28 Nov
2020
28 Nov
'20
10:34 a.m.
Greetings,
I'm having a "fun" time trying to run Kamailio inside a Docker container.
It keeps failing with:
0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg -
using memory manager: q_malloc
0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager(): shm -
using memory manager: q_malloc
Illegal instruction (core dumped)
Unfortunately the core dump is nowhere to be found. I have tried to follow
the instructions at:
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
but that hasn't helped.
The environment is as follows:
* Host hardware: Raspberry Pi 4 (4G memory)
* Host OS: Ubuntu 20.04.1 LTS
* Docker version 19.03.13
* Docker base image: arm32v7/ubuntu
root@2ef8a21534fa:/# kamailio -v
version: kamailio 5.3.2 (arm/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE,
USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC,
TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT-NOSMP,
USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST,
HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: unknown
compiled with gcc 9.2.1
The config file passes the syntax check:
kamailio -c -f /etc/kamailio/kamailio.cfg
and, the most interesting part, if I run Kamailio on the host machine,
_with the exact same config file_, it runs fine.
I'd appreciate any clues you may have. Thanks.
cv
28 Nov
28 Nov
11:36 a.m.
You can start kamailio under GDB debugger.
When issue reproduced, then you can get stack trace and variables values
сб, 28 нояб. 2020 г., 18:35 Carlos Vicente <cvicente.lists(a)gmail.com>om>:
Greetings,
I'm having a "fun" time trying to run Kamailio inside a Docker container.
It keeps failing with:
0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg -
using memory manager: q_malloc
0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager(): shm -
using memory manager: q_malloc
Illegal instruction (core dumped)
Unfortunately the core dump is nowhere to be found. I have tried to follow
the instructions at:
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
but that hasn't helped.
The environment is as follows:
* Host hardware: Raspberry Pi 4 (4G memory)
* Host OS: Ubuntu 20.04.1 LTS
* Docker version 19.03.13
* Docker base image: arm32v7/ubuntu
root@2ef8a21534fa:/# kamailio -v
version: kamailio 5.3.2 (arm/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: unknown
compiled with gcc 9.2.1
The config file passes the syntax check:
kamailio -c -f /etc/kamailio/kamailio.cfg
and, the most interesting part, if I run Kamailio on the host machine,
_with the exact same config file_, it runs fine.
I'd appreciate any clues you may have. Thanks.
cv
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
29 Nov
29 Nov
8:13 a.m.
Thank you for your response.
I'm trying to run it under gdb but it's not doing anything:
```
(gdb) exec-file /usr/sbin/kamailio
(gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
(gdb) run
Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -D -d -E
warning: Error disabling address space randomization: Success
```
It just stops there. Am I missing something?
cv
On Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov <s.safarov(a)gmail.com> wrote:
You can start kamailio under GDB debugger.
When issue reproduced, then you can get stack trace and variables values
сб, 28 нояб. 2020 г., 18:35 Carlos Vicente <cvicente.lists(a)gmail.com>om>:
Greetings,
I'm having a "fun" time trying to run Kamailio inside a Docker container.
It keeps failing with:
0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg -
using memory manager: q_malloc
0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager(): shm -
using memory manager: q_malloc
Illegal instruction (core dumped)
Unfortunately the core dump is nowhere to be found. I have tried to
follow the instructions at:
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
but that hasn't helped.
The environment is as follows:
* Host hardware: Raspberry Pi 4 (4G memory)
* Host OS: Ubuntu 20.04.1 LTS
* Docker version 19.03.13
* Docker base image: arm32v7/ubuntu
root@2ef8a21534fa:/# kamailio -v
version: kamailio 5.3.2 (arm/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: unknown
compiled with gcc 9.2.1
The config file passes the syntax check:
kamailio -c -f /etc/kamailio/kamailio.cfg
and, the most interesting part, if I run Kamailio on the host machine,
_with the exact same config file_, it runs fine.
I'd appreciate any clues you may have. Thanks.
cv
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
8:23 a.m.
you can change
set args -f /etc/kamailio/kamailio.cfg -D -d -E
To
set args -f /etc/kamailio/kamailio.cfg -DD -d -E
On Sun, Nov 29, 2020 at 4:14 PM Carlos Vicente <cvicente.lists(a)gmail.com>
wrote:
Thank you for your response.
I'm trying to run it under gdb but it's not doing anything:
```
(gdb) exec-file /usr/sbin/kamailio
(gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
(gdb) run
Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -D -d -E
warning: Error disabling address space randomization: Success
```
It just stops there. Am I missing something?
cv
On Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov <s.safarov(a)gmail.com>
wrote:
You can start kamailio under GDB debugger.
When issue reproduced, then you can get stack trace and variables values
сб, 28 нояб. 2020 г., 18:35 Carlos Vicente <cvicente.lists(a)gmail.com>om>:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Greetings,
I'm having a "fun" time trying to run Kamailio inside a Docker
container. It keeps failing with:
0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg -
using memory manager: q_malloc
0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager(): shm -
using memory manager: q_malloc
Illegal instruction (core dumped)
Unfortunately the core dump is nowhere to be found. I have tried to
follow the instructions at:
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
but that hasn't helped.
