Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
-----Original Message----- From: Edson [mailto:4lists@gmail.com] Sent: sexta-feira, 14 de setembro de 2007 23:01 To: 'users@openser.org' Subject: Trunk Compile Error 2
I'm trying to compile the trunk version.
After updating I run make distclean and make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp postgres unixodbc" modules install
but after I always get:
make[1]: Leaving directory `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db'
make: *** [modules] Error 2
What is this "Error 2" ? In this same machine I can compile, without a glance, branche 1.2 with this same 'make' command.
Thanks for any help....
Edson
Why not give this a try:
cvs -d:pserver:anonymous@cvs.radiusclient-ng.berlios.de:/cvsroot/radiusclient-ng login cvs -z3 -d:pserver:anonymous@cvs.radiusclient-ng.berlios.de:/cvsroot/radiusclient-ng co radiusclient-ng
Regards, Norm
Edson wrote:
Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
-----Original Message----- From: Edson [mailto:4lists@gmail.com] Sent: sexta-feira, 14 de setembro de 2007 23:01 To: 'users@openser.org' Subject: Trunk Compile Error 2
I'm trying to compile the trunk version.
After updating I run make distclean and make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp postgres unixodbc" modules install
but after I always get:
make[1]: Leaving directory `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db'
make: *** [modules] Error 2
What is this "Error 2" ? In this same machine I can compile, without a glance, branche 1.2 with this same 'make' command.
Thanks for any help....
Edson
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi, Norman...
Thanks for Your response, but I already have radiusclient-ng version 0.5.6 installed...
If radiusclient-ng where not installed, the same 'make' command wouldn't compile branche 1.2. Maybe TRUNK has some diferent requirement... Isn't this version enough?
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 00:20 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Why not give this a try:
cvs -d:pserver:anonymous@cvs.radiusclient-ng.berlios.de:/cvsroot/radiusclient- ng login cvs -z3 -d:pserver:anonymous@cvs.radiusclient-ng.berlios.de:/cvsroot/radiusclient- ng co radiusclient-ng
Regards, Norm
Edson wrote:
Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
-----Original Message----- From: Edson [mailto:4lists@gmail.com] Sent: sexta-feira, 14 de setembro de 2007 23:01 To: 'users@openser.org' Subject: Trunk Compile Error 2
I'm trying to compile the trunk version.
After updating I run make distclean and make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp postgres unixodbc" modules install
but after I always get:
make[1]: Leaving directory `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db'
make: *** [modules] Error 2
What is this "Error 2" ? In this same machine I can compile, without a glance, branche 1.2 with this same 'make' command.
Thanks for any help....
Edson
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi,
1) Are you using: svn co https://openser.svn.sourceforge.net/svnroot/openser/trunk openser
1a) Instead of updating, try downloading the entire distribution into an empty directory.
2) Did you remember to uncomment the setting below in modules/acc/Makefile ? Not positive this is required for auth_radius (because we always uncomment the setting).
# set ENABLE_RADIUS_ACC to true if you wish to enable RADIUS accounting # (uncomment next line or 'ENABLE_RADIUS_ACC=true make all') ENABLE_RADIUS_ACC=true
Norm
Edson wrote:
Hi, Norman...
Thanks for Your response, but I already have radiusclient-ng version 0.5.6 installed...
If radiusclient-ng where not installed, the same 'make' command wouldn't compile branche 1.2. Maybe TRUNK has some diferent requirement... Isn't this version enough?
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 00:20 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Why not give this a try:
cvs -d:pserver:anonymous@cvs.radiusclient-ng.berlios.de:/cvsroot/radiusclient- ng login cvs -z3 -d:pserver:anonymous@cvs.radiusclient-ng.berlios.de:/cvsroot/radiusclient- ng co radiusclient-ng
Regards, Norm
Edson wrote:
Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
-----Original Message----- From: Edson [mailto:4lists@gmail.com] Sent: sexta-feira, 14 de setembro de 2007 23:01 To: 'users@openser.org' Subject: Trunk Compile Error 2
I'm trying to compile the trunk version.
After updating I run make distclean and make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp postgres unixodbc" modules install
but after I always get:
make[1]: Leaving directory `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db'
make: *** [modules] Error 2
What is this "Error 2" ? In this same machine I can compile, without a glance, branche 1.2 with this same 'make' command.
