No,

DBURL translates into

"mysql://user:admin@dbuser/dbname"

so in sqlops:

modparam("sqlops","sqlcon","cb=>DBURL")

translates into:

modparam("sqlops","sqlcon","cb=>"mysql://user:admin@dbuser/dbname"")

that works great on

modparam("domain", "db_url", DBURL)

because it translates into:

modparam("domain", "db_url", "mysql://user:admin@dbuser/dbname")

But not on the sqlops case

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sat, May 11, 2019 at 12:32 AM Sergiu Pojoga pojogas@gmail.com wrote:

You've got a typo

modparam("sqlops","sqlcon","cb=>DBURL")

On Fri, May 10, 2019 at 7:02 PM David Villasmil < david.villasmil.work@gmail.com> wrote:

...

Hello guys,

So, i'm defining:

DBURL "mysql://user:password@dbhost/dbname"

and later on...

modparam("sqlops","sqlcon","cb=>"DBURL)

and this fails miserably..

What do do on this case?

Thanks all!

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

yes that works.

My problem is not with sqlops.

My problem is with the DEFINE.

If I define:

#!define DBURL "mysql://user:password@localhost/dbname"

and later:

modparam("domain", "db_url", DBURL)

and then:

modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

Everything works properly.

My problem is how to use that DEFINE on ALL instances where i need to use it. i.e.

#!define DBURL "mysql://user:password@localhost/dbname" modparam("domain", "db_url", DBURL) modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

works, but;

#!define DBURL © modparam("domain", "db_url", DBURL) modparam("sqlops","sqlcon","cb=>DBURL")

does NOT, since DBURL translates "mysql://user:password@localhost/dbname" (quotes included)

so modparam("sqlops","sqlcon","cb=>DBURL") translates into modparam("sqlops","sqlcon","cb=>"mysql://user:password@localhost/dbname"")

and that, of course, fails.

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sat, May 11, 2019 at 12:59 AM Sergiu Pojoga pojogas@gmail.com wrote:

does is work like below? That's how mine is set, probably for the same reason.

modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

On Fri, May 10, 2019 at 7:47 PM David Villasmil < david.villasmil.work@gmail.com> wrote:

...

No,

DBURL translates into

"mysql://user:admin@dbuser/dbname"

so in sqlops:

modparam("sqlops","sqlcon","cb=>DBURL")

translates into:

modparam("sqlops","sqlcon","cb=>"mysql://user:admin@dbuser/dbname"")

that works great on

modparam("domain", "db_url", DBURL)

because it translates into:

modparam("domain", "db_url", "mysql://user:admin@dbuser/dbname")

But not on the sqlops case

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sat, May 11, 2019 at 12:32 AM Sergiu Pojoga pojogas@gmail.com wrote:

...

You've got a typo

modparam("sqlops","sqlcon","cb=>DBURL")

On Fri, May 10, 2019 at 7:02 PM David Villasmil < david.villasmil.work@gmail.com> wrote:

...

Hello guys,

So, i'm defining:

DBURL "mysql://user:password@dbhost/dbname"

and later on...

modparam("sqlops","sqlcon","cb=>"DBURL)

and this fails miserably..

What do do on this case?

Thanks all!

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

Thanks Daniel;

The thing is I’m trying to implement password-less starts (no hardcoded password)

So I’m querying the password on start from aws ssm and injecting it as a define, like.

Kamailio -f kamailio.cfg -A “DBURL `script-than-returns-MySQL-dburl-lambda.sh`“

Is it possible to do substrdef from the command line?

Better yet, do you have a different. Approach to doing this?

David

On Sat, 11 May 2019 at 07:12, Daniel-Constantin Mierla miconda@gmail.com wrote:

Hello,

use:

#!substdef "!DBURL!mysql://user:password@localhost/dbname!"

The define is replacing only standalone tokens, not inside string values, like you have for sqlcon.

More docs about should be in core cookbook from wiki.

Cheers, Daniel On 11.05.19 02:05, David Villasmil wrote:

yes that works.

