Global Parameters #########
### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR
#!ifdef WITH_DEBUG
debug=4
log_stderror=no
#!else
debug=2
log_stderror=no
#!endif
memdbg=5
memlog=5
log_facility=LOG_LOCAL0
fork=yes
children=4
port=MY_SIP_PORT
tls_port_no=MY_SIPS_PORT
#!ifdef WITH_TLS
enable_tls=yes
#!endif
listen=MY_IP4_ADDR
#!ifdef WITH_LOCALHOST_SIP
listen=IP4_LOCALHOST
#!endif
#!ifdef WITH_IPV6
listen=MY_IP6_ADDR
#!ifdef WITH_LOCALHOST_SIP
listen=IP6_LOCALHOST
#!endif
#!endif
#!ifdef WITH_WEBSOCKETS
listen=MY_WS4_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WS4_ADDR
#!endif
#!ifdef WITH_IPV6
listen=MY_WS6_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WS6_ADDR
#!endif
#!endif
#!ifdef WITH_TLS
listen=MY_WSS4_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS4_ADDR
#!endif
#!ifdef WITH_IPV6
listen=MY_WSS6_ADDR
#!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS6_ADDR
#!endif
#!endif
#!endif
#!endif
use_dns_cache = on # Use KAMAILIO internal DNS cache
use_dns_failover = on # Depends on KAMAILIO internal DNS cache
dns_srv_loadbalancing = on #
dns_try_naptr = on #
dns_retr_time=1 # Time in seconds before retrying a DNS request
dns_retr_no=3 # Number of DNS retransmissions before giving up
# Set protocol preference order - ignore target priority
dns_naptr_ignore_rfc= yes # Ignore target NAPTR priority
dns_tls_pref=50 # First priority: TLS
dns_tcp_pref=30 # Second priority: TCP
dns_udp_pref=10 # Third priority: UDP
tcp_connection_lifetime=3604
tcp_accept_no_cl=yes
tcp_rd_buf_size=16384
# set paths to location of modules (to sources or installation folders)
#!ifdef WITH_SRCPATH
mpath="modules/"
#!else
mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/"
#!endif
#!ifdef WITH_MYSQL
loadmodule "db_mysql.so"
#!endif
loadmodule "kex.so"
loadmodule "corex.so"
loadmodule "tm.so"
loadmodule "tmx.so"
loadmodule "sl.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "sanity.so"
loadmodule "ctl.so"
loadmodule "cfg_rpc.so"
loadmodule "sdpops.so"
loadmodule "textopsx.so"
#!ifdef WITH_AUTH
loadmodule "auth.so"
loadmodule "auth_db.so"
#!ifdef WITH_IPAUTH
loadmodule "permissions.so"
#!endif
#!endif
#!ifdef WITH_PRESENCE
loadmodule "presence.so"
loadmodule "presence_xml.so"
#!endif
#!ifdef WITH_TLS
loadmodule "tls.so"
#!endif
#!ifdef WITH_HOMER
loadmodule "siptrace.so"
#!endif
#!ifdef WITH_WEBSOCKETS
loadmodule "xhttp.so"
loadmodule "websocket.so"
loadmodule "nathelper.so"
loadmodule "rtpengine.so"
#!endif
#!ifdef WITH_ANTIFLOOD
loadmodule "htable.so"
loadmodule "pike.so"
#!endif
#!ifdef WITH_DEBUG
loadmodule "debugger.so"
#!endif
# ----------------- setting module-specific parameters ---------------
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- registrar params -----
modparam("registrar", "method_filtering", 1)
# max value for expires of registrations
modparam("registrar", "max_expires", 3600)
# ----- usrloc params -----
/* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
#!endif
# ----- auth_db params -----
#!ifdef WITH_AUTH
modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "load_credentials", "")
#!endif
#!ifdef WITH_PRESENCE
# ----- presence params -----
modparam("presence", "db_url", DBURL)
# ----- presence_xml params -----
modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1)
#!endif
##!ifdef WITH_NAT
# ----- rtpproxy params -----
modparam("rtpengine", "rtpengine_sock",
"udp:127.0.0.1:22222")
modparam("rtpengine", "extra_id_pv", "$avp(extra_id)")
# ----- nathelper params -----
modparam("nathelper", "natping_interval", 30)
modparam("nathelper", "ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from",
"sip:pinger@XXXX-XXXX")
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB)
##!endif
# ----- corex params -----
modparam("corex", "alias_subdomains", "MY_DOMAIN")
#!ifdef WITH_TLS
# ----- tls params -----
modparam("tls", "config", "/etc/kamailio/tls.cfg")
modparam("tls", "tls_force_run", 1)
#!endif
#!ifdef WITH_WEBSOCKETS
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
#!endif
#!ifdef WITH_HOMER
#Siptrace
modparam("siptrace", "duplicate_uri",
"sip:127.0.0.1:9060")
modparam("siptrace", "hep_mode_on", 1)
modparam("siptrace", "trace_to_database", 0)
modparam("siptrace", "trace_flag", 22)
modparam("siptrace", "trace_on", 1)
#!endif
#!ifdef WITH_ANTIFLOOD
# ----- pike params -----
modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike", "remove_latency", 4)
# ----- htable params -----
# ip ban htable with autoexpire after 5 minutes
modparam("htable", "htable",
"ipban=>size=8;autoexpire=300;")
#!endif
#!ifdef WITH_DEBUG
# ----- debugger params -----
modparam("debugger", "cfgtrace", 1)
#!endif
####### Routing Logic ########
request_route {
#!ifdef WITH_HOMER
# start duplicate the SIP message here
sip_trace();
setflag(22);
#!endif
# per request initial checks
route(REQINIT);
xlog("L_INFO", "START: $rm from $fu (IP:$si:$sp)\n");
#!ifdef WITH_WEBSOCKETS
if (nat_uac_test(64)) {
# Do NAT traversal stuff for requests from a WebSocket
# connection - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
force_rport();
if (is_method("REGISTER")) {
fix_nated_register();
} else if (!add_contact_alias()) {
xlog("L_ERR", "Error aliasing contact <$ct>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
#!endif
# NAT detection
route(NATDETECT);
# CANCEL processing
if (is_method("CANCEL")) {
if (t_check_trans()) {
route(RELAY);
}
exit;
}
# handle requests within SIP dialogs
route(WITHINDLG);
### only initial requests (no To tag)
t_check_trans();
# authentication
route(AUTH);
# record routing for dialog forming requests (in case they are routed)
# - remove preloaded route headers
remove_hf("Route");
if (is_method("INVITE|SUBSCRIBE")) {
record_route();
}
# dispatch requests to foreign domains
route(SIPOUT);
### requests for my local domains
# handle presence related requests
route(PRESENCE);
# handle registrations
route(REGISTRAR);
if ($rU == $null) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# user location service
route(LOCATION);
