Hi all,

Here is my ser.cg file. I try to configure send IM, Missed calls, Voicemail. I just can configure Send IM.

Anybody could help me to configure the others functions (problem with logic !!).

harry Regards

# # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $ # # simple quick-start config script #

# ----------- global configuration parameters ------------------------

#debug=3 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode debug=7 fork=no log_stderror=yes */

check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.1 port=5060 children=4 fifo="/tmp/ser_fifo" fifo_mode=0666 # ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/msilo.so" loadmodule "/usr/lib/ser/modules/acc.so"

# Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters --------------- # -- usrloc params --

#modparam("usrloc", "db_mode", 0)

# Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("usrloc", "db_mode", 2) modparam("usrloc", "use_domain", 1)

# -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password")

# -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1)

# --registrar params-- modparam("registrar", "use_domain", 1)

# --domain params-- modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser") modparam("domain", "db_mode", 1) # Use chaching

# --acc params-- #modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser") #modparam("acc", "db_missed_flag", 3)

# --msilo params-- modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser") modparam("msilo", "db_table", "silo") modparam("msilo","registrar","sip:registrar@192.168.0.1")

# ------------------------- request routing logic -------------------

# main routing logic

route{

# initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); break; };

# we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); break; }; setflag(3); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (is_from_local()) {

if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication if (!www_authorize("", "subscriber")) { www_challenge("", "0"); break; };

save("location"); # MSILO - dumping user's offline messages if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; break; };

# native SIP destinations are handled using our USRLOC DB lookup("aliases"); if (!lookup("location")) { if (! t_newtran()) { sl_reply_error(); break; }; # we do not care about anything else but MESSAGEs if (!(method=="MESSAGE")) { if (!t_reply("404", "Not found")) { sl_reply_error(); }; break; }; log("MESSAGE received -> storing using MSILO\n"); # MSILO - storing as offline message if (m_store("0")) { log("MSILO: offline message stored\n"); if (!t_reply("202", "Accepted")) { sl_reply_error(); }; }else{ log("MSILO: offline message NOT stored\n"); if (!t_reply("503", "Service Unavailable")) { sl_reply_error(); }; }; break; }; # if the downstream UA does not support MESSAGE requests # go to failure_route[1] t_on_failure("1"); t_relay(); break; };

if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { route(2); t_relay(); break; };

# forward to current uri now; use stateful forwarding; that # works reliably even if we forward from TCP to UDP if (!t_relay()) { sl_reply_error(); };

}

failure_route[1] { # forwarding failed -- check if the request was a MESSAGE if (!method=="MESSAGE") { break; }; log(1,"MSILO: the downstream UA does not support MESSAGE requests ...\n"); # we have changed the R-URI with the contact address -- ignore it now if (m_store("1")) { log("MSILO: offline message stored\n"); t_reply("202", "Accepted for delivery"); }else{ log("MSILO: offline message NOT stored\n"); t_reply("503", "Service Unavailable"); }; }

route[2] { # non-Voip -- just send "off-line" if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) { sl_send_reply("404", "Not Found"); break; }; if (t_newtran()) { t_reply("404", "Not Found"); acc_db_request("404 missed call", "missed_calls");

}; }