About kamailio + freeswitch issue on Kamailio v5.6

List overview All Threads
Download

newer

older

tsilo logging

Re: [SR-Users] play_media sounds...

SparkleZou

10 Oct 2022 10 Oct '22

2:24 a.m.

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR， Sparkle Zou

Attachments:

attachment.html (text/html — 1.5 KB)
kamailio.cfg (application/octet-stream — 27.5 KB)

Show replies by date

SparkleZou

10 Oct 10 Oct

8:30 a.m.

Hi Sir/Mada,

Fond the issue. The Orange part could NOT at the end of file. it will report the error: 1 more #!if[n]def as #!endif

It's really weird.

Although the kamailio start and freeswitch working. But the SIP message is NOT process well. kamailio Always reply 480 Temoraritly Unavailable.

#!ifdef WITH_FREESWITCH failure_route[FAIL_FSVBOX] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset(FLB_NATB) || isflagset(FLT_NATS))) { unforce_rtp_proxy(); } #!endif

if (t_is_canceled()) { exit; }

if (t_check_status("486|408")) { # re-route to FreeSWITCH VoiceMail $rU = $avp(callee); route(FSVBOX); } } #!endif

# Manage failure routing cases failure_route[MANAGE_FAILURE] { route(NATMANAGE);

if (t_is_canceled()) exit;

#!ifdef WITH_BLOCK3XX # block call redirect based on 3xx replies. if (t_check_status("3[0-9][0-9]")) { t_reply("404","Not found"); exit; } #!endif

#!ifdef WITH_BLOCK401407 # block call redirect based on 401, 407 replies. if (t_check_status("401|407")) { t_reply("404","Not found"); exit; } #!endif

#!ifdef WITH_VOICEMAIL # serial forking # - route to voicemail on busy or no answer (timeout) if (t_check_status("486|408")) { $du = $null; route(TOVOICEMAIL); exit; } #!endif return; }

BR, Sparkle Zou

At 2022-10-10 10:24:40, "SparkleZou" sparklezou@126.com wrote:

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR， Sparkle Zou

Henning Westerholt

9:56 a.m.

Hello,

as you already noticed, this tutorial was about an older version of Kamailio so its probably needs some adaptions. Regarding the startup errors you are facing, please have a look to the system log files to get more information on the probable causes.

Cheers,

Henning

-- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com https://gilawa.com/

From: sr-users sr-users-bounces@lists.kamailio.org On Behalf Of SparkleZou Sent: Monday, October 10, 2022 4:25 AM To: sr-users@lists.kamailio.org Subject: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR， Sparkle Zou

SparkleZou

11 Oct 11 Oct

5:11 a.m.

Hi Henning，

Thanks！If the empty macro defined at the end of file, it will report 1 more #!if[n]def as #!endif

#!ifdef WITH_FREESWITCH #!endif

But if the macro defined in before the last function, it's OK.

Seems the macro at the end of file could NOT be parsed correctly. Seems a bug.

BR, Sparkle Zou

At 2022-10-10 17:56:31, "Henning Westerholt" hw@gilawa.com wrote:

Hello,

as you already noticed, this tutorial was about an older version of Kamailio so its probably needs some adaptions.

Regarding the startup errors you are facing, please have a look to the system log files to get more information on the probable causes.

Cheers,

Henning

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR，

Sparkle Zou

Henning Westerholt

6:28 a.m.

Hello,

maybe add a single new-line at the end will fix it, or there are some other non-printable characters that causes errors. Just play a bit around with it.

Cheers,

Henning

-- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com https://gilawa.com/

From: SparkleZou sparklezou@126.com Sent: Tuesday, October 11, 2022 7:11 AM To: Henning Westerholt hw@gilawa.com Cc: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Subject: Re:RE: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hi Henning，

Thanks！If the empty macro defined at the end of file, it will report 1 more #!if[n]def as #!endif

#!ifdef WITH_FREESWITCH #!endif

But if the macro defined in before the last function, it's OK.

