19 Jun
2006
19 Jun
'06
4:38 p.m.
Hello,
I am using SER-0.9.6. How to send instant message programmatically, how
to build sip message and which function can by used(like t_uac,
t_request).
Can you help where and which to be changed in ser code.
Thank you,
Regards,
Sriram Srinivas.
The information contained in this electronic message and any attachments to this message
are intended for the exclusive use of the addressee(s) and may contain proprietary,
confidential or privileged information. If you are not the intended recipient, you should
not disseminate, distribute or copy this e-mail. Please notify the sender immediately and
destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient should check this
email and any attachments for the presence of viruses. The company accepts no liability
for any damage caused by any virus transmitted by this email.
www.wipro.com
19 Jun
19 Jun
5:04 p.m.
You are better off generating the message outside SER. SER is not a UAS.
Have a look at sipsak or sipp (both found at sourceforge, I think).
g-)
srinivas.sriram(a)wipro.com wrote:
Hello,
I am using SER-0.9.6. How to send instant message programmatically,
how to build sip message and which function can by used(like t_uac,
t_request).
Can you help where and which to be changed in ser code.
Thank you,
Regards,
Sriram Srinivas.
The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of the
addressee(s) and may contain proprietary, confidential or privileged
information. If you are not the intended recipient, you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any
virus transmitted by this email.
www.wipro.com
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
20 Jul
20 Jul
1:44 a.m.
Also check out the fifo interface to the TM module, it allows you to
generate a message and inject it for processing from the command line by
writing to the fifo ser opens. And I quote:
1.4.18. External Usage of TM
There are applications which would like to generate SIP
transactions without too big involvement in SIP stack,
transaction management, etc. An example of such an application
is sending instant messages from a website. To address needs
of such apps, SER accepts requests for new transactions via
fifo pipes too. If you want to enable this feature, start FIFO
server with configuration option.
fifo="/tmp/ser_fifo"
Then, an application can easily launch a new transaction by
writing a transaction request to this named pipe. The request
must follow very simple format, which is
:t_uac_from:[<file_name>]\n
<method>\n
<sender's uri>\n
<dst uri>\n
<CR_separated_headers>\n
<body>\n
.\n
\n
(Filename is to where a report will be dumped. ser assumes
/tmp as file's directory.)
Note the the request write must be atomic, otherwise it might
get intermixed with writes from other writers. You can easily
use it via Unix command-line tools, see the following example:
[jiri@bat jiri]$ cat > /tmp/ser_fifo
:t_uac_from:xxx
MESSAGE
sip:sender@iptel.org
sip:mrx@iptel.org
header:value
foo:bar
bznk:hjhjk
p_header: p_value
body body body
yet body
end of body
.
or cat test/transaction.fifo > /tmp/ser_fifo
-Evan
Greger V. Teigre wrote:
You are better off generating the message outside SER.
SER is not a UAS.
Have a look at sipsak or sipp (both found at sourceforge, I think).
g-)
srinivas.sriram(a)wipro.com wrote:
Hello,
I am using SER-0.9.6. How to send instant message programmatically,
how to build sip message and which function can by used(like t_uac,
t_request).
Can you help where and which to be changed in ser code.
Thank you,
Regards,
Sriram Srinivas.
The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of the
addressee(s) and may contain proprietary, confidential or privileged
information. If you are not the intended recipient, you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by any
virus transmitted by this email.
www.wipro.com
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
1:51 a.m.
I have no idea what's wrong with me, my email client and/or my imap
store. When I opened this folder it told me that Greger's initial reply
was from Today and was un-read. After I sent my reply it decided to
reload the folder and show me it was from June 16th... whoops.
-Evan
Evan Borgström wrote:
Also check out the fifo interface to the TM module, it allows you to
generate a message and inject it for processing from the command line by
writing to the fifo ser opens. And I quote:
1.4.18. External Usage of TM
There are applications which would like to generate SIP
transactions without too big involvement in SIP stack,
transaction management, etc. An example of such an application
is sending instant messages from a website. To address needs
of such apps, SER accepts requests for new transactions via
fifo pipes too. If you want to enable this feature, start FIFO
server with configuration option.
fifo="/tmp/ser_fifo"
Then, an application can easily launch a new transaction by
writing a transaction request to this named pipe. The request
must follow very simple format, which is
:t_uac_from:[<file_name>]\n
<method>\n
<sender's uri>\n
<dst uri>\n
<CR_separated_headers>\n
<body>\n
.\n
\n
(Filename is to where a report will be dumped. ser assumes
/tmp as file's directory.)