}
# Wrapper for relaying requests
route[RELAY] {
# enable additional event routes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o.
if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) {
if (!t_is_set("branch_route")) {
t_on_branch("MANAGE_BRANCH");
}
}
if (is_method("INVITE|SUBSCRIBE|UPDATE")) {
if (!t_is_set("onreply_route")) {
t_on_reply("MANAGE_REPLY");
}
}
if (is_method("INVITE")) {
if (!t_is_set("failure_route")) {
t_on_failure("MANAGE_FAILURE");
}
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Per SIP request initial checks
route[REQINIT] {
#!ifdef WITH_ANTIFLOOD
# flood dection from same IP and traffic ban for a while
# be sure you exclude checking trusted peers, such as pstn gateways
# - local host excluded (e.g., loop to self)
if (src_ip != myself) {
if ($sht(ipban=>$si) != $null) {
# ip is already blocked
xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n");
exit;
}
if (!pike_check_req()) {
xlog("L_ALERT","ALERT: pike blocking $rm from $fu
(IP:$si:$sp)\n");
$sht(ipban=>$si) = 1;
exit;
}
}
#!endif
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
if (!sanity_check("1511", "7")) {
xlog("Malformed SIP message from $si:$sp\n");
exit;
}
}
# Handle requests within SIP dialogs
route[WITHINDLG] {
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
#!ifdef WITH_WEBSOCKETS
if ($du == "") {
if (!handle_ruri_alias()) {
xlog("L_ERR", "Bad alias <$ru>\n");
sl_send_reply("400", "Bad Request");
exit;
}
}
#!endif
route(DLGURI);
if (is_method("ACK")) {
# ACK is forwarded statelessy
route(NATMANAGE);
} else if (is_method("NOTIFY")) {
# Add Record-Route for in-dialog NOTIFY as per RFC 6665.
record_route();
}
route(RELAY);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(PRESENCE);
exit;
}
if (is_method("ACK")) {
if (t_check_trans()) {
# no loose-route, but stateful ACK;
# must be an ACK after a 487
# or e.g. 404 from upstream server
route(RELAY);
exit;
} else {
# ACK without matching transaction ... ignore and discard
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
}
# Handle SIP registrations
route[REGISTRAR] {
if (is_method("REGISTER")) {
if (isflagset(FLT_NATS)) {
setbflag(FLB_NATB);
# uncomment next line to do SIP NAT pinging
## setbflag(FLB_NATSIPPING);
}
#!ifdef WITH_IPV6
if (af == INET6) {
setbflag(FLB_IPV6);
}
#!endif
if (!save("location")) {
sl_reply_error();
}
exit;
}
}
# USER location service
route[LOCATION] {
if (!lookup("location")) {
$var(rc) = $rc;
t_newtran();
switch ($var(rc)) {
case -1:
case -3:
send_reply("404", "Not Found");
exit;
case -2:
send_reply("405", "Method Not Allowed");
exit;
}
}
route(RELAY);
exit;
}
# Presence server route
route[PRESENCE] {
if (!is_method("PUBLISH|SUBSCRIBE")) {
return;
}
if (is_method("SUBSCRIBE") && $hdr(Event) ==
"message-summary") {
# returns here if no voicemail server is configured
sl_send_reply("404", "No voicemail service");
exit;
}
#!ifdef WITH_PRESENCE
if (!t_newtran()) {
sl_reply_error();
exit;
}
if (is_method("PUBLISH")) {
handle_publish();
t_release();
} else if (is_method("SUBSCRIBE")) {
handle_subscribe();
t_release();
}
exit;
#!endif
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU == $null) {
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Authentication route
route[AUTH] {
#!ifdef WITH_AUTH
if (is_method("REGISTER") || from_uri == myself) {
# authenticate requests
if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0");
exit;
}
# user authenticated - remove auth header
if (!is_method("REGISTER|PUBLISH")) {
consume_credentials();
}
}
# if caller is not local subscriber, then check if it calls
# a local destination, otherwise deny, not an open relay here
if (from_uri != myself && uri != myself) {
sl_send_reply("403","Not relaying");
exit;
}
#!endif
return;
}
# Caller NAT detection route
route[NATDETECT] {
#!ifdef WITH_IPV6
if(af==INET6) {
return;
}
#!endif
force_rport();
if (nat_uac_test("19")) {
if (is_method("REGISTER")) {
fix_nated_register();
