[Serusers] SER with eyeBeam.

List overview All Threads
Download

newer

older

[Serusers] Where can I get serweb

[Serusers] auth_db in dev12 is...

Mr architect

29 Oct 2004 29 Oct '04

11 a.m.

I trying to get eyeBeam or Xpro work with SER, but with little luck. What is the format of the URI you use for calling is it. Is it

SIP:username@domain.com

SIP:username@sipserver.domain.com

I am running on a internal LAN where I have domain configured specificall to have this setup going. SER runs on RHL and Xpro runs on winXP

Any pointers will greatly help.

Thanks,

Santosh Ahuja

Show replies by date

Atle Samuelsen

29 Oct 29 Oct

11:38 a.m.

I've run eyeBeam .. and it works like a charm :D

-Atle

* Mr architect Techarchitect@gmail.com [041029 13:01]:

...

I trying to get eyeBeam or Xpro work with SER, but with little luck. What is the format of the URI you use for calling is it. Is it

SIP:username@domain.com

OR

SIP:username@sipserver.domain.com

I am running on a internal LAN where I have domain configured specificall to have this setup going. SER runs on RHL and Xpro runs on winXP

Any pointers will greatly help.

Thanks,

Santosh Ahuja

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

Steve Blair

11:59 a.m.

Atle:

I have eyeBeam too. It and Xten-Pro work but seem to have a built in timer that will disconnect (timeout) after 30 seconds. This is a major problem right now for users who wish to call out to the PSTN. No other hard phone or soft client we are using has this problem. Have you seen this? Do you have any suggestions where to look for timer settings?

Thanks,Steve

Atle Samuelsen wrote:

...

I've run eyeBeam .. and it works like a charm :D

-Atle

Mr architect Techarchitect@gmail.com [041029 13:01]:

...
I trying to get eyeBeam or Xpro work with SER, but with little luck. What is the format of the URI you use for calling is it. Is it

SIP:username@domain.com

OR

SIP:username@sipserver.domain.com

I am running on a internal LAN where I have domain configured specificall to have this setup going. SER runs on RHL and Xpro runs on winXP

Any pointers will greatly help.

Thanks,

Santosh Ahuja

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104 voice: 215-573-8396 215-746-7903 fax: 215-898-9348 sip:blairs@net.isc.upenn.edu (8 rings for vm)

Atle Samuelsen

12:12 p.m.

Hi Steve.

I have'nt had any problems with eyeBeam, exept some minor bugs with video..

Make a ngrep of what happens, and see if you can see anything intresting :D

-Atle

* Steve Blair blairs@isc.upenn.edu [041029 13:59]:

...

Atle:

I have eyeBeam too. It and Xten-Pro work but seem to have a built in timer that will disconnect (timeout) after 30 seconds. This is a major problem right now for users who wish to call out to the PSTN. No other hard phone or soft client we are using has this problem. Have you seen this? Do you have any suggestions where to look for timer settings?

Thanks,Steve

Atle Samuelsen wrote:

...
I've run eyeBeam .. and it works like a charm :D

-Atle

Mr architect Techarchitect@gmail.com [041029 13:01]:

...
I trying to get eyeBeam or Xpro work with SER, but with little luck. What is the format of the URI you use for calling is it. Is it

SIP:username@domain.com

OR

SIP:username@sipserver.domain.com

I am running on a internal LAN where I have domain configured specificall to have this setup going. SER runs on RHL and Xpro runs on winXP

Any pointers will greatly help.

Thanks,

Santosh Ahuja

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

--

ISC Network Engineering The University of Pennsylvania 3401 Walnut Street, Suite 221A Philadelphia, PA 19104

voice: 215-573-8396
  215-746-7903
fax: 215-898-9348

sip:blairs@net.isc.upenn.edu (8 rings for vm)

Jan Ruzicka

12:13 p.m.

I have seen this 30s problem when ACK does not arrived. Jan Steve Blair wrote:

...

Atle:

I have eyeBeam too. It and Xten-Pro work but seem to have a built in timer that will disconnect (timeout) after 30 seconds. This is a major problem right now for users who wish to call out to the PSTN. No other hard phone or soft client we are using has this problem. Have you seen this? Do you have any suggestions where to look for timer settings?

Thanks,Steve

Atle Samuelsen wrote:

...
I've run eyeBeam .. and it works like a charm :D

-Atle

Mr architect Techarchitect@gmail.com [041029 13:01]:

...
I trying to get eyeBeam or Xpro work with SER, but with little luck. What is the format of the URI you use for calling is it. Is it

SIP:username@domain.com

OR

SIP:username@sipserver.domain.com

I am running on a internal LAN where I have domain configured specificall to have this setup going. SER runs on RHL and Xpro runs on winXP

Any pointers will greatly help.

Thanks,

Santosh Ahuja

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

Serusers mailing list serusers@lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

-- ------------------------------------------------------------------- Ing. Jan Ruzicka CESNET z. s. p. o. tel: +420234680499 Zikova 4 e-mail,sip: janru@cesnet.cz 160 00 Praha 6 icq:151316768 Czech Republic -------------------------------------------------------------------

7477

Age (days ago)

7477

Last active (days ago)

sr-users@lists.kamailio.org

4 comments

4 participants

tags (0)

participants (4)

Atle Samuelsen
Jan Ruzicka
Mr architect
Steve Blair