All,
I have built branch 5.4 from source, and I’m working with the default config. However, from time to time I get this error when launching kamailio:
root@inbound-kamailio-test-02:~# /usr/local/sbin/kamailio -P /run/kamailio/kamailio.pid -f /usr/local/etc/kamailio/kamailio.cfg -m 128 -M 64 -E 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: syntax error 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: Invalid arguments 0(1296) CRITICAL: <core> [core/cfg.y:3591]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 35: ERROR: bad config file (3 errors) 0(1296) ERROR: <core> [core/ppcfg.c:234]: pp_ifdef_level_error(): different number of preprocessor directives: 1 more #!if[n]def as #!endif
However, if I run a “make install” from the source directory, this error goes away. Has anyone run into this issue before?
Configs attached.
Thanks!
~Noah
Try adding a newline at the end of your cfg files.
On Thu, Aug 20, 2020 at 11:48 AM Noah Mehl noahmehl@gmail.com wrote:
All,
I have built branch 5.4 from source, and I’m working with the default config. However, from time to time I get this error when launching kamailio:
root@inbound-kamailio-test-02:~# /usr/local/sbin/kamailio -P /run/kamailio/kamailio.pid -f /usr/local/etc/kamailio/kamailio.cfg -m 128 -M 64 -E 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: syntax error 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: Invalid arguments 0(1296) CRITICAL: <core> [core/cfg.y:3591]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 35: ERROR: bad config file (3 errors) 0(1296) ERROR: <core> [core/ppcfg.c:234]: pp_ifdef_level_error(): different number of preprocessor directives: 1 more #!if[n]def as #!endif
However, if I run a “make install” from the source directory, this error goes away. Has anyone run into this issue before?
Configs attached.
Thanks!
~Noah
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Adding a new line did not resolve this.
~Noah
On Aug 20, 2020, at 12:33 PM, Cindy Leung cinthia721@gmail.com wrote:
Try adding a newline at the end of your cfg files.
On Thu, Aug 20, 2020 at 11:48 AM Noah Mehl <noahmehl@gmail.com mailto:noahmehl@gmail.com> wrote: All,
I have built branch 5.4 from source, and I’m working with the default config. However, from time to time I get this error when launching kamailio:
root@inbound-kamailio-test-02:~# /usr/local/sbin/kamailio -P /run/kamailio/kamailio.pid -f /usr/local/etc/kamailio/kamailio.cfg -m 128 -M 64 -E 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: syntax error 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: Invalid arguments 0(1296) CRITICAL: <core> [core/cfg.y:3591]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 35: ERROR: bad config file (3 errors) 0(1296) ERROR: <core> [core/ppcfg.c:234]: pp_ifdef_level_error(): different number of preprocessor directives: 1 more #!if[n]def as #!endif
However, if I run a “make install” from the source directory, this error goes away. Has anyone run into this issue before?
Configs attached.
Thanks!
~Noah
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Hello,
in such cases, check the config file content and be sure you have corresponding "#!endif" for each #!ifdef or #!ifndef.
Cheers, Daniel
On 20.08.20 17:46, Noah Mehl wrote:
All,
I have built branch 5.4 from source, and I’m working with the default config. However, from time to time I get this error when launching kamailio:
root@inbound-kamailio-test-02:~# /usr/local/sbin/kamailio -P /run/kamailio/kamailio.pid -f /usr/local/etc/kamailio/kamailio.cfg -m 128 -M 64 -E 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: syntax error 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: Invalid arguments 0(1296) CRITICAL: <core> [core/cfg.y:3591]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 35: ERROR: bad config file (3 errors) 0(1296) ERROR: <core> [core/ppcfg.c:234]: pp_ifdef_level_error(): different number of preprocessor directives: 1 more #!if[n]def as #!endif
However, if I run a “make install” from the source directory, this error goes away. Has anyone run into this issue before?
Configs attached.
Thanks!
~Noah
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Daniel,
I have done this, but that’s why I’m confused, because sometimes it works, and sometimes it doesn’t (with no changes to the configs).