} else if (is_first_hop()) {
set_contact_alias();
}
setflag(FLT_NATS);
}
return;
}
# NAT handling
route[NATMANAGE] {
if (is_request()) {
if (has_totag()) {
if (check_route_param("nat=yes")) {
setbflag(FLB_NATB);
}
if (check_route_param("rtp=bridge")) {
setbflag(FLB_BRIDGE);
}
if (check_route_param("rtp=ws")) {
setbflag(FLB_RTPWS);
}
#!ifdef WITH_IPV6
if (check_route_param("rtp=v46")) {
setbflag(FLB_V4V6);
}
#!endif
}
}
if (!isbflagset(FLB_BRIDGE)) {
return;
}
if (
!(isflagset(FLT_NATS)
|| isbflagset(FLB_NATB)
|| isbflagset(FLB_RTPWS)
#!ifdef WITH_IPV6
|| isbflagset(FLB_V4V6)
#!endif
)
) {
return;
}
$xavp(r=>$T_branch_idx) = "replace-origin replace-session-connection";
if (!nat_uac_test("8")) {
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " trust-address";
}
if (is_request()) {
if (!has_totag()) {
if (!t_is_failure_route()) {
$avp(extra_id) = @via[1].branch + $T_branch_idx;
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
via-branch=extra";
}
}
}
if (is_reply()) {
$avp(extra_id) = @via[2].branch + $T_branch_idx;
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
via-branch=extra";
}
#!ifdef WITH_IPV6
if (af == INET && isbflagset(FLB_IPV6)) { # IPv4 --> IPv6
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP6";
} else if (af == INET6 && !isbflagset(FLB_IPV6)) { # IPv6 --> IPv4
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP4";
}
#!endif
if (isbflagset(FLB_RTPWS)) {
if ($proto =~ "ws") { # web --> SIP
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-demux
DTLS=off SDES-off ICE=remove RTP/AVP";
} else { # SIP --> web
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " rtcp-mux-offer
generate-mid DTLS=passive SDES-off ICE=force RTP/SAVPF";
}
} else {
if ($proto =~ "ws") { # web --> web
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + " generate-mid
DTLS=passive SDES-off ICE=force";
}
# else {
# $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "";
# }
}
xlog("L_INFO", "NATMANAGE branch_id:$T_branch_idx ruri: $ru, method:$rm,
status:$rs, extra_id: $avp(extra_id), rtpengine_manage:
$xavp(r=>$T_branch_idx)\n");
rtpengine_manage($xavp(r=>$T_branch_idx));
if (is_request()) {
if (!has_totag()) {
if (t_is_branch_route()) {
if (isbflagset(FLB_NATB)) {
add_rr_param(";nat=yes");
}
if (isbflagset(FLB_BRIDGE)) {
add_rr_param(";rtp=bridge");
}
if (isbflagset(FLB_RTPWS)) {
add_rr_param(";rtp=ws");
}
#!ifdef WITH_IPV6
if (isbflagset(FLB_V4V6)) {
add_rr_param(";rtp=v46");
}
#!endif
}
}
}
if (is_reply()) {
if (isbflagset(FLB_NATB)) {
if (is_first_hop()) {
if (af == INET) {
set_contact_alias();
}
}
}
}
return;
}
# URI update for dialog requests
route[DLGURI] {
if (!isdsturiset()) {
handle_ruri_alias();
}
return;
}
# Routing to foreign domains
route[SIPOUT] {
if (!uri == myself) {
append_hf("P-hint: outbound\r\n");
route(RELAY);
}
}
route[BRIDGING] {
if (!has_totag()) {
if ($proto =~ "ws" && !($ru =~ "transport=ws")) { # Coming
from WS, NOT to WS
setbflag(FLB_RTPWS); # Need bridging
} else if (!($proto =~ "ws") && $ru =~ "transport=ws") { #
Coming from NOT WS, going to WS
setbflag(FLB_RTPWS); # Need bridging
}
#!ifdef WITH_IPV6
if (af == INET6 && !isbflagset(FLB_IPV6)) {
setbflag(FLB_V4V6);
} else if(af == INET && isbflagset(FLB_IPV6)) {
setbflag(FLB_V4V6);
}
#!endif
}
}
# manage outgoing branches
branch_route[MANAGE_BRANCH] {
xlog("L_INFO", "MANAGE_BRANCH: New branch [$T_branch_idx] to
$ru\n");
t_on_branch_failure("rtpengine");
#!ifndef WITH_BRIDGE_ON_FAIL
setbflag(FLB_BRIDGE);
#!endif
route(BRIDGING);
route(NATMANAGE);
}
# manage incoming replies
onreply_route[MANAGE_REPLY] {
xdbg("incoming reply\n");
if (status =~ "[12][0-9][0-9]") {
route(NATMANAGE);
}
}
# manage failure routing cases
failure_route[MANAGE_FAILURE] {
xlog("L_INFO", "Failure: $rs");
}
#!ifdef WITH_WEBSOCKETS
onreply_route {
if ((($Rp == MY_WS_PORT || $Rp == MY_WSS_PORT) && !(proto == WS || proto ==
WSS))) {
xlog("L_WARN", "SIP response received on $Rp\n");
drop;
