16 Nov
2005
16 Nov
'05
6:53 p.m.
THAT'S not too bad.
Basically, what they dial will be the RURI.
So if they dial *21*1*5551212 your SIP RURI becomes sip:*21*1*5551212@your.server
All you'd need is a check for the URI and then strip out the unnecessary bits
and use something like an AVPop to store the db info... something like:
(note, I'm just tossing stuff out for an idea... this syntax may be completely
wrong)
if(uri =~ "^sip:\*21\*1")
{
strip(6);
avp_write("$ruri","i:19");
....
avp_db_store("$from/username", "i:19/usr_preferences");
};
Or some such (as I say, I'm playing loose and fast with syntax here)...
N.
On Wed, 16 Nov 2005 17:30:16 +0200, Kyriakos Mavromichalis wrote
Hi,
actually I was thinking that users would press *21*1*number to
forward to , number would be stored to database. For disabling it
could be something like *21*2 , which in that case , the record in
db with the call forwarding option for the user who sent the message
would be deleted. The problem is how do i write and delete in the
usr_preferences table from the ser.cfg file? Of course the users
will also have the option of enabling call forwarding from a web
interface but adding this its much more practical.
K.
On Wednesday 16 November 2005 16:47, you wrote:
If you do a search on the list, I THINK I posted
a way to do call
forwarding (the way I was doing it anyway)... there are likely other ways.
How are you going to take input for the forwarding, though?
Will they dial *21 and it will forward to something they've predefined on a
website somewhere? Will they dial *21 and then the number to which they
want to forward? How do you turn it off? Etc, etc.
N.
On Wed, 16 Nov 2005 16:44:15 +0200, Kyriakos Mavromichalis wrote
> Can someone point me to any resources on how to implement services
> like callforwarding by pressing *21 through the users' UA?
> Basically I need my users to be able to activate different services
> via the phone's keys.
>
> thank you
> --
> Kyriakos Mavromichalis
> Otenet Telecom
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
--
Kyriakos Mavromichalis
Otenet Telecom
16 Nov
16 Nov
6:56 p.m.
New subject: [Serusers] call forwarding and *21
And in fact, not even in the AVP stuff, I've noticed one glaring syntax error...
if(uri =~ "^sip:\*21\*1") should be if(uri =~ "^sip:\*21\*1*")
On Wed, 16 Nov 2005 10:53:25 -0500, sip wrote
THAT'S not too bad.
Basically, what they dial will be the RURI.
So if they dial *21*1*5551212 your SIP RURI becomes
sip:*21*1*5551212@your.server
All you'd need is a check for the URI and then strip out the
unnecessary bits and use something like an AVPop to store the db
info... something like:
(note, I'm just tossing stuff out for an idea... this syntax may be completely
wrong)
if(uri =~ "^sip:\*21\*1")
{
strip(6);
avp_write("$ruri","i:19");
....
avp_db_store("$from/username", "i:19/usr_preferences");
};
Or some such (as I say, I'm playing loose and fast with syntax here)
...
N.
On Wed, 16 Nov 2005 17:30:16 +0200, Kyriakos Mavromichalis wrote
Hi,
actually I was thinking that users would press *21*1*number to
forward to , number would be stored to database. For disabling it
could be something like *21*2 , which in that case , the record in
db with the call forwarding option for the user who sent the message
would be deleted. The problem is how do i write and delete in the
usr_preferences table from the ser.cfg file? Of course the users
will also have the option of enabling call forwarding from a web
interface but adding this its much more practical.
K.
On Wednesday 16 November 2005 16:47, you wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers If you do a search on the list, I THINK I posted
a way to do call
forwarding (the way I was doing it anyway)... there are likely other ways.
How are you going to take input for the forwarding, though?
Will they dial *21 and it will forward to something they've predefined on a
website somewhere? Will they dial *21 and then the number to which they
want to forward? How do you turn it off? Etc, etc.
N.
