Hi,
I'm about to hack up the textops module a bit, and wondered if anyone else has run into this.
I'd like to create a line like:
P-Asserted-ID: 14085551212@mydomain.com
and insert this into the sip packet.
I'd use append_hf(), except the number listed above is contained in the From: URI.
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
-g
-- Greg Fausak greg@thursday.com
Hi Greg,
Tip: Hack the diversion module instead. It's quick, simple and working ;-)
-Atle
* Greg Fausak lgfausak@gmail.com [051004 22:54]:
Hi,
I'm about to hack up the textops module a bit, and wondered if anyone else has run into this.
I'd like to create a line like:
P-Asserted-ID: 14085551212@mydomain.com
and insert this into the sip packet.
I'd use append_hf(), except the number listed above is contained in the From: URI.
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
-g
-- Greg Fausak greg@thursday.com
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
I haven't tried, but what about: avp_write("$from","i:35"); avp_pushto("$P-Asserted-ID","i:35"); avp_delete("i:35"); g-) ----- Original Message ----- From: Greg Fausak To: serusers@lists.iptel.org Cc: greg@thursday.com Sent: Tuesday, October 04, 2005 10:52 PM Subject: [Serusers] append_hf, append_urihf (append_furihf)
Hi,
I'm about to hack up the textops module a bit, and wondered if anyone else has run into this.
I'd like to create a line like:
P-Asserted-ID: 14085551212@mydomain.com
and insert this into the sip packet.
I'd use append_hf(), except the number listed above is contained in the From: URI.
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
-g
-- Greg Fausak greg@thursday.com
------------------------------------------------------------------------------
_______________________________________________ Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Greg Fausak writes:
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
a more general purpose solution would be to load from uri into an avp and then include that avp value into appended hf. perhaps there already exists a way to do so, i just have not needed it yet.
-- juha
On 10/05/05 09:18, Juha Heinanen wrote:
Greg Fausak writes:
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
a more general purpose solution would be to load from uri into an avp and then include that avp value into appended hf. perhaps there already exists a way to do so, i just have not needed it yet.
with avpops module:
avp_write("$from","i:678"); avp_pushto("$P-Asserted-ID","i:678");
Daniel
-- juha
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
Wow,
I had to upgrade (I was on 0.8.12). Then I loaded avp and avpops and did the suggestion below.
avp_write("$from","i:678"); avp_pushto("$P-Asserted-ID","i:678");
Worked great, the output looks like:
P-Asserted-ID: sip:+12145551212@test.com
However, I need the output to look like:
P-Asserted-ID: sip:+12145551212@test.com
Does avp let me format the output at all? I tried a bunch of stuff that didn't work.
This avp stuff is great. I should have looked at it a long time ago. Variables, what a concept ;-)
-g
On 10/5/05, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
On 10/05/05 09:18, Juha Heinanen wrote:
Greg Fausak writes:
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
a more general purpose solution would be to load from uri into an avp and then include that avp value into appended hf. perhaps there already exists a way to do so, i just have not needed it yet.
with avpops module:
avp_write("$from","i:678"); avp_pushto("$P-Asserted-ID","i:678");
Daniel
-- juha
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Greg Fausak greg@thursday.com
Hello Greg,
On 10/05/05 21:56, Greg Fausak wrote:
Wow,
I had to upgrade (I was on 0.8.12). Then I loaded avp and avpops and did the suggestion below.
avp_write("$from","i:678"); avp_pushto("$P-Asserted-ID","i:678");Worked great, the output looks like:
P-Asserted-ID: sip:+12145551212@test.com
However, I need the output to look like:
P-Asserted-ID: sip:+12145551212@test.com
Does avp let me format the output at all? I tried a bunch of stuff that didn't work.
only openser development version (cvs is frozen, it's going to be released stable very soon, after testing thoroughly TLS and fixing a few issues discovered while testing) has a function named avp_printf() which can combine constant strings with avps or other pseudo-variables (see: http://www.voice-system.ro/docs/avpops/ar01s06.html#avp_printf and http://openser.org/docs/pseudo-variables.html).
Cheers, Daniel
This avp stuff is great. I should have looked at it a long time ago. Variables, what a concept ;-)
-g
On 10/5/05, Daniel-Constantin Mierla daniel@voice-system.ro wrote:
On 10/05/05 09:18, Juha Heinanen wrote:
Greg Fausak writes:
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
a more general purpose solution would be to load from uri into an avp and then include that avp value into appended hf. perhaps there already exists a way to do so, i just have not needed it yet.
with avpops module:
avp_write("$from","i:678"); avp_pushto("$P-Asserted-ID","i:678");
Daniel
-- juha
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-- Greg Fausak greg@thursday.com
Greg Fausak wrote:
Hi,
I'm about to hack up the textops module a bit, and wondered if anyone else has run into this.
I'd like to create a line like:
P-Asserted-ID: 14085551212@mydomain.com
What about: P-Asserted-Identity: sip:+14085551212@mydomain.com P-Asserted-Identity: tel:+14085551212
Klaus
and insert this into the sip packet.
I'd use append_hf(), except the number listed above is contained in the From: URI.
I was going to hack a append_urihf() into a append_furihf() to accomplish the task...can I do this with an exec_dset or something else?
-g
-- Greg Fausak greg@thursday.com mailto:greg@thursday.com
Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
-
Atle Samuelsen -
Daniel-Constantin Mierla -
Greg Fausak -
Greger V. Teigre -
Juha Heinanen -
Klaus Darilion