}
if (nat_uac_test(64)) {
# Do NAT traversal stuff for replies to a WebSocket connection
# - even if it is not behind a NAT!
# This won't be needed in the future if Kamailio and the
# WebSocket client support Outbound and Path.
add_contact_alias();
}
}
event_route[tm:branch-failure:rtpengine] {
xlog("L_INFO", "BRANCH FAILED: $sel(via[1].branch) +
$T_branch_idx");
#!ifdef WITH_BRIDGE_ON_FAIL
if (!isbflagset(FLB_BRIDGE) && t_check_status("415|488")) {
t_reuse_branch();
setbflag(FLB_BRIDGE);
xlog("L_INFO", "event_route[branch-failure:rtpengine]: trying
again\n");
route(RELAY);
} else {
$avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra");
xlog("L_INFO", "event_route[branch-failure:rtpengine]:
failed\n");
}
#!else
$avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra");
#!endif
}
event_route[xhttp:request] {
set_reply_close();
set_reply_no_connect();
if ($Rp != MY_WS_PORT
#!ifdef WITH_TLS
&& $Rp != MY_WSS_PORT
#!endif
) {
xlog("L_WARN", "HTTP request received on $Rp\n");
xhttp_reply("403", "Forbidden", "", "");
exit;
}
xlog("L_INFO", "HTTP Request Received\n");
if ($hdr(Upgrade) =~ "websocket"
&& $hdr(Connection) =~ "Upgrade"
&& $rm =~ "GET"
) {
# Validate Host - make sure the client is using the correct
# alias for WebSockets
if ($hdr(Host) == $null || !is_myself("sip:" + $hdr(Host))) {
xlog("L_WARN", "Bad host $hdr(Host)\n");
xhttp_reply("403", "Forbidden", "", "");
exit;
}
# Optional... validate Origin - make sure the client is from an
# authorised website. For example,
#
# if ($hdr(Origin) != "https://example.com" <https://example.com>
# && $hdr(Origin) != "https://example.com"
<https://example.com>) {
# xlog("L_WARN", "Unauthorised client $hdr(Origin)\n");
# xhttp_reply("403", "Forbidden", "", "");
# exit;
# }
# Optional... perform HTTP authentication
# ws_handle_handshake() exits (no further configuration file
# processing of the request) when complete.
if (ws_handle_handshake()) {
# Optional... cache some information about the
# successful connection
exit;
}
}
xhttp_reply("404", "Not Found", "", "");
}
event_route[websocket:closed] {
xlog("L_INFO", "WebSocket connection from $si:$sp has
closed\n");
}
#!endif
Thank.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
--
*Antony*
satskiy.a(a)gmail.com
+380669197533
+48727830247
26 Apr
26 Apr
9:25 a.m.
Hello,
can you add an extra EoL at the end of the file and try again? iirc, at
some point there was an issue counting the #!endif at the end of the
file if it was not followed by a new line. I think that was fixed.
Also, kamailio has a cli parameter to print the config after evaluating
pre-processor directive, you can use it to see if the result is what you
expect to be active in kamailio.cfg
Cheers,
Daniel
On 25.04.24 15:47, Tristan Ferreira via sr-users wrote:
Hi,
I am trying to learn Kamailio to set up a SIP/RTP proxy for WebRTC
with FreeSWITCH, and I wanted to use this configuration file template
as a starting point.
(Source: https://github.com/havfo/WEBRTC-to-SIP)
But i have the error : *ERROR: [core/ppcfg.c:275]:
pp_ifdef_level_error(): different number of preprocessor directives: 1
more #!if[n]def as #!endif*
I don't understand because I checked and everything seems okay with
the if/endif statements to me.
|# grep '#!ifndef' kamailio.cfg | wc -l 2 # grep '#!ifdef'
kamailio.cfg | wc -l 49 # grep '#!endif' kamailio.cfg | wc -l 51 |
And it's ok for chat gpt too :
|#!ifdef : 49 occurrences #!ifndef : 2 occurrences Total (#!ifdef and
#!ifndef) : 51 occurrences #!endif : 51 occurrences |
Is there a problem with the parser or a compatibility problem (i am on *5.6.3*) ?
|#!KAMAILIO # #!define WITH_MYSQL #!define WITH_AUTH #!define
WITH_USRLOCDB #!define WITH_TLS #!define WITH_HOMER #!define
WITH_WEBSOCKETS #!define WITH_ANTIFLOOD #!define WITH_IPV6 ##!define
WITH_BRIDGE_ON_FAIL #!define WITH_LOCALHOST_WS ##!define
WITH_LOCALHOST_SIP #!substdef "!MY_SIP_PORT!5060!g" #!substdef
"!MY_SIPS_PORT!5061!g" #!substdef "!MY_WS_PORT!8080!g" #!substdef
"!MY_WSS_PORT!4443!g" #!substdef "!MY_IP4_ADDR!XXXXX-XXXXX!g"
#!substdef "!IP4_LOCALHOST!127.0.0.1!g" #!substdef
"!MY_WS4_ADDR!tcp:MY_IP4_ADDR:MY_WS_PORT!g" #!substdef
"!MY_WSS4_ADDR!tls:MY_IP4_ADDR:MY_WSS_PORT!g" #!substdef
"!LOCALHOST_WS4_ADDR!tcp:IP4_LOCALHOST:MY_WS_PORT!g" #!substdef
"!LOCALHOST_WSS4_ADDR!tls:IP4_LOCALHOST:MY_WSS_PORT!g" #!ifdef
WITH_IPV6 #!substdef "!MY_IP6_ADDR![XXXXXX-XXXXXX]!g" #!substdef
"!IP6_LOCALHOST![::1]!g" #!substdef
"!MY_WS6_ADDR!tcp:MY_IP6_ADDR:MY_WS_PORT!g" #!substdef
"!MY_WSS6_ADDR!tls:MY_IP6_ADDR:MY_WSS_PORT!g" #!substdef
"!LOCALHOST_WS6_ADDR!tcp:IP6_LOCALHOST:MY_WS_PORT!g" #!substdef
"!LOCALHOST_WSS6_ADDR!tls:IP6_LOCALHOST:MY_WSS_PORT!g" #!endif
#!substdef "!MY_DOMAIN!XXXX-XXXX!g" # *** Value defines - IDs used
later in config #!ifdef WITH_MYSQL # - database URL - used to connect
to database server by modules such # as: auth_db, acc, usrloc, a.s.o.