The environment is as follows:
* Host hardware: Raspberry Pi 4 (4G memory)
* Host OS: Ubuntu 20.04.1 LTS
* Docker version 19.03.13
* Docker base image: arm32v7/ubuntu
root@2ef8a21534fa:/# kamailio -v
version: kamailio 5.3.2 (arm/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: unknown
compiled with gcc 9.2.1
The config file passes the syntax check:
kamailio -c -f /etc/kamailio/kamailio.cfg
and, the most interesting part, if I run Kamailio on the host machine,
_with the exact same config file_, it runs fine.
I'd appreciate any clues you may have. Thanks.
cv
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
30 Nov
30 Nov
4:27 a.m.
Maybe the hints on stackoverflow are also useful:
*
https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-d…
Cheers,
Daniel
On 29.11.20 14:23, Sergey Safarov wrote:
you can change
set args -f /etc/kamailio/kamailio.cfg -D -d -E
To
set args -f /etc/kamailio/kamailio.cfg -DD -d -E
On Sun, Nov 29, 2020 at 4:14 PM Carlos Vicente
<cvicente.lists(a)gmail.com <mailto:cvicente.lists@gmail.com>> wrote:
Thank you for your response.
I'm trying to run it under gdb but it's not doing anything:
```
(gdb) exec-file /usr/sbin/kamailio
(gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
(gdb) run
Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg
-D -d -E
warning: Error disabling address space randomization: Success
```
It just stops there. Am I missing something?
cv
On Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov
<s.safarov(a)gmail.com <mailto:s.safarov@gmail.com>> wrote:
You can start kamailio under GDB debugger.
When issue reproduced, then you can get stack trace and
variables values
сб, 28 нояб. 2020 г., 18:35 Carlos Vicente
<cvicente.lists(a)gmail.com <mailto:cvicente.lists@gmail.com>>:
Greetings,
I'm having a "fun" time trying to run Kamailio inside a
Docker container. It keeps failing with:
0(238) DEBUG: <core> [core/mem/pkg.c:108]:
pkg_print_manager(): pkg - using memory manager: q_malloc
0(238) DEBUG: <core> [core/mem/shm.c:300]:
shm_print_manager(): shm - using memory manager: q_malloc
Illegal instruction (core dumped)
Unfortunately the core dump is nowhere to be found. I have
tried to follow the instructions at:
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
<https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile>
but that hasn't helped.
The environment is as follows:
* Host hardware: Raspberry Pi 4 (4G memory)
* Host OS: Ubuntu 20.04.1 LTS
* Docker version 19.03.13
* Docker base image: arm32v7/ubuntu
root@2ef8a21534fa:/# kamailio -v
version: kamailio 5.3.2 (arm/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK,
SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC,
DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT-NOSMP,
USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144,
MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt,
select.
id: unknown
compiled with gcc 9.2.1
The config file passes the syntax check:
kamailio -c -f /etc/kamailio/kamailio.cfg
and, the most interesting part, if I run Kamailio on the
host machine, _with the exact same config file_, it runs fine.
I'd appreciate any clues you may have. Thanks.
cv
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
9:22 a.m.
Daniel,
Thank you. That finally helped getting the core file written. Here is the
gdb output:
```
root@6e5c06e979cf:/# gdb /usr/sbin/kamailio /cores/core.kamailio.207
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html
This is free software: you are free to change
and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/sbin/kamailio...
(No debugging symbols found in /usr/sbin/kamailio)
[New LWP 207]
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -DD
-E -ddd'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x007d9cb8 in qm_shm_malloc ()
(gdb) bt
#0 0x007d9cb8 in qm_shm_malloc ()
#1 0x0061a58c in init_atomic_ops ()
#2 0x00562508 in main ()
```
What can be done about that?
cv
On Mon, Nov 30, 2020 at 4:29 AM Daniel-Constantin Mierla <miconda(a)gmail.com wrote:
> Maybe the hints on stackoverflow are also useful:
> *
>
https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-d…
> Cheers,
> Daniel
> On 29.11.20 14:23, Sergey Safarov wrote:
> you can change
> set args -f /etc/kamailio/kamailio.cfg -D -d -E
> To
> set args -f /etc/kamailio/kamailio.cfg -DD -d -E
> On Sun, Nov 29, 2020 at 4:14 PM Carlos
Vicente <cvicente.lists(a)gmail.com
> wrote:
>> Thank you for your response.
> >> I'm trying to run it under gdb but
it's not doing anything:
> >> ```
>> (gdb) exec-file /usr/sbin/kamailio
>> (gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
>> (gdb) run
>> Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -D -d
>> -E
>> warning: Error disabling address space randomization: Success
>> ```
> >> It just stops there. Am I missing
something?
> >> cv
> >> On Sat, Nov 28, 2020 at 11:37 AM Sergey
Safarov <s.safarov(a)gmail.com >> wrote:
> >>> You can start kamailio under GDB
debugger.