Seems the macro at the end of file could NOT be parsed correctly. Seems a bug.

BR, Sparkle Zou

At 2022-10-10 17:56:31, "Henning Westerholt" <hw@gilawa.commailto:hw@gilawa.com> wrote: Hello,

Cheers,

Henning

-- Henning Westerholt - https://skalatan.de/blog/ Kamailio services - https://gilawa.com https://gilawa.com/

From: sr-users <sr-users-bounces@lists.kamailio.orgmailto:sr-users-bounces@lists.kamailio.org> On Behalf Of SparkleZou Sent: Monday, October 10, 2022 4:25 AM To: sr-users@lists.kamailio.orgmailto:sr-users@lists.kamailio.org Subject: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR， Sparkle Zou

Daniel-Constantin Mierla

6:56 a.m.

Hello,

preprocessor directives require the end-of-line, it is where the parser stops and evaluates what was before. So, as hinted before, add it at the end and it should work.

Cheers, Daniel

On 11.10.22 08:28, Henning Westerholt wrote:

...

Hello,

maybe add a single new-line at the end will fix it, or there are some other non-printable characters that causes errors. Just play a bit around with it.

Cheers,

Henning

--

Henning Westerholt – https://skalatan.de/blog/ https://skalatan.de/blog/

Kamailio services – https://gilawa.com https://gilawa.com/

*From:*SparkleZou sparklezou@126.com *Sent:* Tuesday, October 11, 2022 7:11 AM *To:* Henning Westerholt hw@gilawa.com *Cc:* Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org *Subject:* Re:RE: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hi Henning，

Thanks！If the empty macro defined at the end of file, it will report 1 more #!if[n]def as #!endif

*/#!ifdef WITH_FREESWITCH/*

*/#!endif/*

But if the macro defined in before the last function, it's OK.

Seems the macro at the end of file could NOT be parsed correctly. Seems a bug.

BR,

Sparkle Zou

At 2022-10-10 17:56:31, "Henning Westerholt" hw@gilawa.com wrote:
Hello,

 

as you already noticed, this tutorial was about an older version
of Kamailio so its probably needs some adaptions.

Regarding the startup errors you are facing, please have a look to
the system log files to get more information on the probable causes.

 

Cheers,

 

Henning

 

-- 

Henning Westerholt – https://skalatan.de/blog/
<https://skalatan.de/blog/>

Kamailio services – https://gilawa.com <https://gilawa.com/>

 

*From:*sr-users <sr-users-bounces@lists.kamailio.org> *On Behalf
Of *SparkleZou
*Sent:* Monday, October 10, 2022 4:25 AM
*To:* sr-users@lists.kamailio.org
*Subject:* [SR-Users] About kamailio + freeswitch issue on
Kamailio v5.6

 

Hi Sir/Mada,

 

I'm trying to integrate kamailio + freeswitch, according to the
manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio
v5.6

 

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then
kamailio could NOT start up. 

 

Could you please help check, what should be modified to fit the
version 5.6？

 

Thanks！

 

BR，

Sparkle Zou

 
Kamailio - Users Mailing List - Non Commercial Discussions

sr-users@lists.kamailio.org

Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:

https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online Nov 7-10, 2022 (Europe Timezone) * https://www.asipto.com/sw/kamailio-advanced-training-online/

Kaufman

1:36 p.m.

As a note, a quick way to debug more interactively (then checking out the syslog, which may or may not be well configured for Kamailio), run Kamailio in the foreground:

Kamailio -ddDDeE

Explanation of the switches here:

-dd A good debug level (info and higher) -DD Do not daemonize creator; (run in the foreground) -E Log to stderr -e Log messages printed in terminal colors (requires -E)

Most likely problems you’ll encounter here are situations where one module has been replaced/renamed with another and some module param requirement changes, but the startup output should give decent clues.