Note the the request write must be atomic, otherwise it might
get intermixed with writes from other writers. You can easily
use it via Unix command-line tools, see the following example:
[jiri@bat jiri]$ cat > /tmp/ser_fifo
:t_uac_from:xxx
MESSAGE
sip:sender@iptel.org
sip:mrx@iptel.org
header:value
foo:bar
bznk:hjhjk
p_header: p_value
body body body
yet body
end of body
.
or cat test/transaction.fifo > /tmp/ser_fifo
-Evan
Greger V. Teigre wrote:
You are better off generating the message outside
SER. SER is not a
UAS. Have a look at sipsak or sipp (both found at sourceforge, I think).
g-)
srinivas.sriram(a)wipro.com wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hello,
I am using SER-0.9.6. How to send instant message programmatically,
how to build sip message and which function can by used(like t_uac,
t_request).
Can you help where and which to be changed in ser code.
Thank you,
Regards,
Sriram Srinivas.
The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of the
addressee(s) and may contain proprietary, confidential or privileged
information. If you are not the intended recipient, you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately and destroy all copies of this message and any attachments.
WARNING: Computer viruses can be transmitted via email. The recipient
should check this email and any attachments for the presence of
viruses. The company accepts no liability for any damage caused by
any virus transmitted by this email.
www.wipro.com
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
21 Jul
21 Jul
2:45 p.m.
Relevant all the same, Evan. ;-)
g-)
Evan Borgström wrote:
I have no idea what's wrong with me, my email client and/or my
imap store. When I opened this folder it told me that Greger's initial
reply was from Today and was un-read. After I sent my reply it decided
to reload the folder and show me it was from June 16th... whoops.
-Evan
Evan Borgström wrote:
Also check out the fifo interface to the TM module, it allows you
to generate a message and inject it for processing from the command
line by writing to the fifo ser opens. And I quote:
1.4.18. External Usage of TM
There are applications which would like to generate SIP
transactions without too big involvement in SIP stack,
transaction management, etc. An example of such an application
is sending instant messages from a website. To address needs
of such apps, SER accepts requests for new transactions via
fifo pipes too. If you want to enable this feature, start FIFO
server with configuration option.
fifo="/tmp/ser_fifo"
Then, an application can easily launch a new transaction by
writing a transaction request to this named pipe. The request
must follow very simple format, which is
:t_uac_from:[<file_name>]\n
<method>\n
<sender's uri>\n
<dst uri>\n
<CR_separated_headers>\n
<body>\n
.\n
\n
(Filename is to where a report will be dumped. ser assumes
/tmp as file's directory.)
Note the the request write must be atomic, otherwise it might
get intermixed with writes from other writers. You can easily
use it via Unix command-line tools, see the following example:
[jiri@bat jiri]$ cat > /tmp/ser_fifo
:t_uac_from:xxx
MESSAGE
sip:sender@iptel.org
sip:mrx@iptel.org
header:value
foo:bar
bznk:hjhjk
p_header: p_value
body body body
yet body
end of body
.
or cat test/transaction.fifo > /tmp/ser_fifo
-Evan
Greger V. Teigre wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
You are better off generating the message outside
SER. SER is not a
UAS. Have a look at sipsak or sipp (both found at sourceforge, I
think).
g-)
srinivas.sriram(a)wipro.com wrote:
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hello,
I am using SER-0.9.6. How to send instant message
programmatically, how to build sip message and which function can
by used(like t_uac, t_request).
Can you help where and which to be changed in ser code.
Thank you,
Regards,
Sriram Srinivas.
The information contained in this electronic message and any
attachments to this message are intended for the exclusive use of
the addressee(s) and may contain proprietary, confidential or
privileged information. If you are not the intended recipient, you
should not disseminate, distribute or copy this e-mail. Please
notify the sender immediately and destroy all copies of this
message and any attachments.
WARNING: Computer viruses can be transmitted via email. The
recipient should check this email and any attachments for the
presence of viruses. The company accepts no liability for any
damage caused by any virus transmitted by this email.
www.wipro.com
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
------------------------------------------------------------------------
_______________________________________________
Serusers mailing list
Serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6500
days inactive
6532
days old
4 comments
3 participants
participants (3)
-
Evan Borgström -
Greger V. Teigre -
srinivas.sriram＠wipro.com