>>> When issue reproduced, then you can get stack trace and variables values
>> >> >>> сб, 28 нояб. 2020 г., 18:35 Carlos
Vicente <cvicente.lists(a)gmail.com>om>:
>> >>>>
Greetings,
>>> >>>>
I'm having a "fun" time trying to run Kamailio inside a Docker
>>>> container. It keeps failing with:
>>> >>>>
0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg -
>>>> using memory manager: q_malloc
>>>> 0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager():
shm -
>>>> using memory manager: q_malloc
>>>> Illegal instruction (core dumped)
>>> >>>>
Unfortunately the core dump is nowhere to be found. I have tried to
>>>> follow the instructions at:
>>> >>> >>>>
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
>>> >>>> but
that hasn't helped.
>>> >>>> The
environment is as follows:
>>> >>>> *
Host hardware: Raspberry Pi 4 (4G memory)
>>>> * Host OS: Ubuntu 20.04.1 LTS
>>>> * Docker version 19.03.13
>>>> * Docker base image: arm32v7/ubuntu
>>> >>>>
root@2ef8a21534fa:/# kamailio -v
>>>> version: kamailio 5.3.2 (arm/linux)
>>>> flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
>>>> DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
>>>> F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
>>>> FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER,
USE_NAPTR,
>>>> USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
>>>> ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE
>>>> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
>>>> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>>>> id: unknown
>>>> compiled with gcc 9.2.1
>>> >>>> The
config file passes the syntax check:
>>> >>>>
kamailio -c -f /etc/kamailio/kamailio.cfg
>>> >>>> and,
the most interesting part, if I run Kamailio on the host machine,
>>>> _with the exact same config file_, it runs fine.
>>> >>>>
I'd appreciate any clues you may have. Thanks.
>>> >>>> cv
>>> >>> >>>>
_______________________________________________
>>>> Kamailio (SER) - Users Mailing List
>>>> sr-users(a)lists.kamailio.org
>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>> >>>
_______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>> >>
_______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> _______________________________________________
> Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
> Funding: https://www.paypal.me/dcmierla
>
_______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
9:32 a.m.
Are you compiled Kamailio from sources?
If compiled from sources or installed "debug" files then pelase show output
of "bt full" command.
On Mon, Nov 30, 2020 at 5:23 PM Carlos Vicente <cvicente.lists(a)gmail.com>
wrote:
Daniel,
Thank you. That finally helped getting the core file written. Here is the
gdb output:
```
root@6e5c06e979cf:/# gdb /usr/sbin/kamailio /cores/core.kamailio.207
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <
http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/sbin/kamailio...
(No debugging symbols found in /usr/sbin/kamailio)
[New LWP 207]
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg
-DD -E -ddd'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x007d9cb8 in qm_shm_malloc ()
(gdb) bt
#0 0x007d9cb8 in qm_shm_malloc ()
#1 0x0061a58c in init_atomic_ops ()
#2 0x00562508 in main ()
```
What can be done about that?
cv
On Mon, Nov 30, 2020 at 4:29 AM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
Maybe the hints on stackoverflow are also
useful:
*
https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-d…
Cheers,
Daniel
On 29.11.20 14:23, Sergey Safarov wrote:
you can change
set args -f /etc/kamailio/kamailio.cfg -D -d -E
To
set args -f /etc/kamailio/kamailio.cfg -DD -d -E
On Sun, Nov 29, 2020 at 4:14 PM Carlos Vicente <cvicente.lists(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Thank you for your response.
I'm trying to run it under gdb but it's not doing anything:
```
(gdb) exec-file /usr/sbin/kamailio
(gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
(gdb) run
Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -D -d
-E
warning: Error disabling address space randomization: Success
```
It just stops there. Am I missing something?
cv
On Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov <s.safarov(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
You can start kamailio under GDB debugger.
When issue reproduced, then you can get stack trace and variables values
сб, 28 нояб. 2020 г., 18:35 Carlos Vicente <cvicente.lists(a)gmail.com>om>:
> Greetings,
>
> I'm having a "fun" time trying to run Kamailio inside a Docker
> container. It keeps failing with:
>
> 0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg -
> using memory manager: q_malloc
> 0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager(): shm -
> using memory manager: q_malloc
> Illegal instruction (core dumped)
>
> Unfortunately the core dump is nowhere to be found. I have tried to
> follow the instructions at:
>
>
> https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
>
> but that hasn't helped.
>
> The environment is as follows:
>
> * Host hardware: Raspberry Pi 4 (4G memory)
> * Host OS: Ubuntu 20.04.1 LTS
> * Docker version 19.03.13
> * Docker base image: arm32v7/ubuntu
>
> root@2ef8a21534fa:/# kamailio -v
> version: kamailio 5.3.2 (arm/linux)
> flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
> DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
> F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
> FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
> USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
> ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE
> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
> id: unknown
> compiled with gcc 9.2.1
>
> The config file passes the syntax check:
>
> kamailio -c -f /etc/kamailio/kamailio.cfg
>
> and, the most interesting part, if I run Kamailio on the host machine,
> _with the exact same config file_, it runs fine.
>
> I'd appreciate any clues you may have. Thanks.
>
> cv
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
10:38 a.m.