#!ifndef DBURL #!define DBURL
"mysql://kamailio:kamailiorw@localhost/kamailio" #!endif #!endif # -
flags # FLT_ - per transaction (message) flags # FLB_ - per branch
flags #!define FLT_NATS 5 #!define FLB_NATB 6 #!define FLB_NATSIPPING
7 #!define FLB_RTPWS 8 #!define FLB_IPV6 9 #!define FLB_V4V6 10
#!define FLB_BRIDGE 11 ####### Global Parameters ######### ### LOG
Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR #!ifdef WITH_DEBUG
debug=4 log_stderror=no #!else debug=2 log_stderror=no #!endif
memdbg=5 memlog=5 log_facility=LOG_LOCAL0 fork=yes children=4
port=MY_SIP_PORT tls_port_no=MY_SIPS_PORT #!ifdef WITH_TLS
enable_tls=yes #!endif listen=MY_IP4_ADDR #!ifdef WITH_LOCALHOST_SIP
listen=IP4_LOCALHOST #!endif #!ifdef WITH_IPV6 listen=MY_IP6_ADDR
#!ifdef WITH_LOCALHOST_SIP listen=IP6_LOCALHOST #!endif #!endif
#!ifdef WITH_WEBSOCKETS listen=MY_WS4_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WS4_ADDR #!endif #!ifdef WITH_IPV6 listen=MY_WS6_ADDR
#!ifdef WITH_LOCALHOST_WS listen=LOCALHOST_WS6_ADDR #!endif #!endif
#!ifdef WITH_TLS listen=MY_WSS4_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS4_ADDR #!endif #!ifdef WITH_IPV6
listen=MY_WSS6_ADDR #!ifdef WITH_LOCALHOST_WS
listen=LOCALHOST_WSS6_ADDR #!endif #!endif #!endif #!endif
use_dns_cache = on # Use KAMAILIO internal DNS cache use_dns_failover
= on # Depends on KAMAILIO internal DNS cache dns_srv_loadbalancing =
on # dns_try_naptr = on # dns_retr_time=1 # Time in seconds before
retrying a DNS request dns_retr_no=3 # Number of DNS retransmissions
before giving up # Set protocol preference order - ignore target
priority dns_naptr_ignore_rfc= yes # Ignore target NAPTR priority
dns_tls_pref=50 # First priority: TLS dns_tcp_pref=30 # Second
priority: TCP dns_udp_pref=10 # Third priority: UDP
tcp_connection_lifetime=3604 tcp_accept_no_cl=yes
tcp_rd_buf_size=16384 # set paths to location of modules (to sources
or installation folders) #!ifdef WITH_SRCPATH mpath="modules/" #!else
mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" #!endif #!ifdef
WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "kex.so"
loadmodule "corex.so" loadmodule "tm.so" loadmodule
"tmx.so"
loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so"
loadmodule
"maxfwd.so" loadmodule "usrloc.so" loadmodule
"registrar.so"
loadmodule "textops.so" loadmodule "siputils.so" loadmodule
"xlog.so"
loadmodule "sanity.so" loadmodule "ctl.so" loadmodule
"cfg_rpc.so"
loadmodule "sdpops.so" loadmodule "textopsx.so" #!ifdef WITH_AUTH
loadmodule "auth.so" loadmodule "auth_db.so" #!ifdef WITH_IPAUTH
loadmodule "permissions.so" #!endif #!endif #!ifdef WITH_PRESENCE
loadmodule "presence.so" loadmodule "presence_xml.so" #!endif
#!ifdef
WITH_TLS loadmodule "tls.so" #!endif #!ifdef WITH_HOMER loadmodule
"siptrace.so" #!endif #!ifdef WITH_WEBSOCKETS loadmodule "xhttp.so"
loadmodule "websocket.so" loadmodule "nathelper.so" loadmodule
"rtpengine.so" #!endif #!ifdef WITH_ANTIFLOOD loadmodule "htable.so"
loadmodule "pike.so" #!endif #!ifdef WITH_DEBUG loadmodule
"debugger.so" #!endif # ----------------- setting module-specific
parameters --------------- # ----- rr params ----- # add value to ;lr
param to cope with most of the UAs modparam("rr", "enable_full_lr",
1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0) # ----- registrar params -----
modparam("registrar", "method_filtering", 1) # max value for expires
of registrations modparam("registrar", "max_expires", 3600) # -----
usrloc params ----- /* enable DB persistency for location entries */
#!ifdef WITH_USRLOCDB modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2) #!endif # ----- auth_db params
-----
#!ifdef WITH_AUTH modparam("auth_db", "db_url", DBURL)
modparam("auth_db", "calculate_ha1", 1)
modparam("auth_db",
"password_column", "password") modparam("auth_db",
"load_credentials",
"") #!endif #!ifdef WITH_PRESENCE # ----- presence params -----
modparam("presence", "db_url", DBURL) # ----- presence_xml params
----- modparam("presence_xml", "db_url", DBURL)
modparam("presence_xml", "force_active", 1) #!endif ##!ifdef
WITH_NAT
# ----- rtpproxy params ----- modparam("rtpengine",
"rtpengine_sock",
"udp:127.0.0.1:22222") modparam("rtpengine",
"extra_id_pv",
"$avp(extra_id)") # ----- nathelper params -----
modparam("nathelper",
"natping_interval", 30) modparam("nathelper",
"ping_nated_only", 1)
modparam("nathelper", "sipping_bflag", FLB_NATSIPPING)
modparam("nathelper", "sipping_from",