Kaufman Sr. VoIP Engineer - BCM One

+1.612.735.9309 bkaufman@bcmone.commailto:bkaufman@bcmone.com 24 hour client support: +1.855.639.6300

From: sr-users sr-users-bounces@lists.kamailio.org On Behalf Of Henning Westerholt Sent: Monday, October 10, 2022 5:57 AM To: Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org Cc: SparkleZou sparklezou@126.com Subject: Re: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hello,

Cheers,

Henning

-- Henning Westerholt - https://skalatan.de/blog/https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fskalatan.de%2Fblog%2F&data=05%7C01%7Cbkaufman%40bcmone.com%7C6d07d11d7bb04e6e4bcf08daaaa5d577%7Cafc1818e7b6848568913201b9396c4fc%7C1%7C0%7C638009926490175611%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=wMQWVnjy44yG3zprtLUKglir%2BO8GHoaK3HuwbGrsuWA%3D&reserved=0 Kamailio services - https://gilawa.com https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgilawa.com%2F&data=05%7C01%7Cbkaufman%40bcmone.com%7C6d07d11d7bb04e6e4bcf08daaaa5d577%7Cafc1818e7b6848568913201b9396c4fc%7C1%7C0%7C638009926490175611%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=%2FiYXh18%2FH%2BupBryfgqpnHnTbyp56Kx4lwTG12HJo3%2B0%3D&reserved=0

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fkb.asipto.com%2Ffreeswitch%3Akamailio-3.3.x-freeswitch-1.2.x-sbc&data=05%7C01%7Cbkaufman%40bcmone.com%7C6d07d11d7bb04e6e4bcf08daaaa5d577%7Cafc1818e7b6848568913201b9396c4fc%7C1%7C0%7C638009926490175611%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=RMsyZyhWZAjCuWZpUp72BAGz6eWNwCe1luJfr%2FzDm40%3D&reserved=0 on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR， Sparkle Zou

SparkleZou

12 Oct 12 Oct

1:52 a.m.

Hi Kaufman,

Really thanks for the tips. ^_^ Currently It's OK now.

If the empty macro defined at the end of file, it will report 1 more #!if[n]def as #!endif

#!ifdef WITH_FREESWITCH #!endif

But if the macro defined in before the last function, it's OK.

Seems the macro at the end of file could NOT be parsed correctly. Seems a bug.

BR, Sparkle Zou

At 2022-10-11 21:36:18, "Kaufman" bkaufman@bcmone.com wrote:

As a note, a quick way to debug more interactively (then checking out the syslog, which may or may not be well configured for Kamailio), run Kamailio in the foreground:

Kamailio -ddDDeE

Explanation of the switches here:

-dd A good debug level (info and higher)

-DD Do not daemonize creator; (run in the foreground)

-E Log to stderr

-e Log messages printed in terminal colors (requires -E)

Kaufman

Sr. VoIP Engineer - BCM One

+1.612.735.9309

bkaufman@bcmone.com

24 hour client support: +1.855.639.6300

Hello,

as you already noticed, this tutorial was about an older version of Kamailio so its probably needs some adaptions.

Regarding the startup errors you are facing, please have a look to the system log files to get more information on the probable causes.

Cheers,

Henning

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com

From: sr-users sr-users-bounces@lists.kamailio.org On Behalf Of SparkleZou Sent: Monday, October 10, 2022 4:25 AM To:sr-users@lists.kamailio.org Subject: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR，

Sparkle Zou

SparkleZou

2:07 a.m.

Hi Kaufman,

Currently I set up kamailio + freeswitch as the manual. kamailio + freeswitch start up fine.

10.120.100.237 is the windows client, with 2 software clients. account is 103 & 104 10.120.100.246 is the IP of kamailio 10.120.100.245 is the IP of freeswitch

104 call 103. seems the SIP process is working fine. except the last ACK message.

104 send ACK message to kamailio 10.120.100.246. Then kamailio sholde sent ACK message to freeswitch 10.120.100.245. But here send to a unknown IP 163.125.45.132

Really weird.