I couldn't find any "-debug" packages, so I compiled the latest version:
```
root@348cbcfcb96c:~# /usr/local/sbin/kamailio -v
version: kamailio 5.5.0-dev3 (arm/linux) d43163
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE,
USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC,
TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT-NOSMP,
USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST,
HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: d43163
compiled on 15:17:51 Nov 30 2020 with gcc 9.3.0
```
But still not symbols:
```
root@348cbcfcb96c:~# gdb /usr/local/sbin/kamailio /cores/core.kamailio.19
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html
This is free software: you are free to change
and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/local/sbin/kamailio...
(No debugging symbols found in /usr/local/sbin/kamailio)
[New LWP 19]
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/local/sbin/kamailio -f
/etc/kamailio/kamailio.cfg -DD -E -d'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x00b06320 in tsl ()
(gdb) bt full
#0 0x00b06320 in tsl ()
No symbol table info available.
#1 0x00b06380 in get_lock ()
No symbol table info available.
#2 0x00b1979c in qm_shm_malloc ()
No symbol table info available.
#3 0x009504dc in ksr_shutdown_phase_init ()
No symbol table info available.
#4 0x0078e3f4 in main ()
No symbol table info available.
(gdb) quit
```
TIA
cv
On Mon, Nov 30, 2020 at 9:33 AM Sergey Safarov <s.safarov(a)gmail.com> wrote:
> Are you compiled Kamailio from sources?
> If compiled from sources or installed
"debug" files then pelase show
> output of "bt full" command.
> On Mon, Nov 30, 2020 at 5:23 PM Carlos
Vicente <cvicente.lists(a)gmail.com
> wrote:
>> Daniel,
> >> Thank you. That finally helped getting
the core file written. Here is the
>> gdb output:
> >> ```
>> root@6e5c06e979cf:/# gdb /usr/sbin/kamailio /cores/core.kamailio.207
>> GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
>> Copyright (C) 2020 Free Software Foundation, Inc.
>> License GPLv3+: GNU GPL version 3 or later <
>> http://gnu.org/licenses/gpl.html
>> This is free software: you are free to change and redistribute it.
>> There is NO WARRANTY, to the extent permitted by law.
>> Type "show copying" and "show warranty" for details.
>> This GDB was configured as "arm-linux-gnueabihf".
>> Type "show configuration" for configuration details.
>> For bug reporting instructions, please see:
>> <http://www.gnu.org/software/gdb/bugs/>.
>> Find the GDB manual and other documentation resources online at:
>> <http://www.gnu.org/software/gdb/documentation/>.
> >> For help, type "help".
>> Type "apropos word" to search for commands related to
"word"...
>> Reading symbols from /usr/sbin/kamailio...
>> (No debugging symbols found in /usr/sbin/kamailio)
>> [New LWP 207]
>> [Thread debugging using libthread_db enabled]
>> Using host libthread_db library
>> "/lib/arm-linux-gnueabihf/libthread_db.so.1".
>> Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg
>> -DD -E -ddd'.
>> Program terminated with signal SIGILL, Illegal instruction.
>> #0 0x007d9cb8 in qm_shm_malloc ()
>> (gdb) bt
>> #0 0x007d9cb8 in qm_shm_malloc ()
>> #1 0x0061a58c in init_atomic_ops ()
>> #2 0x00562508 in main ()
>> ```
> >> What can be done about that?
> >> cv
> >> On Mon, Nov 30, 2020 at 4:29 AM
Daniel-Constantin Mierla <
>> miconda(a)gmail.com> wrote:
> >>> Maybe the hints on stackoverflow
are also useful:
>> >>> *
>>>
https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-d…
>> >>> Cheers,
>>> Daniel
>>> On 29.11.20 14:23, Sergey Safarov wrote:
>> >>> you can
change
>>> set args -f /etc/kamailio/kamailio.cfg -D -d -E
>> >>> To
>>> set args -f /etc/kamailio/kamailio.cfg -DD -d -E
>> >>> On Sun,
Nov 29, 2020 at 4:14 PM Carlos Vicente <cvicente.lists(a)gmail.com >>> wrote:
>> >>>>
Thank you for your response.
>>> >>>>
I'm trying to run it under gdb but it's not doing anything:
>>> >>>> ```
>>>> (gdb) exec-file /usr/sbin/kamailio
>>>> (gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
>>>> (gdb) run
>>>> Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -D
>>>> -d -E
>>>> warning: Error disabling address space randomization: Success
>>>> ```
>>> >>>> It
just stops there. Am I missing something?
>>> >>>> cv
>>> >>>> On
Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov <s.safarov(a)gmail.com >>>> wrote:
>>> >>>>>
You can start kamailio under GDB debugger.
>>>>> When issue reproduced, then you can get stack trace and variables
>>>>> values
>>>> >>>> >>>>> сб, 28 нояб. 2020 г., 18:35
Carlos Vicente <cvicente.lists(a)gmail.com>om>:
>>>>
>>>>>> Greetings,
>>>>>
>>>>>> I'm having a "fun" time trying to run
Kamailio inside a Docker
>>>>>> container. It keeps failing with:
>>>>>
>>>>>> 0(238) DEBUG: <core> [core/mem/pkg.c:108]:
pkg_print_manager(): pkg
>>>>>> - using memory manager: q_malloc
>>>>>> 0(238) DEBUG: <core> [core/mem/shm.c:300]:
shm_print_manager(): shm
>>>>>> - using memory manager: q_malloc
>>>>>> Illegal instruction (core dumped)
>>>>>
>>>>>> Unfortunately the core dump is nowhere to be found. I have
tried to
>>>>>> follow the instructions at:
>>>>>
>>>>>
>>>>>>
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
>>>>>
>>>>>> but that hasn't helped.