"sip:pinger@XXXX-XXXX")
modparam("nathelper|registrar", "received_avp",
"$avp(RECEIVED)")
modparam("usrloc", "nat_bflag", FLB_NATB) ##!endif # ----- corex
params ----- modparam("corex", "alias_subdomains",
"MY_DOMAIN")
#!ifdef WITH_TLS # ----- tls params ----- modparam("tls", "config",
"/etc/kamailio/tls.cfg") modparam("tls", "tls_force_run",
1) #!endif
#!ifdef WITH_WEBSOCKETS modparam("nathelper|registrar",
"received_avp", "$avp(RECEIVED)") #!endif #!ifdef WITH_HOMER
#Siptrace
modparam("siptrace", "duplicate_uri",
"sip:127.0.0.1:9060")
modparam("siptrace", "hep_mode_on", 1)
modparam("siptrace",
"trace_to_database", 0) modparam("siptrace", "trace_flag",
22)
modparam("siptrace", "trace_on", 1) #!endif #!ifdef WITH_ANTIFLOOD #
----- pike params ----- modparam("pike", "sampling_time_unit", 2)
modparam("pike", "reqs_density_per_unit", 16)
modparam("pike",
"remove_latency", 4) # ----- htable params ----- # ip ban htable with
autoexpire after 5 minutes modparam("htable", "htable",
"ipban=>size=8;autoexpire=300;") #!endif #!ifdef WITH_DEBUG # -----
debugger params ----- modparam("debugger", "cfgtrace", 1) #!endif
####### Routing Logic ######## request_route { #!ifdef WITH_HOMER #
start duplicate the SIP message here sip_trace(); setflag(22); #!endif
# per request initial checks route(REQINIT); xlog("L_INFO", "START:
$rm from $fu (IP:$si:$sp)\n"); #!ifdef WITH_WEBSOCKETS if
(nat_uac_test(64)) { # Do NAT traversal stuff for requests from a
WebSocket # connection - even if it is not behind a NAT! # This won't
be needed in the future if Kamailio and the # WebSocket client support
Outbound and Path. force_rport(); if (is_method("REGISTER")) {
fix_nated_register(); } else if (!add_contact_alias()) { xlog("L_ERR",
"Error aliasing contact <$ct>\n"); sl_send_reply("400",
"Bad
Request"); exit; } } #!endif # NAT detection route(NATDETECT); #
CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) {
route(RELAY); } exit; } # handle requests within SIP dialogs
route(WITHINDLG); ### only initial requests (no To tag)
t_check_trans(); # authentication route(AUTH); # record routing for
dialog forming requests (in case they are routed) # - remove preloaded
route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE"))
{
record_route(); } # dispatch requests to foreign domains
route(SIPOUT); ### requests for my local domains # handle presence
related requests route(PRESENCE); # handle registrations
route(REGISTRAR); if ($rU == $null) { # request with no Username in
RURI sl_send_reply("484","Address Incomplete"); exit; } # user
location service route(LOCATION); } # Wrapper for relaying requests
route[RELAY] { # enable additional event routes for forwarded requests
# - serial forking, RTP relaying handling, a.s.o. if
(is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { if
(!t_is_set("branch_route")) { t_on_branch("MANAGE_BRANCH"); } } if
(is_method("INVITE|SUBSCRIBE|UPDATE")) { if
(!t_is_set("onreply_route")) { t_on_reply("MANAGE_REPLY"); } } if
(is_method("INVITE")) { if (!t_is_set("failure_route")) {
t_on_failure("MANAGE_FAILURE"); } } if (!t_relay()) {
sl_reply_error(); } exit; } # Per SIP request initial checks
route[REQINIT] { #!ifdef WITH_ANTIFLOOD # flood dection from same IP
and traffic ban for a while # be sure you exclude checking trusted
peers, such as pstn gateways # - local host excluded (e.g., loop to
self) if (src_ip != myself) { if ($sht(ipban=>$si) != $null) { # ip is
already blocked xdbg("request from blocked IP - $rm from $fu
(IP:$si:$sp)\n"); exit; } if (!pike_check_req()) {
xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n");
$sht(ipban=>$si) = 1; exit; } } #!endif if
(!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too
Many
Hops"); exit; } if (!sanity_check("1511", "7")) {
xlog("Malformed SIP
message from $si:$sp\n"); exit; } } # Handle requests within SIP
dialogs route[WITHINDLG] { if (has_totag()) { # sequential request
withing a dialog should # take the path determined by record-routing
if (loose_route()) { #!ifdef WITH_WEBSOCKETS if ($du == "") { if
(!handle_ruri_alias()) { xlog("L_ERR", "Bad alias <$ru>\n");
sl_send_reply("400", "Bad Request"); exit; } } #!endif
route(DLGURI);
if (is_method("ACK")) { # ACK is forwarded statelessy
route(NATMANAGE); } else if (is_method("NOTIFY")) { # Add Record-Route
for in-dialog NOTIFY as per RFC 6665. record_route(); } route(RELAY);
} else { if (is_method("SUBSCRIBE") && uri == myself) { # in-dialog