On Wed, 16 Nov 2005 16:44:15 +0200, Kyriakos Mavromichalis wrote
> Can someone point me to any resources on how to implement services
> like callforwarding by pressing *21 through the users' UA?
> Basically I need my users to be able to activate different services
> via the phone's keys.
>
> thank you
> --
> Kyriakos Mavromichalis
> Otenet Telecom
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
--
Kyriakos Mavromichalis
Otenet Telecom 
17 Nov
17 Nov
1:16 p.m.
New subject: [Serusers] call forwarding and *21
Hey guys,
use sems, sems has support for doing this.. I've done it in sems before.. just write a
small python script that does it, and make the python script update usr_preferences.and
have some avps :-)
-A
On Wed, Nov 16, 2005 at 10:56:07AM -0500, sip wrote:
And in fact, not even in the AVP stuff, I've
noticed one glaring syntax error...
if(uri =~ "^sip:\*21\*1") should be if(uri =~ "^sip:\*21\*1*")
On Wed, 16 Nov 2005 10:53:25 -0500, sip wrote
THAT'S not too bad.
Basically, what they dial will be the RURI.
So if they dial *21*1*5551212 your SIP RURI becomes
sip:*21*1*5551212@your.server
All you'd need is a check for the URI and then strip out the
unnecessary bits and use something like an AVPop to store the db
info... something like:
(note, I'm just tossing stuff out for an idea... this syntax may be completely
wrong)
if(uri =~ "^sip:\*21\*1")
{
strip(6);
avp_write("$ruri","i:19");
....
avp_db_store("$from/username", "i:19/usr_preferences");
};
Or some such (as I say, I'm playing loose and fast with syntax here)
...
N.
On Wed, 16 Nov 2005 17:30:16 +0200, Kyriakos Mavromichalis wrote
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
Hi,
actually I was thinking that users would press *21*1*number to
forward to , number would be stored to database. For disabling it
could be something like *21*2 , which in that case , the record in
db with the call forwarding option for the user who sent the message
would be deleted. The problem is how do i write and delete in the
usr_preferences table from the ser.cfg file? Of course the users
will also have the option of enabling call forwarding from a web
interface but adding this its much more practical.
K.
On Wednesday 16 November 2005 16:47, you wrote:
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers If you do a search on the list, I THINK I posted
a way to do call
forwarding (the way I was doing it anyway)... there are likely other ways.
How are you going to take input for the forwarding, though?
Will they dial *21 and it will forward to something they've predefined on a
website somewhere? Will they dial *21 and then the number to which they
want to forward? How do you turn it off? Etc, etc.
N.
On Wed, 16 Nov 2005 16:44:15 +0200, Kyriakos Mavromichalis wrote
> Can someone point me to any resources on how to implement services
> like callforwarding by pressing *21 through the users' UA?
> Basically I need my users to be able to activate different services
> via the phone's keys.
>
> thank you
> --
> Kyriakos Mavromichalis
> Otenet Telecom
>
> _______________________________________________
> Serusers mailing list
> serusers(a)lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
--
Kyriakos Mavromichalis
Otenet Telecom 
18 Nov
18 Nov
6:33 p.m.
New subject: [Serusers] call forwarding and *21
I have done it with avpops.
User inputs *21*1*number for forwarding to.
First 6 digits get stripped and the rest gets stored in user_preferences.
*21*2 is for dectivation and what it does is that deletes the row from
user_preferences of the user sending the deactivation request.
if(uri =~ "^sip:\*21\*1\*")
{
log(1,"route[3]:Call forwarding activation detected\n");
#check if cf option already exists and delete it
if (avp_db_load("$from/username", "s:callfwd"))
{
log(1,"route[3]:Call forwarding option already exists, deleting it....