>>>>>
>>>>>> The environment is as follows:
>>>>>
>>>>>> * Host hardware: Raspberry Pi 4 (4G memory)
>>>>>> * Host OS: Ubuntu 20.04.1 LTS
>>>>>> * Docker version 19.03.13
>>>>>> * Docker base image: arm32v7/ubuntu
>>>>>
>>>>>> root@2ef8a21534fa:/# kamailio -v
>>>>>> version: kamailio 5.3.2 (arm/linux)
>>>>>> flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
>>>>>> DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC,
Q_MALLOC,
>>>>>> F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
>>>>>> FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER,
USE_NAPTR,
>>>>>> USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
>>>>>> ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144,
MAX_URI_SIZE
>>>>>> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
>>>>>> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>>>>>> id: unknown
>>>>>> compiled with gcc 9.2.1
>>>>>
>>>>>> The config file passes the syntax check:
>>>>>
>>>>>> kamailio -c -f /etc/kamailio/kamailio.cfg
>>>>>
>>>>>> and, the most interesting part, if I run Kamailio on the
host
>>>>>> machine, _with the exact same config file_, it runs fine.
>>>>>
>>>>>> I'd appreciate any clues you may have. Thanks.
>>>>>
>>>>>> cv
>>>>>
>>>>>
>>>>>> _______________________________________________
>>>>>> Kamailio (SER) - Users Mailing List
>>>>>> sr-users(a)lists.kamailio.org
>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>> >>>>>
_______________________________________________
>>>>> Kamailio (SER) - Users Mailing List
>>>>> sr-users(a)lists.kamailio.org
>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>> >>>>
_______________________________________________
>>>> Kamailio (SER) - Users Mailing List
>>>> sr-users(a)lists.kamailio.org
>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>> >> >>>
_______________________________________________
>>> Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>> >>> --
>>> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
>>> Funding: https://www.paypal.me/dcmierla
>> >>>
_______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>> >>
_______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> >
_______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
3:16 p.m.
How did you compile kamailio? The binaries do not contain the debugging
symbols...
Cheers,
Daniel
On 30.11.20 16:38, Carlos Vicente wrote:
I couldn't find any "-debug" packages,
so I compiled the latest version:
```
root@348cbcfcb96c:~# /usr/local/sbin/kamailio -v
version: kamailio 5.5.0-dev3 (arm/linux) d43163
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER,
USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: d43163
compiled on 15:17:51 Nov 30 2020 with gcc 9.3.0
```
But still not symbols:
```
root@348cbcfcb96c:~# gdb /usr/local/sbin/kamailio /cores/core.kamailio.19
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html <http://gnu.org/licenses/gpl.html>>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/
<http://www.gnu.org/software/gdb/bugs/>>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/
<http://www.gnu.org/software/gdb/documentation/>>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/local/sbin/kamailio...
(No debugging symbols found in /usr/local/sbin/kamailio)
[New LWP 19]
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/local/sbin/kamailio -f
/etc/kamailio/kamailio.cfg -DD -E -d'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x00b06320 in tsl ()
(gdb) bt full
#0 0x00b06320 in tsl ()
No symbol table info available.
#1 0x00b06380 in get_lock ()
No symbol table info available.
#2 0x00b1979c in qm_shm_malloc ()
No symbol table info available.
#3 0x009504dc in ksr_shutdown_phase_init ()
No symbol table info available.
#4 0x0078e3f4 in main ()
No symbol table info available.
(gdb) quit
```
TIA
cv
On Mon, Nov 30, 2020 at 9:33 AM Sergey Safarov <s.safarov(a)gmail.com
<mailto:s.safarov@gmail.com>> wrote:
Are you compiled Kamailio from sources?
If compiled from sources or installed "debug" files then pelase
show output of "bt full" command.
On Mon, Nov 30, 2020 at 5:23 PM Carlos Vicente
<cvicente.lists(a)gmail.com <mailto:cvicente.lists@gmail.com>> wrote:
Daniel,
Thank you. That finally helped getting the core file written.
Here is the gdb output:
```
root@6e5c06e979cf:/# gdb /usr/sbin/kamailio
/cores/core.kamailio.207
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
<http://gnu.org/licenses/gpl.html
<http://gnu.org/licenses/gpl.html>>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/
<http://www.gnu.org/software/gdb/bugs/>>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/
<http://www.gnu.org/software/gdb/documentation/>>.
For help, type "help".
Type "apropos word" to search for commands related to
"word"...
Reading symbols from /usr/sbin/kamailio...