Thanks for any help....
Edson
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hummm... I didn't try a fresh download... That's a good idea... I'll do it tomorrow and let You know the results...
About the 'uncommention', yes, after each update I re-check the main and module/acc Makefiles... just to be sure that everything is ok...
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 01:51 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Hi,
- Are you using: svn co
https://openser.svn.sourceforge.net/svnroot/openser/trunk openser
1a) Instead of updating, try downloading the entire distribution into an empty directory.
- Did you remember to uncomment the setting below in
modules/acc/Makefile ? Not positive this is required for auth_radius (because we always uncomment the setting).
# set ENABLE_RADIUS_ACC to true if you wish to enable RADIUS accounting # (uncomment next line or 'ENABLE_RADIUS_ACC=true make all') ENABLE_RADIUS_ACC=true
Norm
Edson wrote:
Hi, Norman...
Thanks for Your response, but I already have radiusclient-ng version
0.5.6
installed...
If radiusclient-ng where not installed, the same 'make' command wouldn't compile branche 1.2. Maybe TRUNK has some diferent requirement... Isn't
this
version enough?
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 00:20 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Why not give this a try:
cvs -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng login cvs -z3 -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng co radiusclient-ng
Regards, Norm
Edson wrote:
Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
-----Original Message----- From: Edson [mailto:4lists@gmail.com] Sent: sexta-feira, 14 de setembro de 2007 23:01 To: 'users@openser.org' Subject: Trunk Compile Error 2
I'm trying to compile the trunk version.
After updating I run make distclean and make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp postgres unixodbc" modules install
but after I always get:
make[1]: Leaving directory `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db'
make: *** [modules] Error 2
What is this "Error 2" ? In this same machine I can compile, without a glance, branche 1.2 with this same 'make' command.
Thanks for any help....
Edson
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi, Norman...
Just to close this thread: Your first sugestion (a clean download) followed with a 'make distclean' resolve the problem. Thanks for the help.
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 01:51 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Hi,
- Are you using: svn co
https://openser.svn.sourceforge.net/svnroot/openser/trunk openser
1a) Instead of updating, try downloading the entire distribution into an empty directory.
- Did you remember to uncomment the setting below in
modules/acc/Makefile ? Not positive this is required for auth_radius (because we always uncomment the setting).
# set ENABLE_RADIUS_ACC to true if you wish to enable RADIUS accounting # (uncomment next line or 'ENABLE_RADIUS_ACC=true make all') ENABLE_RADIUS_ACC=true
Norm
Edson wrote:
Hi, Norman...
Thanks for Your response, but I already have radiusclient-ng version
0.5.6
installed...
If radiusclient-ng where not installed, the same 'make' command wouldn't compile branche 1.2. Maybe TRUNK has some diferent requirement... Isn't
this
version enough?
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 00:20 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Why not give this a try:
cvs -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng login cvs -z3 -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng co radiusclient-ng
Regards, Norm
Edson wrote:
Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
-----Original Message----- From: Edson [mailto:4lists@gmail.com] Sent: sexta-feira, 14 de setembro de 2007 23:01 To: 'users@openser.org' Subject: Trunk Compile Error 2
I'm trying to compile the trunk version.
After updating I run make distclean and make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp postgres unixodbc" modules install
but after I always get:
make[1]: Leaving directory `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db'
make: *** [modules] Error 2
What is this "Error 2" ? In this same machine I can compile, without a glance, branche 1.2 with this same 'make' command.
Thanks for any help....
Edson
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Hi Edson,
The kind of error you reported happens when some files are added or shifted and the dependency files you have (creating during first compilation) get screwed.... You just need to do a "make proper" to solve this.
regards, bogdan
Edson wrote:
Hi, Norman...
Just to close this thread: Your first sugestion (a clean download) followed with a 'make distclean' resolve the problem. Thanks for the help.
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 01:51 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Hi,
- Are you using: svn co
https://openser.svn.sourceforge.net/svnroot/openser/trunk openser
1a) Instead of updating, try downloading the entire distribution into an empty directory.
- Did you remember to uncomment the setting below in
modules/acc/Makefile ? Not positive this is required for auth_radius (because we always uncomment the setting).