I searched internet. said it cause by NAT. But here is NO NAT.

Please help check. Thanks!

BR, Sparkle Zou

At 2022-10-11 21:36:18, "Kaufman" bkaufman@bcmone.com wrote:

As a note, a quick way to debug more interactively (then checking out the syslog, which may or may not be well configured for Kamailio), run Kamailio in the foreground:

Kamailio -ddDDeE

Explanation of the switches here:

-dd A good debug level (info and higher)

-DD Do not daemonize creator; (run in the foreground)

-E Log to stderr

-e Log messages printed in terminal colors (requires -E)

Kaufman

Sr. VoIP Engineer - BCM One

+1.612.735.9309

bkaufman@bcmone.com

24 hour client support: +1.855.639.6300

Hello,

as you already noticed, this tutorial was about an older version of Kamailio so its probably needs some adaptions.

Regarding the startup errors you are facing, please have a look to the system log files to get more information on the probable causes.

Cheers,

Henning

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com

From: sr-users sr-users-bounces@lists.kamailio.org On Behalf Of SparkleZou Sent: Monday, October 10, 2022 4:25 AM To:sr-users@lists.kamailio.org Subject: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR，

Sparkle Zou

SparkleZou

8:20 a.m.

Hi Kaufman,

It's OK now.

in vars.xml，set "external_rtp_ip" "external_sip_ip" of "stun-set" to the local host IP.

Thanks!

BR, Sparkle Zou

At 2022-10-12 10:07:30, "SparkleZou" sparklezou@126.com wrote:

Hi Kaufman,

Currently I set up kamailio + freeswitch as the manual. kamailio + freeswitch start up fine.

10.120.100.237 is the windows client, with 2 software clients. account is 103 & 104 10.120.100.246 is the IP of kamailio 10.120.100.245 is the IP of freeswitch

104 call 103. seems the SIP process is working fine. except the last ACK message.

104 send ACK message to kamailio 10.120.100.246. Then kamailio sholde sent ACK message to freeswitch 10.120.100.245. But here send to a unknown IP 163.125.45.132

Really weird.

I searched internet. said it cause by NAT. But here is NO NAT.

Please help check. Thanks!

BR, Sparkle Zou

At 2022-10-11 21:36:18, "Kaufman" bkaufman@bcmone.com wrote:

As a note, a quick way to debug more interactively (then checking out the syslog, which may or may not be well configured for Kamailio), run Kamailio in the foreground:

Kamailio -ddDDeE

Explanation of the switches here:

-dd A good debug level (info and higher)

-DD Do not daemonize creator; (run in the foreground)

-E Log to stderr

-e Log messages printed in terminal colors (requires -E)

Kaufman

Sr. VoIP Engineer - BCM One

+1.612.735.9309

bkaufman@bcmone.com

24 hour client support: +1.855.639.6300

Hello,

as you already noticed, this tutorial was about an older version of Kamailio so its probably needs some adaptions.

Regarding the startup errors you are facing, please have a look to the system log files to get more information on the probable causes.

Cheers,

Henning

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com

From: sr-users sr-users-bounces@lists.kamailio.org On Behalf Of SparkleZou Sent: Monday, October 10, 2022 4:25 AM To:sr-users@lists.kamailio.org Subject: [SR-Users] About kamailio + freeswitch issue on Kamailio v5.6

Hi Sir/Mada,

I'm trying to integrate kamailio + freeswitch, according to the manual http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc on Kamailio v5.6

modified the kamailio.cfg file, add WITH_FREESWITCH parts, then kamailio could NOT start up.

Could you please help check, what should be modified to fit the version 5.6？

Thanks！

BR，

Sparkle Zou

868

Age (days ago)

870

Last active (days ago)

sr-users@lists.kamailio.org

9 comments

4 participants

tags (0)

participants (4)

Daniel-Constantin Mierla
Henning Westerholt
Kaufman
SparkleZou