subscribe requests route(PRESENCE); exit; } if (is_method("ACK")) { if
(t_check_trans()) { # no loose-route, but stateful ACK; # must be an
ACK after a 487 # or e.g. 404 from upstream server route(RELAY); exit;
} else { # ACK without matching transaction ... ignore and discard
exit; } } sl_send_reply("404","Not here"); } exit; } } # Handle SIP
registrations route[REGISTRAR] { if (is_method("REGISTER")) { if
(isflagset(FLT_NATS)) { setbflag(FLB_NATB); # uncomment next line to
do SIP NAT pinging ## setbflag(FLB_NATSIPPING); } #!ifdef WITH_IPV6 if
(af == INET6) { setbflag(FLB_IPV6); } #!endif if (!save("location")) {
sl_reply_error(); } exit; } } # USER location service route[LOCATION]
{ if (!lookup("location")) { $var(rc) = $rc; t_newtran(); switch
($var(rc)) { case -1: case -3: send_reply("404", "Not Found"); exit;
case -2: send_reply("405", "Method Not Allowed"); exit; } }
route(RELAY); exit; } # Presence server route route[PRESENCE] { if
(!is_method("PUBLISH|SUBSCRIBE")) { return; } if
(is_method("SUBSCRIBE") && $hdr(Event) == "message-summary")
{ #
returns here if no voicemail server is configured sl_send_reply("404",
"No voicemail service"); exit; } #!ifdef WITH_PRESENCE if
(!t_newtran()) { sl_reply_error(); exit; } if (is_method("PUBLISH")) {
handle_publish(); t_release(); } else if (is_method("SUBSCRIBE")) {
handle_subscribe(); t_release(); } exit; #!endif # if presence
enabled, this part will not be executed if (is_method("PUBLISH") ||
$rU == $null) { sl_send_reply("404", "Not here"); exit; } return; }
#
Authentication route route[AUTH] { #!ifdef WITH_AUTH if
(is_method("REGISTER") || from_uri == myself) { # authenticate
requests if (!auth_check("$fd", "subscriber", "1")) {
auth_challenge("$fd", "0"); exit; } # user authenticated - remove
auth
header if (!is_method("REGISTER|PUBLISH")) { consume_credentials(); }
} # if caller is not local subscriber, then check if it calls # a
local destination, otherwise deny, not an open relay here if (from_uri
!= myself && uri != myself) { sl_send_reply("403","Not
relaying");
exit; } #!endif return; } # Caller NAT detection route
route[NATDETECT] { #!ifdef WITH_IPV6 if(af==INET6) { return; } #!endif
force_rport(); if (nat_uac_test("19")) { if (is_method("REGISTER"))
{
fix_nated_register(); } else if (is_first_hop()) {
set_contact_alias(); } setflag(FLT_NATS); } return; } # NAT handling
route[NATMANAGE] { if (is_request()) { if (has_totag()) { if
(check_route_param("nat=yes")) { setbflag(FLB_NATB); } if
(check_route_param("rtp=bridge")) { setbflag(FLB_BRIDGE); } if
(check_route_param("rtp=ws")) { setbflag(FLB_RTPWS); } #!ifdef
WITH_IPV6 if (check_route_param("rtp=v46")) { setbflag(FLB_V4V6); }
#!endif } } if (!isbflagset(FLB_BRIDGE)) { return; } if (
!(isflagset(FLT_NATS) || isbflagset(FLB_NATB) || isbflagset(FLB_RTPWS)
#!ifdef WITH_IPV6 || isbflagset(FLB_V4V6) #!endif ) ) { return; }
$xavp(r=>$T_branch_idx) = "replace-origin replace-session-connection";
if (!nat_uac_test("8")) { $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " trust-address"; } if (is_request()) { if
(!has_totag()) { if (!t_is_failure_route()) { $avp(extra_id) =
@via[1].branch + $T_branch_idx; $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " via-branch=extra"; } } } if (is_reply()) {
$avp(extra_id) = @via[2].branch + $T_branch_idx;
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
via-branch=extra"; } #!ifdef WITH_IPV6 if (af == INET &&
isbflagset(FLB_IPV6)) { # IPv4 --> IPv6 $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " address-family=IP6"; } else if (af ==
INET6 && !isbflagset(FLB_IPV6)) { # IPv6 --> IPv4
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
address-family=IP4"; } #!endif if (isbflagset(FLB_RTPWS)) { if ($proto
=~ "ws") { # web --> SIP $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " rtcp-mux-demux DTLS=off SDES-off
ICE=remove RTP/AVP"; } else { # SIP --> web $xavp(r=>$T_branch_idx) =
$xavp(r=>$T_branch_idx) + " rtcp-mux-offer generate-mid DTLS=passive
SDES-off ICE=force RTP/SAVPF"; } } else { if ($proto =~ "ws") { # web
--> web $xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + "
generate-mid DTLS=passive SDES-off ICE=force"; } # else { #
$xavp(r=>$T_branch_idx) = $xavp(r=>$T_branch_idx) + ""; # } }
xlog("L_INFO", "NATMANAGE branch_id:$T_branch_idx ruri: $ru,
method:$rm, status:$rs, extra_id: $avp(extra_id), rtpengine_manage:
$xavp(r=>$T_branch_idx)\n");
rtpengine_manage($xavp(r=>$T_branch_idx)); if (is_request()) { if