# set ENABLE_RADIUS_ACC to true if you wish to enable RADIUS accounting # (uncomment next line or 'ENABLE_RADIUS_ACC=true make all') ENABLE_RADIUS_ACC=true
Norm
Edson wrote:
Hi, Norman...
Thanks for Your response, but I already have radiusclient-ng version
0.5.6
installed...
If radiusclient-ng where not installed, the same 'make' command wouldn't compile branche 1.2. Maybe TRUNK has some diferent requirement... Isn't
this
version enough?
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 00:20 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Why not give this a try:
cvs -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng login cvs -z3 -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng co radiusclient-ng
Regards, Norm
Edson wrote:
Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
-----Original Message----- From: Edson [mailto:4lists@gmail.com] Sent: sexta-feira, 14 de setembro de 2007 23:01 To: 'users@openser.org' Subject: Trunk Compile Error 2
I'm trying to compile the trunk version.
After updating I run make distclean and make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp postgres unixodbc" modules install
but after I always get:
make[1]: Leaving directory `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db'
make: *** [modules] Error 2
What is this "Error 2" ? In this same machine I can compile, without a glance, branche 1.2 with this same 'make' command.
Thanks for any help....
Edson
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Thanks, Bogdan...
Your words explain why 'make distclean' didn't work....
Edson
-----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: sábado, 15 de setembro de 2007 12:54 To: Edson Cc: 'Norman Brandinger'; users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Hi Edson,
The kind of error you reported happens when some files are added or shifted and the dependency files you have (creating during first compilation) get screwed.... You just need to do a "make proper" to solve this.
regards, bogdan
Edson wrote:
Hi, Norman...
Just to close this thread: Your first sugestion (a clean download)
followed
with a 'make distclean' resolve the problem. Thanks for the help.
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 01:51 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Hi,
- Are you using: svn co
https://openser.svn.sourceforge.net/svnroot/openser/trunk openser
1a) Instead of updating, try downloading the entire distribution into an empty directory.
- Did you remember to uncomment the setting below in
modules/acc/Makefile ? Not positive this is required for auth_radius (because we always uncomment the setting).
# set ENABLE_RADIUS_ACC to true if you wish to enable RADIUS accounting # (uncomment next line or 'ENABLE_RADIUS_ACC=true make all') ENABLE_RADIUS_ACC=true
Norm
Edson wrote:
Hi, Norman...
Thanks for Your response, but I already have radiusclient-ng version
0.5.6
installed...
If radiusclient-ng where not installed, the same 'make' command
wouldn't
compile branche 1.2. Maybe TRUNK has some diferent requirement... Isn't
this
version enough?
Edson
-----Original Message----- From: Norman Brandinger [mailto:norm@goes.com] Sent: sábado, 15 de setembro de 2007 00:20 To: Edson Cc: users@openser.org Subject: Re: [OpenSER-Users] RE: Trunk Compile Error 2
Why not give this a try:
cvs -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng login cvs -z3 -d:pserver:anonymous@cvs.radiusclient-
ng.berlios.de:/cvsroot/radiusclient-
ng co radiusclient-ng
Regards, Norm
Edson wrote:
Just an update info:
# make modules=modules/auth_radius modules;echo $? make: *** [modules] Error 2 2 #
And yes, I need Radius support...
Edson
> -----Original Message----- > From: Edson [mailto:4lists@gmail.com] > Sent: sexta-feira, 14 de setembro de 2007 23:01 > To: 'users@openser.org' > Subject: Trunk Compile Error 2 > > I'm trying to compile the trunk version. > > After updating I run > make distclean > and > make exclude_modules="auth_diameter h350 ldap mi_xmlrpc osp > postgres unixodbc" modules install > > but after I always get: > > make[1]: Leaving directory > `/usr/local/src/VoIP/openser/openser/trunk/modules/auth_db' > > make: *** [modules] Error 2 > > What is this "Error 2" ? In this same machine I can compile, without
a
> glance, branche 1.2 with this same 'make' command. > > Thanks for any help.... > > Edson > > > _______________________________________________ Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
Users mailing list Users@openser.org http://openser.org/cgi-bin/mailman/listinfo/users
-
Bogdan-Andrei Iancu -
Edson -
Norman Brandinger