Date: Fri, 25 Oct 2013 17:48:13 -0400 From: Fred Posner fred@palner.com To: "Kamailio (SER) - Users Mailing List" sr-users@lists.sip-router.org Cc: SR-Users sr-users@lists.sip-router.org Subject: Re: [SR-Users] Kamailio network edge for registration and rtp pass-through Message-ID: 6D231DE3-5BED-4601-A097-5A79CEF452F0@palner.com Content-Type: text/plain; charset=us-ascii

Do you need the registration be local to the asterisk?

I would have all the asterisks send calls to the Kamailio.

You can have a lookup on endpoint outbound to decide which asterisk should handle the outbound call for that did.

Also a lookup for incoming DIDs, etc.

---Fred

On Oct 25, 2013, at 5:43 PM, Jr Richardson jmr.richardson@gmail.com

wrote:

Hi All,

Starting a new project, roll your own SBC, not a full SBC, just need some

minor functionality. I'm interested in deploying Kamailio as a edge device on a VSP for single entry point for hosted PBX's, Asterisk based. I had some wonderful and informative conversations at Astricon 2013, several folks assuring me Kamailio w/rtpproxy was the tool for the job, so this is a follow up to delve more into details.

I've been researching configs, topology, modules needed, ect... Most of

the examples I'm reading about for this scenario are spreading the registrations across many PBX's without distinction. One concept I'm struggling with is having a specific phone register to a specific PBX.

phone-customer-A-x101><internet><kamailio><PBX-customer-A-x101 phone-customer-B-x101><internet><kamailio><PBX-customer-B-x101 phone-customer-C-x101><internet><kamailio><PBX-customer-B-x101

I could add a unique identifier to some part of the registration of each

phone like 'custA-101@kamailio_server', custB-101@kamailio_server, ect. What I'm not clear on is when the request comes to kamailio, where would I identify what PBX the phone should register to and how to re-write the 'custA-101@kamailio_server' to '101@custA-pbx' and forward to the correct PBX and ensure rtp flows through kamailio.

Could this function be derived using dbaliases or possibly using

dispatcher with group number for each customer PBX?

So assuming I can get the registrations to work properly, would standard

invite for calling just work or would I also have to have specific config in place to ensure an invite from customer A phone also reaches the correct customer A PBX?

A point in the right direction?

Thanks.

JR

I would like kamailio to be transparent in the process, i.e. phones register locally to their respective PBX.

Thanks.

JR