3 May
2014
3 May
'14
10:50 p.m.
Hello, can someone let me know what could be the reason that the location
table in the kamailiio db does not get updated? There are some extensions
that I can see in the location table but not others, but I am still able to
make extension to extension calls to all extensions. This is a multi domain
set up.
Thank you,
Arun
3 May
3 May
10:51 p.m.
On 05/03/2014 10:50 PM, VOIP Tests wrote:
Hello, can someone let me know what could be the
reason that the
location table in the kamailiio db does not get updated? There are some
extensions that I can see in the location table but not others, but I am
still able to make extension to extension calls to all extensions. This
is a multi domain set up.
The first question is, what is your usrloc db_mode?
http://kamailio.org/docs/modules/4.1.x/modules/usrloc.html#usrloc.p.db_mode
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
11:08 p.m.
Hello Alex, my usrloc setting are as follows:
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
modparam("usrloc", "matching_mode", 1)
Arun
On Sat, May 3, 2014 at 9:51 PM, Alex Balashov <abalashov(a)evaristesys.com>wrote;wrote:
On 05/03/2014 10:50 PM, VOIP Tests wrote:
Hello, can someone let me know what could be the reason that the
location table in the kamailiio db does not get
updated? There are some
extensions that I can see in the location table but not others, but I am
still able to make extension to extension calls to all extensions. This
is a multi domain set up.
The first question is, what is your usrloc db_mode?
http://kamailio.org/docs/modules/4.1.x/modules/usrloc.
html#usrloc.p.db_mode
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
11:10 p.m.
On 05/03/2014 11:08 PM, VOIP Tests wrote:
Hello Alex, my usrloc setting are as follows:
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
modparam("usrloc", "matching_mode", 1)
Then, I would say wait for <timer_interval> seconds (by default 60) and
see if the content of the location table now matches up with that of the
runtime state of the registrar (i.e. kamctl ul show).
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
11:27 p.m.
No, the table does not seem to get updated. The entries in kamctl ul show
--brief does not match the entries in the location table. Any suggestions?
Thank you,
Arun
On Sat, May 3, 2014 at 10:10 PM, Alex Balashov <abalashov(a)evaristesys.com>wrote;wrote:
On 05/03/2014 11:08 PM, VOIP Tests wrote:
Hello Alex, my usrloc setting are as follows:
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
modparam("usrloc", "matching_mode", 1)
Then, I would say wait for <timer_interval> seconds (by default 60) and
see if the content of the location table now matches up with that of the
runtime state of the registrar (i.e. kamctl ul show).
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
4 May
4 May
9:05 a.m.
Once I reboot the phone the location table gets populated? Any idea how to
correct the issue? Thank you.
Arun
On Sat, May 3, 2014 at 10:27 PM, VOIP Tests <kamailio.fs(a)gmail.com> wrote:
No, the table does not seem to get updated. The
entries in kamctl ul show
--brief does not match the entries in the location table. Any suggestions?
Thank you,
Arun
On Sat, May 3, 2014 at 10:10 PM, Alex Balashov <abalashov(a)evaristesys.com>wrote;wrote:
On 05/03/2014 11:08 PM, VOIP Tests wrote:
Hello Alex, my usrloc setting are as follows:
#!ifdef WITH_USRLOCDB
modparam("usrloc", "db_url", DBURL)
modparam("usrloc", "db_mode", 2)
modparam("usrloc", "use_domain", MULTIDOMAIN)
modparam("usrloc", "matching_mode", 1)
Then, I would say wait for <timer_interval> seconds (by default 60) and
see if the content of the location table now matches up with that of the
runtime state of the registrar (i.e. kamctl ul show).
--
Alex Balashov - Principal
Evariste Systems LLC
235 E Ponce de Leon Ave
Suite 106
Decatur, GA 30030
United States
Tel: +1-678-954-0670
Web: http://www.evaristesys.com/, http://www.alexbalashov.com/
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
3904
days inactive
3904
days old
5 comments
2 participants
participants (2)
-
Alex Balashov -
VOIP Tests