I have done avp_print (); Here's the output: 1(11832) INFO: avpops [avpops_impl.c:1488]: ops_print_avp(): name=<digest_challenge> 1(11832) INFO: avpops [avpops_impl.c:1496]: ops_print_avp(): val_str=<Proxy-Authenticate: Digest realm="sip.voip.by", nonce="VIgtSVSILB3mhgkw9TUSxb2W5cVvKr4S", qop="auth" Received no attributes in the AVP (For Example "Session-Timeout")... The answer comes from the Radius after proxy_challenge("$fd", "0"); Access-Accept (2) AVP: l=6 t=Session-Timeout(27): 11234 11.12.2014, 16:06, "Daniel-Constantin Mierla" &lt;miconda(a)gmail.com&gt;om>: > Not using radius myself, but a quick look at the code reveals that some > avps are generated after authentication. You can print the list of the > avps with avp_print(): > > http://kamailio.org/docs/modules/stable/modules/avpops.html#avpops.f.avp_pr… > > Then you can see what is getting back from radius. > > Cheers, > Daniel > > On 10/12/14 20:42, Kalala Alexander wrote: >> Radius server sends a response containing an attribute (Session-Timeout (27): 2342). >> How is the value saved in the AVPs using module auch_radius? >> >> Config: >> >> modparam("auth_radius", "radius_config","/etc/radiusclient-ng/radiusclient.conf") >> modparam("auth_radius", "service_type",15) >> modparam("auth_radius", "use_ruri_flag", 22) >> modparam("auth_radius", "auth_extra", >> "Calling-Station-Id=$fU;Called-Station-Id=$tU;Acct-Session-Id=$ci") >> >> if (is_method("REGISTER")) >> { >> # authenticate the REGISTER requests (uncomment to enable auth) >> if (!radius_www_authorize("$td")) { >> www_challenge("$td", "0"); >> exit; >> } >> >> if ($au!=$tU) >> { >> sl_send_reply("403","Forbidden auth ID"); >> exit; >> } >> } >> >> ............................... >> >> if (from_uri==myself) >> { >> if (!radius_proxy_authorize("$fd", "$fU")) { >> proxy_challenge("$fd", "0"); >> exit; >> >> } > -- > Daniel-Constantin Mierla > http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Thanks for the answer, but from RFC2865 https://tools.ietf.org/html/rfc2865#page-48 modules/auth_radius/authrad_mod.c ++ attrs[A_SESSION_TIMEOUT].n = "Session-Timeout"; lib/kcore/radius.h ++ #define A_SESSION_TIMEOUT 27 can rad_dict.h How to specificy in C++, this attribute? in modules/auth_radius/sterman.c 11.12.2014, 18:11, "Daniel-Constantin Mierla" &lt;miconda(a)gmail.com&gt;om>: > Looking a bit deeper in the code, apparently only SIP_AVP (code 27) are > added as avps -- see generate_avps(): > > modules/auth_radius/sterman.c > > For adding all radius avps, I guess some extra C code needs to be pushed > there. > > Cheers, > Daniel > > On 11/12/14 14:57, Kalala Alexander wrote: >> I have done avp_print (); Here's the output: >> >> 1(11832) INFO: avpops [avpops_impl.c:1488]: ops_print_avp(): name=<digest_challenge> >> 1(11832) INFO: avpops [avpops_impl.c:1496]: ops_print_avp(): val_str=<Proxy-Authenticate: Digest realm="sip.voip.by", nonce="VIgtSVSILB3mhgkw9TUSxb2W5cVvKr4S", qop="auth" >> >> Received no attributes in the AVP (For Example "Session-Timeout")... >> The answer comes from the Radius after proxy_challenge("$fd", "0"); >> >> Access-Accept (2) >> AVP: l=6 t=Session-Timeout(27): 11234 >> >> 11.12.2014, 16:06, "Daniel-Constantin Mierla" &lt;miconda(a)gmail.com&gt;om>: >>> Not using radius myself, but a quick look at the code reveals that some >>> avps are generated after authentication. You can print the list of the >>> avps with avp_print(): >>> >>> http://kamailio.org/docs/modules/stable/modules/avpops.html#avpops.f.avp_pr… >>> >>> Then you can see what is getting back from radius. >>> >>> Cheers, >>> Daniel >>> >>> On 10/12/14 20:42, Kalala Alexander wrote: >>>> Radius server sends a response containing an attribute (Session-Timeout (27): 2342). >>>> How is the value saved in the AVPs using module auch_radius? >>>> >>>> Config: >>>> >>>> modparam("auth_radius", "radius_config","/etc/radiusclient-ng/radiusclient.conf") >>>> modparam("auth_radius", "service_type",15) >>>> modparam("auth_radius", "use_ruri_flag", 22) >>>> modparam("auth_radius", "auth_extra", >>>> "Calling-Station-Id=$fU;Called-Station-Id=$tU;Acct-Session-Id=$ci") >>>> >>>> if (is_method("REGISTER")) >>>> { >>>> # authenticate the REGISTER requests (uncomment to enable auth) >>>> if (!radius_www_authorize("$td")) { >>>> www_challenge("$td", "0"); >>>> exit; >>>> } >>>> >>>> if ($au!=$tU) >>>> { >>>> sl_send_reply("403","Forbidden auth ID"); >>>> exit; >>>> } >>>> } >>>> >>>> ............................... >>>> >>>> if (from_uri==myself) >>>> { >>>> if (!radius_proxy_authorize("$fd", "$fU")) { >>>> proxy_challenge("$fd", "0"); >>>> exit; >>>> >>>> } >>> -- >>> Daniel-Constantin Mierla >>> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users(a)lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > -- > Daniel-Constantin Mierla > http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

