10 Jun
2010
10 Jun
'10
4:57 p.m.
Hi everyone.
I have two machines running OpenSER, one machines runs OpenSER A and the other runs
OpenSER B. Phone A registers in OpenSER A while Phone B registers in OpenSER B. I would
like to allow Phone A call Phone B, but not the other way around. I am a newbie so sorry
for my lack of knowledge. Would should be my configurations files for OpenSER A and B?
Thanks in advanced
10 Jun
10 Jun
5:02 p.m.
On 06/10/2010 10:57 AM, SR-USER wrote:
I would like to allow Phone A call Phone B, but not
the other way around.
That depends on whether you want to disallow Phone B from calling Phone
A only, or disallow Phone B from calling a subset of all existing other
phones, or disallow Phone B from making any calls.
--
Alex Balashov - Principal
Evariste Systems LLC
1170 Peachtree Street
12th Floor, Suite 1200
Atlanta, GA 30309
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
5:04 p.m.
Hi there.
The main question is how to allow phone A call phone B. Forget about the other way
around.
Thanks
On Jun 10, 2010, at 4:02 PM, Alex Balashov wrote:
On 06/10/2010 10:57 AM, SR-USER wrote:
I would like to allow Phone A call Phone B, but
not the other way around.
That depends on whether you want to disallow Phone B from calling Phone A only, or
disallow Phone B from calling a subset of all existing other phones, or disallow Phone B
from making any calls.
--
Alex Balashov - Principal
Evariste Systems LLC
1170 Peachtree Street
12th Floor, Suite 1200
Atlanta, GA 30309
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
5:12 p.m.
On 06/10/2010 11:04 AM, SR-USER wrote:
The main question is how to allow phone A call phone
B.
Do you want the call to phone B to be the only conceivable call A can
make? Or do you want phone A to be able to call any phone registered to
OpenSER B? Or make other calls that don't necessarily go to OpenSER B
as well?
--
Alex Balashov - Principal
Evariste Systems LLC
1170 Peachtree Street
12th Floor, Suite 1200
Atlanta, GA 30309
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
7:45 p.m.
Phone A can call any phone registered to OpenSER B.
Thanks
On Jun 10, 2010, at 4:12 PM, Alex Balashov wrote:
On 06/10/2010 11:04 AM, SR-USER wrote:
The main question is how to allow phone A call
phone B.
Do you want the call to phone B to be the only conceivable call A can make? Or do you
want phone A to be able to call any phone registered to OpenSER B? Or make other calls
that don't necessarily go to OpenSER B as well?
--
Alex Balashov - Principal
Evariste Systems LLC
1170 Peachtree Street
12th Floor, Suite 1200
Atlanta, GA 30309
Tel: +1-678-954-0670
Fax: +1-404-961-1892
Web: http://www.evaristesys.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users 
5:38 p.m.
If you use the default configuration phone A just have to dial
sip:userB@ip.address.of.serverB
and it works out of the box.
regards
Klaus
Am 10.06.2010 16:57, schrieb SR-USER:
Hi everyone.
I have two machines running OpenSER, one machines runs OpenSER A and the other runs
OpenSER B. Phone A registers in OpenSER A while Phone B registers in OpenSER B. I would
like to allow Phone A call Phone B, but not the other way around. I am a newbie so sorry
for my lack of knowledge. Would should be my configurations files for OpenSER A and B?
Thanks in advanced
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
7:46 p.m.
Yes but I want the call to go through OpenSER A to OpenSER B and then to Phone B.
Thanks
On Jun 10, 2010, at 4:38 PM, Klaus Darilion wrote:
If you use the default configuration phone A just have
to dial
sip:userB@ip.address.of.serverB
and it works out of the box.
regards
Klaus
Am 10.06.2010 16:57, schrieb SR-USER:
> Hi everyone.
>
> I have two machines running OpenSER, one machines runs OpenSER A and the other runs
OpenSER B. Phone A registers in OpenSER A while Phone B registers in OpenSER B. I would
like to allow Phone A call Phone B, but not the other way around. I am a newbie so sorry
for my lack of knowledge. Would should be my configurations files for OpenSER A and B?
>
> Thanks in advanced
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users(a)lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
11 Jun
11 Jun
5:40 p.m.
On Thursday 10 June 2010, SR-USER wrote:
Yes but I want the call to go through OpenSER A to
OpenSER B and then to
Phone B.
Hi SR,
ok, then you need to check in the cfg if the destination user belongs to you,
but is not registered on proxy A. Then you could relay it to proxy B which
will forward it to phone B. The same logic (vice versa) applies to proxy B.
Cheers,
Henning
5089
days inactive
5090
days old
7 comments
4 participants
participants (4)
-
Alex Balashov -
Henning Westerholt -
Klaus Darilion -
SR-USER