(No debugging symbols found in /usr/sbin/kamailio)
[New LWP 207]
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/sbin/kamailio -f
/etc/kamailio/kamailio.cfg -DD -E -ddd'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x007d9cb8 in qm_shm_malloc ()
(gdb) bt
#0 0x007d9cb8 in qm_shm_malloc ()
#1 0x0061a58c in init_atomic_ops ()
#2 0x00562508 in main ()
```
What can be done about that?
cv
On Mon, Nov 30, 2020 at 4:29 AM Daniel-Constantin Mierla
<miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote:
Maybe the hints on stackoverflow are also useful:
*
https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-d…
<https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-docker-container>
Cheers,
Daniel
On 29.11.20 14:23, Sergey Safarov wrote:
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
you can change
set args -f /etc/kamailio/kamailio.cfg -D -d -E
To
set args -f /etc/kamailio/kamailio.cfg -DD -d -E
On Sun, Nov 29, 2020 at 4:14 PM Carlos Vicente
<cvicente.lists(a)gmail.com
<mailto:cvicente.lists@gmail.com>> wrote:
Thank you for your response.
I'm trying to run it under gdb but it's not doing
anything:
```
(gdb) exec-file /usr/sbin/kamailio
(gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
(gdb) run
Starting program: /usr/sbin/kamailio -f
/etc/kamailio/kamailio.cfg -D -d -E
warning: Error disabling address space randomization:
Success
```
It just stops there. Am I missing something?
cv
On Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov
<s.safarov(a)gmail.com <mailto:s.safarov@gmail.com>> wrote:
You can start kamailio under GDB debugger.
When issue reproduced, then you can get stack
trace and variables values
сб, 28 нояб. 2020 г., 18:35 Carlos Vicente
<cvicente.lists(a)gmail.com
<mailto:cvicente.lists@gmail.com>>:
Greetings,
I'm having a "fun" time trying to run
Kamailio inside a Docker container. It keeps
failing with:
0(238) DEBUG: <core> [core/mem/pkg.c:108]:
pkg_print_manager(): pkg - using memory
manager: q_malloc
0(238) DEBUG: <core> [core/mem/shm.c:300]:
shm_print_manager(): shm - using memory
manager: q_malloc
Illegal instruction (core dumped)
Unfortunately the core dump is nowhere to be
found. I have tried to follow the
instructions at:
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
<https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile>
but that hasn't helped.
The environment is as follows:
* Host hardware: Raspberry Pi 4 (4G memory)
* Host OS: Ubuntu 20.04.1 LTS
* Docker version 19.03.13
* Docker base image: arm32v7/ubuntu
root@2ef8a21534fa:/# kamailio -v
version: kamailio 5.3.2 (arm/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS,
USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY,
USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT-NOSMP,
USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES,
TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024,
MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE
1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt,
epoll_et, sigio_rt, select.
id: unknown
compiled with gcc 9.2.1
The config file passes the syntax check:
kamailio -c -f /etc/kamailio/kamailio.cfg
and, the most interesting part, if I run
Kamailio on the host machine, _with the exact
same config file_, it runs fine.
I'd appreciate any clues you may have. Thanks.
cv
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
--
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
<https://www.paypal.me/dcmierla>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
<https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
3:31 p.m.
Hi Daniel,
I followed this guide:
https://kamailio.org/docs/tutorials/5.5.x/kamailio-install-guide-git/
cv
On Mon, Nov 30, 2020 at 3:16 PM Daniel-Constantin Mierla <miconda(a)gmail.com>
wrote:
How did you compile kamailio? The binaries do not
contain the debugging
symbols...
Cheers,
Daniel
On 30.11.20 16:38, Carlos Vicente wrote:
I couldn't find any "-debug" packages, so I compiled the latest version:
```
root@348cbcfcb96c:~# /usr/local/sbin/kamailio -v
version: kamailio 5.5.0-dev3 (arm/linux) d43163
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024,
BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: d43163
compiled on 15:17:51 Nov 30 2020 with gcc 9.3.0
```
But still not symbols:
```
root@348cbcfcb96c:~# gdb /usr/local/sbin/kamailio /cores/core.kamailio.19
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <
http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/local/sbin/kamailio...
(No debugging symbols found in /usr/local/sbin/kamailio)
[New LWP 19]
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/local/sbin/kamailio -f
/etc/kamailio/kamailio.cfg -DD -E -d'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x00b06320 in tsl ()
(gdb) bt full
#0 0x00b06320 in tsl ()
No symbol table info available.
#1 0x00b06380 in get_lock ()
No symbol table info available.
#2 0x00b1979c in qm_shm_malloc ()
No symbol table info available.
#3 0x009504dc in ksr_shutdown_phase_init ()
No symbol table info available.
#4 0x0078e3f4 in main ()
No symbol table info available.
(gdb) quit
```
TIA
cv
On Mon, Nov 30, 2020 at 9:33 AM Sergey Safarov <s.safarov(a)gmail.com>
wrote:
Are you compiled Kamailio from sources?
If compiled from sources or installed "debug" files then pelase show
output of "bt full" command.
On Mon, Nov 30, 2020 at 5:23 PM Carlos Vicente <cvicente.lists(a)gmail.com>
wrote:
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
Daniel,
Thank you. That finally helped getting the core file written. Here is
the gdb output:
```
root@6e5c06e979cf:/# gdb /usr/sbin/kamailio /cores/core.kamailio.207
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <
http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/sbin/kamailio...
