Hello, the source port of tcp connections is typically an ephemeral port, that's due to tcp design and os layer implementation. Newer kernels have the option for reuse port for tcp, but even then it cannot be guaranteed always -- there should be an option for recent kamailios as well. Maybe it can be enforced inside the c code of siptrace modue, when the hep header is built. I expect port 0 is set when it is not known for whatsoever reason. Cheers, Daniel On 18.01.22 13:13, Karsten Horsmann wrote: Hello List, I observe an interesting behavior. We use siptrace as an active capture agent for QXIP HOMER/HEPIC installations. The destination port and the source port in the HEPv3 Header are not correct if you use transport tcp for example. My Question: is that intended or a bug and i should fill up an issue? On udp, it's filled with 5060 or whatever your listening directive says. I tested that with kamailio 5.5 and kamailio master. I attached an HEPv3 capture from two kamailios (master) speaking with each other. You need the https://github.com/sipcapture/hep-wireshark lua dissector to read the capture. 10.0.2.15 (kamailio with uacreg and sipcapture/HEPv3 mode) 192.168.50.4 (kamailio as registrar) Frame 1 shows an tcp transport register Request from 10.0.2.15 to 192.168.50.4 in HEPv3. The Source Port in the HEP3 Protocol is not correct (its an highport / 45419). Frame 4 shows the 401 answer and the Destination port is 0. Frame 7 also had this behavior. ----- params (nearly at the end): modparam("siptrace", "duplicate_uri", "MY_HOMER_CAPTURE") modparam("siptrace", "hep_mode_on", 1) modparam("siptrace", "hep_version", 3) modparam("siptrace", "hep_capture_id", MY_HOMER_CAPTURE_ID) # capture agent id Limitation: 32-bit for HEPv3. modparam("siptrace", "trace_to_database", 0) modparam("siptrace", "trace_on", 1) modparam("siptrace", "trace_mode", 1) # default 0, if 1 then you dont need call siptrace flag or sip_trace() -- Mit freundlichen Grüßen / Kind Regards *Karsten Horsmann* __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions * sr-users(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online Feb 21-24, 2022 (America Timezone) * https://www.asipto.com/sw/kamailio-advanced-training-online/ __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions * sr-users(a)lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users