I ran a quick grep on the config:
root@inbound-kamailio-test-02:/usr/local/etc/kamailio# grep -i '#!if' kamailio.cfg | wc -l 61 root@inbound-kamailio-test-02:/usr/local/etc/kamailio# grep -i '#!end' kamailio.cfg | wc -l 61
But again, it fails randomly. If it really was that the #if[n]def’s didn’t match up with the #!endif’s, it would fail consistently?
~Noah
On Aug 25, 2020, at 9:30 AM, Daniel-Constantin Mierla miconda@gmail.com wrote:
Hello,
in such cases, check the config file content and be sure you have corresponding "#!endif" for each #!ifdef or #!ifndef.
Cheers, Daniel
On 20.08.20 17:46, Noah Mehl wrote:
All,
I have built branch 5.4 from source, and I’m working with the default config. However, from time to time I get this error when launching kamailio:
root@inbound-kamailio-test-02:~# /usr/local/sbin/kamailio -P /run/kamailio/kamailio.pid -f /usr/local/etc/kamailio/kamailio.cfg -m 128 -M 64 -E 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: syntax error 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: Invalid arguments 0(1296) CRITICAL: <core> [core/cfg.y:3591]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 35: ERROR: bad config file (3 errors) 0(1296) ERROR: <core> [core/ppcfg.c:234]: pp_ifdef_level_error(): different number of preprocessor directives: 1 more #!if[n]def as #!endif
However, if I run a “make install” from the source directory, this error goes away. Has anyone run into this issue before?
Configs attached.
Thanks!
~Noah
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org mailto:sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.com http://www.asipto.com/ www.twitter.com/miconda http://www.twitter.com/miconda -- www.linkedin.com/in/miconda http://www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla https://www.paypal.me/dcmierla
Hello,
you also have to be careful not to have such lines in comments or in the wrong order. Maybe just grep the lines starting with #! and be sure you have proper nesting of if[n]def and endif.
Another thing to check is if you have include/import files and if yes, that their content is correct.
Otherwise, if you have the same config and you start it with the same kamailio parameters, then is rather strange. You have to make a minimal config that exposes the issue and send it over here so we can reproduce and troubleshoot.
Cheers, Daniel
On 26.08.20 15:43, Noah Mehl wrote:
Daniel,
I have done this, but that’s why I’m confused, because sometimes it works, and sometimes it doesn’t (with no changes to the configs).
I ran a quick grep on the config:
root@inbound-kamailio-test-02:/usr/local/etc/kamailio# grep -i '#!if' kamailio.cfg | wc -l 61 root@inbound-kamailio-test-02:/usr/local/etc/kamailio# grep -i '#!end' kamailio.cfg | wc -l 61
But again, it fails randomly. If it really was that the #if[n]def’s didn’t match up with the #!endif’s, it would fail consistently?
~Noah
On Aug 25, 2020, at 9:30 AM, Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:
Hello,
in such cases, check the config file content and be sure you have corresponding "#!endif" for each #!ifdef or #!ifndef.
Cheers, Daniel
On 20.08.20 17:46, Noah Mehl wrote:
All,
I have built branch 5.4 from source, and I’m working with the default config. However, from time to time I get this error when launching kamailio:
root@inbound-kamailio-test-02:~# /usr/local/sbin/kamailio -P /run/kamailio/kamailio.pid -f /usr/local/etc/kamailio/kamailio.cfg -m 128 -M 64 -E 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: syntax error 0(1296) CRITICAL: <core> [core/cfg.y:3588]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 30-34: Invalid arguments 0(1296) CRITICAL: <core> [core/cfg.y:3591]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 410, column 35: ERROR: bad config file (3 errors) 0(1296) ERROR: <core> [core/ppcfg.c:234]: pp_ifdef_level_error(): different number of preprocessor directives: 1 more #!if[n]def as #!endif
However, if I run a “make install” from the source directory, this error goes away. Has anyone run into this issue before?
Configs attached.
Thanks!
~Noah
Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
-- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Funding: https://www.paypal.me/dcmierla
-
Cindy Leung -
Daniel-Constantin Mierla -
Noah Mehl