My problem is not with sqlops.

My problem is with the DEFINE.

If I define:

#!define DBURL "mysql://user:password@localhost/dbname"

and later:

modparam("domain", "db_url", DBURL)

and then:

modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

Everything works properly.

My problem is how to use that DEFINE on ALL instances where i need to use it. i.e.

#!define DBURL "mysql://user:password@localhost/dbname" modparam("domain", "db_url", DBURL) modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

works, but;

#!define DBURL © modparam("domain", "db_url", DBURL) modparam("sqlops","sqlcon","cb=>DBURL")

does NOT, since DBURL translates "mysql://user:password@localhost/dbname" (quotes included)

so modparam("sqlops","sqlcon","cb=>DBURL") translates into modparam("sqlops","sqlcon","cb=>"mysql://user:password@localhost/dbname"")

and that, of course, fails.

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sat, May 11, 2019 at 12:59 AM Sergiu Pojoga pojogas@gmail.com wrote:

...

does is work like below? That's how mine is set, probably for the same reason.

modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

On Fri, May 10, 2019 at 7:47 PM David Villasmil < david.villasmil.work@gmail.com> wrote:

...

No,

DBURL translates into

"mysql://user:admin@dbuser/dbname"

so in sqlops:

modparam("sqlops","sqlcon","cb=>DBURL")

translates into:

modparam("sqlops","sqlcon","cb=>"mysql://user:admin@dbuser/dbname"")

that works great on

modparam("domain", "db_url", DBURL)

because it translates into:

modparam("domain", "db_url", "mysql://user:admin@dbuser/dbname")

But not on the sqlops case

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sat, May 11, 2019 at 12:32 AM Sergiu Pojoga pojogas@gmail.com wrote:

...

You've got a typo

modparam("sqlops","sqlcon","cb=>DBURL")

On Fri, May 10, 2019 at 7:02 PM David Villasmil < david.villasmil.work@gmail.com> wrote:

...

Hello guys,

So, i'm defining:

DBURL "mysql://user:password@dbhost/dbname"

and later on...

modparam("sqlops","sqlcon","cb=>"DBURL)

and this fails miserably..

What do do on this case?

Thanks all!

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda

--

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

This fails miserably:

kamailio -f /etc/kamailio/kamailio.cfg -E \ -A "DBURL mysql://admin:mypass@db.mydomaincom/kamailio" \ -A "CBDBURL cb=>mysql://admin:mypass@db.mydomaincom/kamailio" \ -A "ASGDBURL asg=>mysql://admin:mypass@db.mydomaincom/kamailio" -DDDD

modparam("sqlops","sqlcon", CBDBURL)

As does this:

kamailio -f /etc/kamailio/kamailio.cfg -E \ -A "DBURL mysql://admin:mypass@db.mydomaincom/kamailio" \ -A "CBDBURL cb=>mysql://admin:mypass@db.mydomaincom/kamailio" \ -A "ASGDBURL asg=>mysql://admin:mypass@db.mydomaincom/kamailio" -DDDD

cfg

modparam("sqlops","sqlcon", "CBDBURL") ... $var(rows)=$sqlrows(cb);

When running:

0(27514) CRITICAL: <core> [core/cfg.y:3424]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1200, column 13-24: Can't get from cache: $sqlrows(cb)

while hardcoded does work...

Don't really know where to go from here... It seems sqlops just doesn't take a define as the dburl source

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sun, May 12, 2019 at 8:38 AM Daniel-Constantin Mierla miconda@gmail.com wrote:

Try first something like:

modparam("sqlops","sqlcon","cb=>" DBURL )

If doesn't work, then:

modparam("sqlops","sqlcon", CBDBURL)

and have -A twice, one for DBURL and another one for CBDBURL.

The latest dev version (iirc) has the option to evaluate variables in the defines, so you can use there the environment pseudo-variables.