Daniel, Possible to make changes to the module for the understanding of AVP from Radius?

11.12.2014, 18:11, "Daniel-Constantin Mierla" &lt;miconda(a)gmail.com&gt;om>: > Looking a bit deeper in the code, apparently only SIP_AVP (code 27) are > added as avps -- see generate_avps(): > > modules/auth_radius/sterman.c > > For adding all radius avps, I guess some extra C code needs to be pushed > there. > > Cheers, > Daniel > > On 11/12/14 14:57, Kalala Alexander wrote: >> I have done avp_print (); Here's the output: >> >> 1(11832) INFO: avpops [avpops_impl.c:1488]: ops_print_avp(): name=<digest_challenge> >> 1(11832) INFO: avpops [avpops_impl.c:1496]: ops_print_avp(): val_str=<Proxy-Authenticate: Digest realm="sip.voip.by", nonce="VIgtSVSILB3mhgkw9TUSxb2W5cVvKr4S", qop="auth" >> >> Received no attributes in the AVP (For Example "Session-Timeout")... >> The answer comes from the Radius after proxy_challenge("$fd", "0"); >> >> Access-Accept (2) >> AVP: l=6 t=Session-Timeout(27): 11234 >> >> 11.12.2014, 16:06, "Daniel-Constantin Mierla" &lt;miconda(a)gmail.com&gt;om>: >>> Not using radius myself, but a quick look at the code reveals that some >>> avps are generated after authentication. You can print the list of the >>> avps with avp_print(): >>> >>> http://kamailio.org/docs/modules/stable/modules/avpops.html#avpops.f.avp_pr… >>> >>> Then you can see what is getting back from radius. >>> >>> Cheers, >>> Daniel >>> >>> On 10/12/14 20:42, Kalala Alexander wrote: >>>> Radius server sends a response containing an attribute (Session-Timeout (27): 2342). >>>> How is the value saved in the AVPs using module auch_radius? >>>> >>>> Config: >>>> >>>> modparam("auth_radius", "radius_config","/etc/radiusclient-ng/radiusclient.conf") >>>> modparam("auth_radius", "service_type",15) >>>> modparam("auth_radius", "use_ruri_flag", 22) >>>> modparam("auth_radius", "auth_extra", >>>> "Calling-Station-Id=$fU;Called-Station-Id=$tU;Acct-Session-Id=$ci") >>>> >>>> if (is_method("REGISTER")) >>>> { >>>> # authenticate the REGISTER requests (uncomment to enable auth) >>>> if (!radius_www_authorize("$td")) { >>>> www_challenge("$td", "0"); >>>> exit; >>>> } >>>> >>>> if ($au!=$tU) >>>> { >>>> sl_send_reply("403","Forbidden auth ID"); >>>> exit; >>>> } >>>> } >>>> >>>> ............................... >>>> >>>> if (from_uri==myself) >>>> { >>>> if (!radius_proxy_authorize("$fd", "$fU")) { >>>> proxy_challenge("$fd", "0"); >>>> exit; >>>> >>>> } >>> -- >>> Daniel-Constantin Mierla >>> http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda >>> >>> _______________________________________________ >>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list >>> sr-users(a)lists.sip-router.org >>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users > -- > Daniel-Constantin Mierla > http://twitter.com/#!/miconda - http://www.linkedin.com/in/miconda > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users

These attributes indentichny and are one and same data. Billing System (Radius server) these attributes allow the maximum call time for the client. Perhaps there is contact Ovidiu Sas or Juha Heinanen, who developed this module?

It would be nice to do to download any attribute value, for example: modparam("auth_radius", "auth_get", "Session-Timeout=$avp(time);h323-credit-time=$avp(cisco-time)");