(No debugging symbols found in /usr/sbin/kamailio)
[New LWP 207]
[Thread debugging using libthread_db enabled]
Using host libthread_db library
"/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg
-DD -E -ddd'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x007d9cb8 in qm_shm_malloc ()
(gdb) bt
#0 0x007d9cb8 in qm_shm_malloc ()
#1 0x0061a58c in init_atomic_ops ()
#2 0x00562508 in main ()
```
What can be done about that?
cv
On Mon, Nov 30, 2020 at 4:29 AM Daniel-Constantin Mierla <
miconda(a)gmail.com> wrote:
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
Maybe the hints on stackoverflow are also
useful:
*
https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-d…
Cheers,
Daniel
On 29.11.20 14:23, Sergey Safarov wrote:
you can change
set args -f /etc/kamailio/kamailio.cfg -D -d -E
To
set args -f /etc/kamailio/kamailio.cfg -DD -d -E
On Sun, Nov 29, 2020 at 4:14 PM Carlos Vicente <
cvicente.lists(a)gmail.com> wrote:
> Thank you for your response.
>
> I'm trying to run it under gdb but it's not doing anything:
>
> ```
> (gdb) exec-file /usr/sbin/kamailio
> (gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
> (gdb) run
> Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -D
> -d -E
> warning: Error disabling address space randomization: Success
> ```
>
> It just stops there. Am I missing something?
>
> cv
>
> On Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov <s.safarov(a)gmail.com>
> wrote:
>
>> You can start kamailio under GDB debugger.
>> When issue reproduced, then you can get stack trace and variables
>> values
>>
>>
>> сб, 28 нояб. 2020 г., 18:35 Carlos Vicente <cvicente.lists(a)gmail.com
>> >:
>>
>>> Greetings,
>>>
>>> I'm having a "fun" time trying to run Kamailio inside a Docker
>>> container. It keeps failing with:
>>>
>>> 0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg
>>> - using memory manager: q_malloc
>>> 0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager(): shm
>>> - using memory manager: q_malloc
>>> Illegal instruction (core dumped)
>>>
>>> Unfortunately the core dump is nowhere to be found. I have tried to
>>> follow the instructions at:
>>>
>>>
>>> https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
>>>
>>> but that hasn't helped.
>>>
>>> The environment is as follows:
>>>
>>> * Host hardware: Raspberry Pi 4 (4G memory)
>>> * Host OS: Ubuntu 20.04.1 LTS
>>> * Docker version 19.03.13
>>> * Docker base image: arm32v7/ubuntu
>>>
>>> root@2ef8a21534fa:/# kamailio -v
>>> version: kamailio 5.3.2 (arm/linux)
>>> flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS,
>>> DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC,
>>> F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX,
>>> FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
>>> USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
>>> ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE
>>> 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB
>>> poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
>>> id: unknown
>>> compiled with gcc 9.2.1
>>>
>>> The config file passes the syntax check:
>>>
>>> kamailio -c -f /etc/kamailio/kamailio.cfg
>>>
>>> and, the most interesting part, if I run Kamailio on the host
>>> machine, _with the exact same config file_, it runs fine.
>>>
>>> I'd appreciate any clues you may have. Thanks.
>>>
>>> cv
>>>
>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users(a)lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users(a)lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users(a)lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
_______________________________________________
Kamailio (SER) - Users Mailing
Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda --
www.linkedin.com/in/miconda
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users(a)lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
3:39 p.m.
Hello,
it might be something related to the ARM compilation, that maybe the build system does not
generate proper debug symbols here.
I need to check on my Rasberries as well, but do not remember problems last time I
compiled it there.
Cheers,
Henning
--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>
From: sr-users <sr-users-bounces(a)lists.kamailio.org> On Behalf Of Carlos Vicente
Sent: Monday, November 30, 2020 9:32 PM
To: miconda(a)gmail.com
Cc: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org>
Subject: Re: [SR-Users] core dump error when running under docker
Hi Daniel,
I followed this guide:
https://kamailio.org/docs/tutorials/5.5.x/kamailio-install-guide-git/
cv
On Mon, Nov 30, 2020 at 3:16 PM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
How did you compile kamailio? The binaries do not contain the debugging symbols...
Cheers,
Daniel
On 30.11.20 16:38, Carlos Vicente wrote:
I couldn't find any "-debug" packages, so I compiled the latest version:
```
root@348cbcfcb96c:~# /usr/local/sbin/kamailio -v
version: kamailio 5.5.0-dev3 (arm/linux) d43163
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY,
USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535,
DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: d43163
compiled on 15:17:51 Nov 30 2020 with gcc 9.3.0
```
But still not symbols:
```
root@348cbcfcb96c:~# gdb /usr/local/sbin/kamailio /cores/core.kamailio.19
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/local/sbin/kamailio...
(No debugging symbols found in /usr/local/sbin/kamailio)
[New LWP 19]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/local/sbin/kamailio -f /etc/kamailio/kamailio.cfg -DD -E
-d'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x00b06320 in tsl ()
(gdb) bt full
#0 0x00b06320 in tsl ()
No symbol table info available.