(!has_totag()) { if (t_is_branch_route()) { if (isbflagset(FLB_NATB))
{ add_rr_param(";nat=yes"); } if (isbflagset(FLB_BRIDGE)) {
add_rr_param(";rtp=bridge"); } if (isbflagset(FLB_RTPWS)) {
add_rr_param(";rtp=ws"); } #!ifdef WITH_IPV6 if (isbflagset(FLB_V4V6))
{ add_rr_param(";rtp=v46"); } #!endif } } } if (is_reply()) { if
(isbflagset(FLB_NATB)) { if (is_first_hop()) { if (af == INET) {
set_contact_alias(); } } } } return; } # URI update for dialog
requests route[DLGURI] { if (!isdsturiset()) { handle_ruri_alias(); }
return; } # Routing to foreign domains route[SIPOUT] { if (!uri ==
myself) { append_hf("P-hint: outbound\r\n"); route(RELAY); } }
route[BRIDGING] { if (!has_totag()) { if ($proto =~ "ws" && !($ru =~
"transport=ws")) { # Coming from WS, NOT to WS setbflag(FLB_RTPWS); #
Need bridging } else if (!($proto =~ "ws") && $ru =~
"transport=ws") {
# Coming from NOT WS, going to WS setbflag(FLB_RTPWS); # Need bridging
} #!ifdef WITH_IPV6 if (af == INET6 && !isbflagset(FLB_IPV6)) {
setbflag(FLB_V4V6); } else if(af == INET && isbflagset(FLB_IPV6)) {
setbflag(FLB_V4V6); } #!endif } } # manage outgoing branches
branch_route[MANAGE_BRANCH] { xlog("L_INFO", "MANAGE_BRANCH: New
branch [$T_branch_idx] to $ru\n"); t_on_branch_failure("rtpengine");
#!ifndef WITH_BRIDGE_ON_FAIL setbflag(FLB_BRIDGE); #!endif
route(BRIDGING); route(NATMANAGE); } # manage incoming replies
onreply_route[MANAGE_REPLY] { xdbg("incoming reply\n"); if (status =~
"[12][0-9][0-9]") { route(NATMANAGE); } } # manage failure routing
cases failure_route[MANAGE_FAILURE] { xlog("L_INFO", "Failure:
$rs");
} #!ifdef WITH_WEBSOCKETS onreply_route { if ((($Rp == MY_WS_PORT ||
$Rp == MY_WSS_PORT) && !(proto == WS || proto == WSS))) {
xlog("L_WARN", "SIP response received on $Rp\n"); drop; } if
(nat_uac_test(64)) { # Do NAT traversal stuff for replies to a
WebSocket connection # - even if it is not behind a NAT! # This won't
be needed in the future if Kamailio and the # WebSocket client support
Outbound and Path. add_contact_alias(); } }
event_route[tm:branch-failure:rtpengine] { xlog("L_INFO", "BRANCH
FAILED: $sel(via[1].branch) + $T_branch_idx"); #!ifdef
WITH_BRIDGE_ON_FAIL if (!isbflagset(FLB_BRIDGE) &&
t_check_status("415|488")) { t_reuse_branch(); setbflag(FLB_BRIDGE);
xlog("L_INFO", "event_route[branch-failure:rtpengine]: trying
again\n"); route(RELAY); } else { $avp(extra_id) = @via[1].branch +
$T_branch_idx; rtpengine_delete("via-branch=extra"); xlog("L_INFO",
"event_route[branch-failure:rtpengine]: failed\n"); } #!else
$avp(extra_id) = @via[1].branch + $T_branch_idx;
rtpengine_delete("via-branch=extra"); #!endif }
event_route[xhttp:request] { set_reply_close();
set_reply_no_connect(); if ($Rp != MY_WS_PORT #!ifdef WITH_TLS && $Rp
!= MY_WSS_PORT #!endif ) { xlog("L_WARN", "HTTP request received on
$Rp\n"); xhttp_reply("403", "Forbidden", "",
""); exit; }
xlog("L_INFO", "HTTP Request Received\n"); if ($hdr(Upgrade) =~
"websocket" && $hdr(Connection) =~ "Upgrade" && $rm
=~ "GET" ) { #
Validate Host - make sure the client is using the correct # alias for
WebSockets if ($hdr(Host) == $null || !is_myself("sip:" + $hdr(Host)))
{ xlog("L_WARN", "Bad host $hdr(Host)\n");
xhttp_reply("403",
"Forbidden", "", ""); exit; } # Optional... validate Origin
- make
sure the client is from an # authorised website. For example, # # if
($hdr(Origin) != "https://example.com" # && $hdr(Origin) !=
"https://example.com") { # xlog("L_WARN", "Unauthorised client
$hdr(Origin)\n"); # xhttp_reply("403", "Forbidden",
"", ""); # exit; #
} # Optional... perform HTTP authentication # ws_handle_handshake()
exits (no further configuration file # processing of the request) when
complete. if (ws_handle_handshake()) { # Optional... cache some
information about the # successful connection exit; } }
xhttp_reply("404", "Not Found", "", ""); }
event_route[websocket:closed] { xlog("L_INFO", "WebSocket connection
from $si:$sp has closed\n"); } #!endif |
Thank.
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the sender!
Edit mailing list options or unsubscribe:
--
Daniel-Constantin Mierla (@ asipto.com)
twitter.com/miconda -- linkedin.com/in/miconda
Kamailio Consultancy, Training and Development Services -- asipto.com
Kamailio World Conference, April 18-19, 2024, Berlin -- kamailioworld.com
12
days inactive
13
days old
4 comments
3 participants
participants (3)
-
Antonio -
Daniel-Constantin Mierla -
Tristan Ferreira