Cheers, Daniel On 11.05.19 11:56, David Villasmil wrote:

Thanks Daniel;

The thing is I’m trying to implement password-less starts (no hardcoded password)

So I’m querying the password on start from aws ssm and injecting it as a define, like.

Kamailio -f kamailio.cfg -A “DBURL `script-than-returns-MySQL-dburl-lambda.sh`“

Is it possible to do substrdef from the command line?

Better yet, do you have a different. Approach to doing this?

David

On Sat, 11 May 2019 at 07:12, Daniel-Constantin Mierla miconda@gmail.com wrote:

...

Hello,

use:

#!substdef "!DBURL!mysql://user:password@localhost/dbname!"

The define is replacing only standalone tokens, not inside string values, like you have for sqlcon.

More docs about should be in core cookbook from wiki.

Cheers, Daniel On 11.05.19 02:05, David Villasmil wrote:

yes that works.

My problem is not with sqlops.

My problem is with the DEFINE.

If I define:

#!define DBURL "mysql://user:password@localhost/dbname"

and later:

modparam("domain", "db_url", DBURL)

and then:

modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

Everything works properly.

My problem is how to use that DEFINE on ALL instances where i need to use it. i.e.

#!define DBURL "mysql://user:password@localhost/dbname" modparam("domain", "db_url", DBURL) modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

works, but;

#!define DBURL © modparam("domain", "db_url", DBURL) modparam("sqlops","sqlcon","cb=>DBURL")

does NOT, since DBURL translates "mysql://user:password@localhost/dbname" (quotes included)

so modparam("sqlops","sqlcon","cb=>DBURL") translates into modparam("sqlops","sqlcon","cb=>"mysql://user:password@localhost/dbname" ")

and that, of course, fails.

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sat, May 11, 2019 at 12:59 AM Sergiu Pojoga pojogas@gmail.com wrote:

...

does is work like below? That's how mine is set, probably for the same reason.

modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

On Fri, May 10, 2019 at 7:47 PM David Villasmil < david.villasmil.work@gmail.com> wrote:

...

No,

DBURL translates into

"mysql://user:admin@dbuser/dbname"

so in sqlops:

modparam("sqlops","sqlcon","cb=>DBURL")

translates into:

modparam("sqlops","sqlcon","cb=>"mysql://user:admin@dbuser/dbname"")

that works great on

modparam("domain", "db_url", DBURL)

because it translates into:

modparam("domain", "db_url", "mysql://user:admin@dbuser/dbname")

But not on the sqlops case

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

On Sat, May 11, 2019 at 12:32 AM Sergiu Pojoga pojogas@gmail.com wrote:

...

You've got a typo

modparam("sqlops","sqlcon","cb=>DBURL")

On Fri, May 10, 2019 at 7:02 PM David Villasmil < david.villasmil.work@gmail.com> wrote:

...

Hello guys,

So, i'm defining:

DBURL "mysql://user:password@dbhost/dbname"

and later on...

modparam("sqlops","sqlcon","cb=>"DBURL)

and this fails miserably..

What do do on this case?

Thanks all!

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

---

Kamailio (SER) - Users Mailing Listsr-users@lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

-- Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda

--

Regards,

David Villasmil email: david.villasmil.work@gmail.com phone: +34669448337

-- Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda

Hello,

for convenience, I added command line parameters to set #!subst, #!substdef and #!substdefs expressions - details about them in the wiki:

* https://www.kamailio.org/wiki/cookbooks/devel/core#subst

It is only in master branch, being new features, but maybe you can test and report if they work fine. It should be like:

kamailio --subst="%DBURL%mysql://admin:mypass@db.mydomaincom/kamailio%" ...

And in kamailio.cfg:

modparam("acc", "db_url", "DBURL") ... modparam("sqlops","sqlcon", "cb=>DBURL") ... modparam("sqlops","sqlcon", "asg=>DBURL")

Cheers, Daniel

On 12.05.19 23:51, David Villasmil wrote:

Finally figured out how to do it:

cfg: modparam("acc", "db_url", DBURL) ... modparam("sqlops","sqlcon", CBDBURL) ... modparam("sqlops","sqlcon", ASGDBURL)

and startup:

kamailio -f /etc/kamailio/kamailio.cfg -E  \   -A 'DBURL="mysql://admin:mypass@db.mydomaincom/kamailio"' \   -A "CBDBURL="cb=>admin:mypass@db.mydomaincom/kamailio"" \   -A 'ASGDBURL="asg=>admin:mypass@db.mydomaincom/kamailio"' -DDDD 2>&1

Now let's try and put that on the startup systemd script.

Hello,

I added some examples in master branch about using -A to define tokens with values, I noticed it was not properly documented, it has to be like:

-A TOKEN

-A 'TOKEN=val'

-A 'TOKEN="val"'

a matter of needing the value to be surrounded by the double quotes or not.

Cheers, Daniel

On 12.05.19 22:32, David Villasmil wrote:

This fails miserably:

kamailio -f /etc/kamailio/kamailio.cfg -E \   -A "DBURL mysql://admin:mypass@db.mydomaincom/kamailio" \   -A "CBDBURL cb=>mysql://admin:mypass@db.mydomaincom/kamailio" \   -A "ASGDBURL asg=>mysql://admin:mypass@db.mydomaincom/kamailio" -DDDD

modparam("sqlops","sqlcon", CBDBURL)

As does this:

kamailio -f /etc/kamailio/kamailio.cfg -E \   -A "DBURL mysql://admin:mypass@db.mydomaincom/kamailio" \   -A "CBDBURL cb=>mysql://admin:mypass@db.mydomaincom/kamailio" \   -A "ASGDBURL asg=>mysql://admin:mypass@db.mydomaincom/kamailio" -DDDD

cfg

modparam("sqlops","sqlcon", "CBDBURL") ... $var(rows)=$sqlrows(cb);

When running:

0(27514) CRITICAL: <core> [core/cfg.y:3424]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 1200, column 13-24: Can't get from cache: $sqlrows(cb)

while hardcoded does work...

Don't really know where to go from here... It seems sqlops just doesn't take a define as the dburl source

Regards,

David Villasmil email: david.villasmil.work@gmail.com mailto:david.villasmil.work@gmail.com phone: +34669448337

On Sun, May 12, 2019 at 8:38 AM Daniel-Constantin Mierla <miconda@gmail.com mailto:miconda@gmail.com> wrote:

Try first something like:

modparam("sqlops","sqlcon","cb=>" DBURL )

If doesn't work, then:

modparam("sqlops","sqlcon", CBDBURL)

and have -A twice, one for DBURL and another one for CBDBURL.

The latest dev version (iirc) has the option to evaluate variables
in the defines, so you can use there the environment pseudo-variables.

Cheers,
Daniel

On 11.05.19 11:56, David Villasmil wrote:

...

Thanks Daniel;

The thing is I’m trying to implement password-less starts (no
hardcoded password)

So I’m querying the password on start from aws ssm and injecting
it as a define, like.

Kamailio -f kamailio.cfg -A “DBURL
`script-than-returns-MySQL-dburl-lambda.sh`“

Is it  possible to do substrdef from the command line?

Better yet, do you have a different. Approach to doing this?

David



On Sat, 11 May 2019 at 07:12, Daniel-Constantin Mierla
<miconda@gmail.com <mailto:miconda@gmail.com>> wrote:

    Hello,

    use:

    #!substdef "!DBURL!mysql://user:password@localhost/dbname!"

    The define is replacing only standalone tokens, not inside
    string values, like you have for sqlcon.

    More docs about should be in core cookbook from wiki.

    Cheers,
    Daniel

    On 11.05.19 02:05, David Villasmil wrote:

...

    yes that works.

    My problem is not with sqlops.

    My problem is with the DEFINE.

    If I define:

    #!define DBURL "mysql://user:password@localhost/dbname"

    and later:

    modparam("domain", "db_url", DBURL)

    and then:

    modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

    Everything works properly.