#1 0x00b06380 in get_lock ()
No symbol table info available.
#2 0x00b1979c in qm_shm_malloc ()
No symbol table info available.
#3 0x009504dc in ksr_shutdown_phase_init ()
No symbol table info available.
#4 0x0078e3f4 in main ()
No symbol table info available.
(gdb) quit
```
TIA
cv
On Mon, Nov 30, 2020 at 9:33 AM Sergey Safarov
<s.safarov@gmail.com<mailto:s.safarov@gmail.com>> wrote:
Are you compiled Kamailio from sources?
If compiled from sources or installed "debug" files then pelase show output of
"bt full" command.
On Mon, Nov 30, 2020 at 5:23 PM Carlos Vicente
<cvicente.lists@gmail.com<mailto:cvicente.lists@gmail.com>> wrote:
Daniel,
Thank you. That finally helped getting the core file written. Here is the gdb output:
```
root@6e5c06e979cf:/# gdb /usr/sbin/kamailio /cores/core.kamailio.207
GNU gdb (Ubuntu 9.2-0ubuntu1~20.04) 9.2
Copyright (C) 2020 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "arm-linux-gnueabihf".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/sbin/kamailio...
(No debugging symbols found in /usr/sbin/kamailio)
[New LWP 207]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/arm-linux-gnueabihf/libthread_db.so.1".
Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -DD -E
-ddd'.
Program terminated with signal SIGILL, Illegal instruction.
#0 0x007d9cb8 in qm_shm_malloc ()
(gdb) bt
#0 0x007d9cb8 in qm_shm_malloc ()
#1 0x0061a58c in init_atomic_ops ()
#2 0x00562508 in main ()
```
What can be done about that?
cv
On Mon, Nov 30, 2020 at 4:29 AM Daniel-Constantin Mierla
<miconda@gmail.com<mailto:miconda@gmail.com>> wrote:
Maybe the hints on stackoverflow are also useful:
*
https://stackoverflow.com/questions/28335614/how-to-generate-core-file-in-d…
Cheers,
Daniel
On 29.11.20 14:23, Sergey Safarov wrote:
you can change
set args -f /etc/kamailio/kamailio.cfg -D -d -E
To
set args -f /etc/kamailio/kamailio.cfg -DD -d -E
On Sun, Nov 29, 2020 at 4:14 PM Carlos Vicente
<cvicente.lists@gmail.com<mailto:cvicente.lists@gmail.com>> wrote:
Thank you for your response.
I'm trying to run it under gdb but it's not doing anything:
```
(gdb) exec-file /usr/sbin/kamailio
(gdb) set args -f /etc/kamailio/kamailio.cfg -D -d -E
(gdb) run
Starting program: /usr/sbin/kamailio -f /etc/kamailio/kamailio.cfg -D -d -E
warning: Error disabling address space randomization: Success
```
It just stops there. Am I missing something?
cv
On Sat, Nov 28, 2020 at 11:37 AM Sergey Safarov
<s.safarov@gmail.com<mailto:s.safarov@gmail.com>> wrote:
You can start kamailio under GDB debugger.
When issue reproduced, then you can get stack trace and variables values
сб, 28 нояб. 2020 г., 18:35 Carlos Vicente
<cvicente.lists@gmail.com<mailto:cvicente.lists@gmail.com>>:
Greetings,
I'm having a "fun" time trying to run Kamailio inside a Docker container. It
keeps failing with:
0(238) DEBUG: <core> [core/mem/pkg.c:108]: pkg_print_manager(): pkg - using memory
manager: q_malloc
0(238) DEBUG: <core> [core/mem/shm.c:300]: shm_print_manager(): shm - using memory
manager: q_malloc
Illegal instruction (core dumped)
Unfortunately the core dump is nowhere to be found. I have tried to follow the
instructions at:
https://www.kamailio.org/wiki/tutorials/troubleshooting/coredumpfile
but that hasn't helped.
The environment is as follows:
* Host hardware: Raspberry Pi 4 (4G memory)
* Host OS: Ubuntu 20.04.1 LTS
* Docker version 19.03.13
* Docker base image: arm32v7/ubuntu
root@2ef8a21534fa:/# kamailio -v
version: kamailio 5.3.2 (arm/linux)
flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST,
DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY,
USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT-NOSMP, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR,
USE_DST_BLACKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED
ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535,
DEFAULT PKG_SIZE 8MB
poll method support: poll, epoll_lt, epoll_et, sigio_rt, select.
id: unknown
compiled with gcc 9.2.1
The config file passes the syntax check:
kamailio -c -f /etc/kamailio/kamailio.cfg
and, the most interesting part, if I run Kamailio on the host machine, _with the exact
same config file_, it runs fine.
I'd appreciate any clues you may have. Thanks.
cv
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> --
www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Funding: https://www.paypal.me/dcmierla
1506
days inactive
1508
days old
10 comments
4 participants
participants (4)
-
Carlos Vicente -
Daniel-Constantin Mierla -
Henning Westerholt -
Sergey Safarov