\n");
if(!avp_db_delete("$from/username", "s:callfwd/usr_preferences"))
{
sl_send_reply("500", "Server DB error");
}
}
strip(6);
avp_write("$ruri","s:callfwd");
avp_db_store("$from/username", "s:callfwd/usr_preferences");
#replace this with number that points to IVR saying "Service activated"
subst_user('/.*$/22693314/');
route(8);
break;
} else if (uri =~ "^sip:\*21\*2")
{
strip(5);
log(1,"route[3]:Call forwarding cancellation detected\n");
if(!avp_db_delete("$from/username", "s:callfwd/usr_preferences"))
{
sl_send_reply("500", "Server DB error");
}
##replace this with number that points to IVR saying "Service deactivated"
subst_user('/.*$/22693314/');
route(8);
break;
};
thanks for the help!
Kyriakos
On Thursday 17 November 2005 12:16, Atle Samuelsen wrote:
Hey guys,
use sems, sems has support for doing this.. I've done it in sems before..
just write a small python script that does it, and make the python script
update usr_preferences.and have some avps :-)
-A
On Wed, Nov 16, 2005 at 10:56:07AM -0500, sip wrote:
--
Kyriakos Mavromichalis
Otenet Telecom
And in fact, not even in the AVP stuff, I've
noticed one glaring syntax
error...
if(uri =~ "^sip:\*21\*1") should be if(uri =~ "^sip:\*21\*1*")
On Wed, 16 Nov 2005 10:53:25 -0500, sip wrote
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers THAT'S not too bad.
Basically, what they dial will be the RURI.
So if they dial *21*1*5551212 your SIP RURI becomes
sip:*21*1*5551212@your.server
All you'd need is a check for the URI and
then strip out the
unnecessary bits and use something like an AVPop to store the db
info... something like:
(note, I'm just tossing stuff out for an idea... this syntax may be
completely wrong)
if(uri =~ "^sip:\*21\*1")
{
strip(6);
avp_write("$ruri","i:19");
....
avp_db_store("$from/username", "i:19/usr_preferences");
};
Or some such (as I say, I'm playing loose and fast with syntax here)
...
N.
On Wed, 16 Nov 2005 17:30:16 +0200, Kyriakos Mavromichalis wrote
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers Hi,
actually I was thinking that users would press *21*1*number to
forward to , number would be stored to database. For disabling it
could be something like *21*2 , which in that case , the record in
db with the call forwarding option for the user who sent the message
would be deleted. The problem is how do i write and delete in the
usr_preferences table from the ser.cfg file? Of course the users
will also have the option of enabling call forwarding from a web
interface but adding this its much more practical.
K.
On Wednesday 16 November 2005 16:47, you wrote:
> If you do a search on the list, I THINK I posted a way to do call
> forwarding (the way I was doing it anyway)... there are likely
> other ways. How are you going to take input for the forwarding,
> though?
>
> Will they dial *21 and it will forward to something they've
> predefined on a website somewhere? Will they dial *21 and then the
> number to which they want to forward? How do you turn it off? Etc,
> etc.
>
> N.
>
>
> On Wed, 16 Nov 2005 16:44:15 +0200, Kyriakos Mavromichalis wrote
>
> > Can someone point me to any resources on how to implement
> > services like callforwarding by pressing *21 through the users'
> > UA? Basically I need my users to be able to activate different
> > services via the phone's keys.
> >
> > thank you
> > --
> > Kyriakos Mavromichalis
> > Otenet Telecom
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers(a)lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
--
Kyriakos Mavromichalis
Otenet Telecom
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6:56 p.m.
New subject: [Serusers] call forwarding and *21
Looks good, Kyriakos!
N.
On Fri, 18 Nov 2005 17:33:54 +0200, Kyriakos Mavromichalis wrote
I have done it with avpops.
User inputs *21*1*number for forwarding to.
First 6 digits get stripped and the rest gets stored in user_preferences.
*21*2 is for dectivation and what it does is that deletes the row
from user_preferences of the user sending the deactivation request.
if(uri =~ "^sip:\*21\*1\*")
{
log(1,"route[3]:Call forwarding activation detected\n");
#check if cf option already exists and delete it
if (avp_db_load("$from/username", "s:callfwd"))
{
log(1,"route[3]:Call forwarding option already exists, deleting it....
