Hi Bogdan, please find attached my ser.cfg and the CPL script for call forwarding on no answer. Could it be a failure in my SER configuration? Many thanks, Oliver ----------------------------------------------------------------------- --------------------- # # $Id: ser.cfg,v 1.24 2003/11/11 15:32:36 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) #port=5060 #children=4 fifo="/tmp/ser_fifo" # Additional Aliases alias="t-systems.com" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/cpl-c.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # -- cpl-c module -- modparam("cpl-c","cpl_db","mysql://ser:???@localhost/ser") modparam("cpl-c","cpl_table","cpl") modparam("cpl-c","cpl_dtd_file","/usr/local/etc/ser/cpl-06.dtd") modparam("cpl-c","log_dir","/var/log/ser/cpl") modparam("cpl-c","proxy_recurse",2) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= max_len ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { t_relay(); break; }; lookup("aliases"); setflag(1); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("t-systems.com", "subscriber")) { www_challenge("t-systems.com", "0"); break; }; # handle REGISTER messages with CPL script cpl_process_register(); save("location"); break; }; # process INVITE if (method=="INVITE") { # cpl interpreter requires a pre-created transaction for the processed INVITE if (!t_newtran()) { # it's a retransmission break; }; if (!cpl_run_script("incoming")) { # script execution failed t_reply("500", "CPL script execution failed"); }; # we get here only if the CPL interpreter decided that server # should follow it default behavior # mark that there is already a created transaction for current INVITE setflag(3); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward current uri now if (!isflagset(3)) { # build a new fresh transaction and forward if (!t_relay()) { sl_reply_error(); }; } else { # transaction exists -> do just forward if (!t_forward_nonack_uri()) { sl_reply_error(); }; }; } ----------------------------------------------------------------------- --------------------- <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE cpl PUBLIC '-//IETF//DTD RFCxxxx CPL 1.0//EN' 'cpl.dtd'> <cpl> <incoming> <lookup source="registration" clear="yes"> <success> <proxy timeout="5"> <noanswer> <location url="sip:613@t-systems.com" clear="yes"> <proxy /> </location> </noanswer> </proxy> </success> </lookup> </incoming> ----------------------------------------------------------------------- --------------------- Bogdan-Andrei IANCU wrote Hi Oliver, can you send me your CPL script - it will help me to understand your problem. Thanks, Bogdan Brinker, Oliver wrote: _______________________________________________ Serusers mailing list serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers