31 Jan
2012
31 Jan
'12
7:16 a.m.
Hello,
We have been using Asterisk for sometime and over the last year have
started hosting instances for our clients on a vmware platform. These
virtual pbx are located on public ip addresses and each customer has
their own SIP trunk arrangements with various providers. We have
decided to pool our resources and would like to start aggregating
traffic.
From reading online I have installed Kamailio 3.1.x with Asterisk
1.6.x. On top of this I have installed Siremis 3.2 in hopes of using
it as a graphical front end.
I am wanting to use Kamailio as a proxy to the SIP providers and allow
the Asterisk to register only with Kamailio. Is there a link to some
example configs with a tutorial pertaining to this type of deployment?
If this is a good solution, it is my intention to recommend a
consultant be hired to assist with a production server. I just need
to learn allot more, before I can recommend Kamailio for the job.
Do you think it's a good fit?
Thank you for your kind responses,
Greg
31 Jan
31 Jan
7:50 a.m.
Hi,
Kamailio is definitely the exact tool for this purpose, I have exactly the
same setup running as yours and for scalability we started using Kamailio
in front of our asterisk servers. Long story short, read these articles.
http://kb.asipto.com/asterisk:realtime:kamailio-3.1.x-asterisk-1.6.2-astdb
http://saevolgo.blogspot.com/2011/11/increasing-voip-services-capacity.html
Once after setting up the environments you don't need Public IPs on your
asterisk servers. Just only for Kamailio server(s)
Regards,
Sammy.
On Tue, Jan 31, 2012 at 11:16 AM, Greg Mannie <greg(a)latigi.com> wrote:
Hello,
We have been using Asterisk for sometime and over the last year have
started hosting instances for our clients on a vmware platform. These
virtual pbx are located on public ip addresses and each customer has their
own SIP trunk arrangements with various providers. We have decided to
pool our resources and would like to start aggregating traffic.
From reading online I have installed Kamailio 3.1.x with Asterisk 1.6.x.
On top of this I have installed Siremis 3.2 in hopes of using it as a
graphical front end.
I am wanting to use Kamailio as a proxy to the SIP providers and allow the
Asterisk to register only with Kamailio. Is there a link to some example
configs with a tutorial pertaining to this type of deployment?
If this is a good solution, it is my intention to recommend a consultant
be hired to assist with a production server. I just need to learn allot
more, before I can recommend Kamailio for the job.
Do you think it's a good fit?
Thank you for your kind responses,
Greg
______________________________**_________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http:/…
10:22 p.m.
In Asterisk - sip.conf
[MyKamailioUser]
type = friend
host = 192.168.2.2 - internal IP of Kamailio
insecure = port,invite
context = {where you would like to get calls - you can use default, or not
use this part at all}
In Asterisk - only authentication is based on IP of Kamailio server.
In Kamailio, I am using:
ds_select_dst("1","4");
to get Asterisk from pool (if you have more then one asterisk behind
Kamailio)
and then - t_relay, instead of forward, because my Asterisk has only
internal IP. Calls are sent back to Kamailio in case of calling other user,
or directly to provider. Asterisk also is connected via registrar to
provider for incomming calls.
In my configuration, I am using some dirty solutions for problems with ACK
and BYE, but more or less everything works fine. rtpproxy - solves problems
with NAT, and users must not use STUN.
On Tue, Jan 31, 2012 at 8:50 AM, Sammy Govind <govoiper(a)gmail.com> wrote:
Hi,
Kamailio is definitely the exact tool for this purpose, I have exactly the
same setup running as yours and for scalability we started using Kamailio
in front of our asterisk servers. Long story short, read these articles.
http://kb.asipto.com/asterisk:realtime:kamailio-3.1.x-asterisk-1.6.2-astdb
http://saevolgo.blogspot.com/2011/11/increasing-voip-services-capacity.html
Once after setting up the environments you don't need Public IPs on your
asterisk servers. Just only for Kamailio server(s)
Regards,
Sammy.
On Tue, Jan 31, 2012 at 11:16 AM, Greg Mannie <greg(a)latigi.com> wrote:
Hello,
We have been using Asterisk for sometime and over the last year have
started hosting instances for our clients on a vmware platform. These
virtual pbx are located on public ip addresses and each customer has their
own SIP trunk arrangements with various providers. We have decided to
pool our resources and would like to start aggregating traffic.
From reading online I have installed Kamailio 3.1.x with Asterisk 1.6.x.
On top of this I have installed Siremis 3.2 in hopes of using it as a
graphical front end.
I am wanting to use Kamailio as a proxy to the SIP providers and allow
the Asterisk to register only with Kamailio. Is there a link to some
example configs with a tutorial pertaining to this type of deployment?
If this is a good solution, it is my intention to recommend a consultant
be hired to assist with a production server. I just need to learn allot
more, before I can recommend Kamailio for the job.
Do you think it's a good fit?
Thank you for your kind responses,
Greg
______________________________**_________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/**cgi-bin/mailman/listinfo/sr-**users<http:/…
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4470
days inactive
4470
days old
2 comments
3 participants
participants (3)
-
Greg Mannie -
Sammy Govind -
Stoyan Mihaylov