Hi Marrold, kamctl dispatcher dump ERROR: This command requires a database engine - none was loaded I thought i could run dispatcher module without database, it appears my strange behavior comes from this: i do not use a database. Instead I am usinq a flat dispatcher.list file: # Autogenerated @ Monday, April 18th 2016, 10:41:58 am 1 sip:172.16.0.203:5060 0 0 weight=50 1 sip:172.16.0.202:5060 0 0 weight=50 about the traffic generated toward asterisk boxes: tshark -w capture1 -f "port 5060" -i eth0 -P ………… nothing get captured ………… ………… What else should i attempt ? Thanks. ----- Mail original ----- De: "Marrold" <kamailio(a)marrold.co.uk> À: "Sébastien Brice" <sebastien.brice(a)jvs.fr>fr>, "sr-users" <sr-users(a)lists.sip-router.org> Envoyé: Lundi 18 Avril 2016 01:16:05 Objet: Re: [SR-Users] DISPATCHER module No destinations availables even if my Asterisk Boxes are up and running First of all I would check the result of - # kamctl dispatcher dump SET:: 4001 URI:: sip:10.0.97.17:5060 flags=IP priority=1 attrs=backend=be011 URI:: sip:10.0.97.18:5060 flags=IP priority=1 attrs=backend=be011 SET:: 4002 URI:: sip:10.0.97.21:5060 flags=AP priority=1 attrs=backend=be021 AP = Active, Probing IP = Inactive, Probing I'd also run a SIP trace on the Asterisk boxes to check if they are receiving / responding to the OPTIONS pings. On Sun, Apr 17, 2016 at 9:29 PM, Sébastien Brice <sebastien.brice(a)jvs.fr> wrote: _______________________________________________ SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list sr-users(a)lists.sip-router.org http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Thx you Daniel, actually i am running kamailio 4.1.7 [root@af173cb12922 /]# kamailio -v version: kamailio 4.1.7 (x86_64/linux) 85ffd9 But Marrold was right it appears Kamailio does not probe correctly my asterisk boxes :-( [root@af173cb12922 /]# kamctl mi ds_list SET_NO:: 1 SET:: 1 URI:: sip:172.16.0.202:5060 flags=IP priority=0 attrs=weight=50 URI:: sip:172.16.0.203:5060 flags=IP priority=0 attrs=weight=50 No ACTIVE gateway has been elected, i don't know what's wrong here. ----- Mail original ----- De: "Daniel-Constantin Mierla" &lt;miconda(a)gmail.com&gt; À: "Sébastien Brice" &lt;sebastien.brice(a)jvs.fr&gt;fr>, "sr-users" &lt;sr-users(a)lists.sip-router.org&gt;rg>, "Marrold" &lt;kamailio(a)marrold.co.uk&gt; Envoyé: Lundi 18 Avril 2016 14:07:00 Objet: Re: [SR-Users] DISPATCHER module No destinations availables even if my Asterisk Boxes are up and running Hello, "kamctl dispatcher dump" should not require anymore a db engine -- what is the version of kamailio you are using? Anyhow, you can do the raw mi command like: kamctl mi ds_list To reload is: kamct mi ds_reload Cheers, Daniel On 18/04/16 13:04, Sébastien Brice wrote: > Hi Marrold, > > kamctl dispatcher dump > ERROR: This command requires a database engine - none was loaded > I thought i could run dispatcher module without database, it appears my strange behavior comes from this: i do not use a database. > > Instead I am usinq a flat dispatcher.list file: > # Autogenerated @ Monday, April 18th 2016, 10:41:58 am > 1 sip:172.16.0.203:5060 0 0 weight=50 > 1 sip:172.16.0.202:5060 0 0 weight=50 > > > about the traffic generated toward asterisk boxes: > > tshark -w capture1 -f "port 5060" -i eth0 -P > ………… nothing get captured > ………… > ………… > > > What else should i attempt ? > > Thanks. > > > ----- Mail original ----- > De: "Marrold" &lt;kamailio(a)marrold.co.uk&gt; > À: "Sébastien Brice" &lt;sebastien.brice(a)jvs.fr&gt;fr>, "sr-users" &lt;sr-users(a)lists.sip-router.org&gt; > Envoyé: Lundi 18 Avril 2016 01:16:05 > Objet: Re: [SR-Users] DISPATCHER module No destinations availables even if my Asterisk Boxes are up and running > > First of all I would check the result of - > > # kamctl dispatcher dump > > SET:: 4001 > URI:: sip:10.0.97.17:5060 flags=IP priority=1 attrs=backend=be011 > URI:: sip:10.0.97.18:5060 flags=IP priority=1 attrs=backend=be011 > SET:: 4002 > URI:: sip:10.0.97.21:5060 flags=AP priority=1 attrs=backend=be021 > > AP = Active, Probing > IP = Inactive, Probing > > I'd also run a SIP trace on the Asterisk boxes to check if they are > receiving / responding to the OPTIONS pings. > > On Sun, Apr 17, 2016 at 9:29 PM, Sébastien Brice &lt;sebastien.brice(a)jvs.fr&gt; > wrote: > >> Hello everyone. >> I'm using kamailio as a dispatcher in front of asterisk boxes and i use a >> failure route if asterisk box does not respond or send 503 error (please >> look at my attached kamailio.cfg) >> >> I use "ds_probing_mode", 1 and "ds_ping_reply_codes", >> "class=2;class=3;class=4" to OPTIONS ping the two asterisk instances but >> they do appear down both all the time. >> >> That is very annoying none of the INVITE go through Asterisk, they all are >> stopped because of my failure_route that sets no destination available >> >> ERROR: <script>: Destination down: INVITE >> sip:9980048587420715@XXX.XXX.XXX.XX (sip:ipofAsterisk1:5060) >> ERROR: <script>: Destination down: INVITE sip:9980048587420715@YY.YY.YYY.YY >> (sip:ipofAsterisk1:5060) >> ERROR: <script>: Destination down: INVITE sip:000442030044700@XXX.XX.X.XXX >> (sip:ipofAsterisk2:5060) >> ERROR: <script>: Destination down: INVITE sip:000442030044700@YY.YYY.YY.YYY >> (sip:ipofAsterisk2:5060) >> NOTICE: <script>: Media server sip:172.16.0.202:5060 failed to answer, >> selecting other one! >> NOTICE: <script>: No destination, sent 404 >> >> I don't know what's wrong with my setup, could someone give an eye to my >> kamailio.cfg and head me on the right track ? >> Thanks a lot. >> >> Seb >> >> >> >> _______________________________________________ >> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >> sr-users(a)lists.sip-router.org >> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >> >> > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users