    My problem is how to use that DEFINE on ALL instances where
    i need to use it.
    i.e.

    #!define DBURL "mysql://user:password@localhost/dbname"
    modparam("domain", "db_url", DBURL)
    modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

    works, but;

    #!define DBURL ©
    modparam("domain", "db_url", DBURL)
    modparam("sqlops","sqlcon","cb=>DBURL")

    does NOT, since
    DBURL translates "mysql://user:password@localhost/dbname"
    (quotes included)

    so 
    modparam("sqlops","sqlcon","cb=>DBURL")
    translates into
    modparam("sqlops","sqlcon","cb=>"mysql://user:password@localhost/dbname"")

    and that, of course, fails.




    Regards,

    David Villasmil
    email: david.villasmil.work@gmail.com
    <mailto:david.villasmil.work@gmail.com>
    phone: +34669448337


    On Sat, May 11, 2019 at 12:59 AM Sergiu Pojoga
    <pojogas@gmail.com <mailto:pojogas@gmail.com>> wrote:

        does is work like below? That's how mine is set,
        probably for the same reason.

        modparam("sqlops","sqlcon","cb=>mysql://user:password@localhost/dbname")

        On Fri, May 10, 2019 at 7:47 PM David Villasmil
        <david.villasmil.work@gmail.com
        <mailto:david.villasmil.work@gmail.com>> wrote:

            No, 

            DBURL translates into 

            "mysql://user:admin@dbuser/dbname"

            so in sqlops:

            modparam("sqlops","sqlcon","cb=>DBURL")  

            translates into:

            modparam("sqlops","sqlcon","cb=>"mysql://user:admin@dbuser/dbname"")  

            that works great on 

            modparam("domain", "db_url", DBURL)

            because it translates into:

            modparam("domain",
            "db_url", "mysql://user:admin@dbuser/dbname")



            But not on the sqlops case

            Regards,

            David Villasmil
            email: david.villasmil.work@gmail.com
            <mailto:david.villasmil.work@gmail.com>
            phone: +34669448337


            On Sat, May 11, 2019 at 12:32 AM Sergiu Pojoga
            <pojogas@gmail.com <mailto:pojogas@gmail.com>> wrote:

                You've got a typo

                modparam("sqlops","sqlcon","cb=>DBURL")  

                On Fri, May 10, 2019 at 7:02 PM David Villasmil
                <david.villasmil.work@gmail.com
                <mailto:david.villasmil.work@gmail.com>> wrote:

                    Hello guys,

                    So, i'm defining:

                    DBURL "mysql://user:password@dbhost/dbname"

                    and later on...

                    modparam("sqlops","sqlcon","cb=>"DBURL)

                    and this fails miserably..

                    What do do on this case?


                    Thanks all!

                    Regards,

                    David Villasmil
                    email: david.villasmil.work@gmail.com
                    <mailto:david.villasmil.work@gmail.com>
                    phone: +34669448337
                    _______________________________________________
                    Kamailio (SER) - Users Mailing List
                    sr-users@lists.kamailio.org
                    <mailto:sr-users@lists.kamailio.org>
                    https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

                _______________________________________________
                Kamailio (SER) - Users Mailing List
                sr-users@lists.kamailio.org
                <mailto:sr-users@lists.kamailio.org>
                https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

            _______________________________________________
            Kamailio (SER) - Users Mailing List
            sr-users@lists.kamailio.org
            <mailto:sr-users@lists.kamailio.org>
            https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

        _______________________________________________
        Kamailio (SER) - Users Mailing List
        sr-users@lists.kamailio.org
        <mailto:sr-users@lists.kamailio.org>
        https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


    _______________________________________________
    Kamailio (SER) - Users Mailing List
    sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
    https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

    -- 
    Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
    www.twitter.com/miconda <http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>

-- 
Regards,

David Villasmil
email: david.villasmil.work@gmail.com
<mailto:david.villasmil.work@gmail.com>
phone: +34669448337

-- 
Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
www.twitter.com/miconda <http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>