\n");
if(!avp_db_delete("$from/username",
"s:callfwd/usr_preferences"))
{
sl_send_reply("500", "Server DB error");
}
}
strip(6);
avp_write("$ruri","s:callfwd");
avp_db_store("$from/username", "s:callfwd/usr_preferences");
#replace this with number that points to IVR saying "Service activated"
subst_user('/.*$/22693314/');
route(8);
break;
} else if (uri =~ "^sip:\*21\*2")
{
strip(5);
log(1,"route[3]:Call forwarding cancellation detected\n");
if(!avp_db_delete("$from/username", "s:callfwd/usr_preferences"))
{
sl_send_reply("500", "Server DB error");
}
##replace this with number that points to IVR saying "Service deactivated"
subst_user('/.*$/22693314/');
route(8);
break;
};
thanks for the help!
Kyriakos
On Thursday 17 November 2005 12:16, Atle Samuelsen wrote:
Hey guys,
use sems, sems has support for doing this.. I've done it in sems before..
just write a small python script that does it, and make the python script
update usr_preferences.and have some avps :-)
-A
On Wed, Nov 16, 2005 at 10:56:07AM -0500, sip wrote:
--
Kyriakos Mavromichalis
Otenet Telecom
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers And in fact, not even in the AVP stuff, I've
noticed one glaring syntax
error...
if(uri =~ "^sip:\*21\*1") should be if(uri =~ "^sip:\*21\*1*")
On Wed, 16 Nov 2005 10:53:25 -0500, sip wrote
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers THAT'S not too bad.
Basically, what they dial will be the RURI.
So if they dial *21*1*5551212 your SIP RURI becomes
sip:*21*1*5551212@your.server
All you'd need is a check for the URI and
then strip out the
unnecessary bits and use something like an AVPop to store the db
info... something like:
(note, I'm just tossing stuff out for an idea... this syntax may be
completely wrong)
if(uri =~ "^sip:\*21\*1")
{
strip(6);
avp_write("$ruri","i:19");
....
avp_db_store("$from/username", "i:19/usr_preferences");
};
Or some such (as I say, I'm playing loose and fast with syntax here)
...
N.
On Wed, 16 Nov 2005 17:30:16 +0200, Kyriakos Mavromichalis wrote
> Hi,
> actually I was thinking that users would press *21*1*number to
> forward to , number would be stored to database. For disabling it
> could be something like *21*2 , which in that case , the record in
> db with the call forwarding option for the user who sent the message
> would be deleted. The problem is how do i write and delete in the
> usr_preferences table from the ser.cfg file? Of course the users
> will also have the option of enabling call forwarding from a web
> interface but adding this its much more practical.
>
> K.
>
> On Wednesday 16 November 2005 16:47, you wrote:
> > If you do a search on the list, I THINK I posted a way to do call
> > forwarding (the way I was doing it anyway)... there are likely
> > other ways. How are you going to take input for the forwarding,
> > though?
> >
> > Will they dial *21 and it will forward to something they've
> > predefined on a website somewhere? Will they dial *21 and then the
> > number to which they want to forward? How do you turn it off? Etc,
> > etc.
> >
> > N.
> >
> >
> > On Wed, 16 Nov 2005 16:44:15 +0200, Kyriakos Mavromichalis wrote
> >
> > > Can someone point me to any resources on how to implement
> > > services like callforwarding by pressing *21 through the users'
> > > UA? Basically I need my users to be able to activate different
> > > services via the phone's keys.
> > >
> > > thank you
> > > --
> > > Kyriakos Mavromichalis
> > > Otenet Telecom
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers(a)lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
>
> --
> Kyriakos Mavromichalis
> Otenet Telecom
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
_______________________________________________
Serusers mailing list
serusers(a)lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers
6931
days inactive
6933
days old
4 comments
3 participants
participants (3)
-
Atle Samuelsen -
Kyriakos Mavromichalis -
sip