1 Apr
2016
1 Apr
'16
10:07 p.m.
Hello, *Olle!*
*Thanks for your help in this case, and don't worry about the time
(actually I wasn't even expecting to get an answer today).*
*I know the max_contacts parameter. But the problem is that if I set the
max_contacts to 2, when the user tries to register again, he gets an error
message 503. The point is that I want to get the user registered, and
replace the oldest location entry for the newest one.*
*Bruno Emer*
Mobile: +55 11 96540-0044
email: brunoemer(a)gmail.com
2016-04-01 16:31 GMT-03:00 Bruno Emer <brunoemer(a)gmail.com>om>:
Hello all.
I have problem here and I tried to find a solution and search over
internet, but without success.
My scenario is the following: I have an application that must be
registered in Kamailio when a user logs in the web interface, so he can get
calls (something like a web softphone using webrtc). At this point, we are
OK, and everything is working fine.
To get these register functions I am using the parameter
"save("location",
"0x04")" as described in the REGISTRAR module documentation, so if a user
logs in another web browser or computer, only the last one will continue
registered and all calls will be forwarded to him.
The point is that now we are creating a phone app that will do almost the
same thing as the web interface, allowing users to receive calls using the
mobile device, and here is my problem: I want to allow my users to be
registered on two devices at the same time, but if a user logs into another
device, I don't want to reply with a 503. I want to allow the user to
register again, deregistering the oldest contact.
I saw that there is a module named "ims_usrloc_scscf" and on its
description it says "implemented overwrite oldest contact behaviour", but
I couldn't find any documentation about it.
So, is there a way to get this working today?
*Bruno Emer*
Mobile: +55 11 96540-0044
email: brunoemer(a)gmail.com
1 Apr
1 Apr
10:12 p.m.
New subject: Multiple Registrations - Overwrite oldest contact
On 01 Apr 2016, at 22:07, Bruno Emer
<brunoemer(a)gmail.com> wrote:
Hello, Olle!
Thanks for your help in this case, and don't worry about the time (actually I
wasn't even expecting to get an answer today).
I know the max_contacts parameter. But the problem is that if I set the max_contacts to
2, when the user tries to register again, he gets an error message 503. The point is that
I want to get the user registered, and replace the oldest location entry for the newest
one.
THen you need to check the parameters to the save() command on the same
documentation page:
"
0x04 - store and maintain one contact per AoR. If there are other contact addresses for
AoR not matching current registration, remove them. This mode ensures one contact per AoR
(user).
“
/O
Bruno Emer
Mobile: +55 11 96540-0044
email: brunoemer(a)gmail.com <mailto:brunoemer@gmail.com>
2016-04-01 16:31 GMT-03:00 Bruno Emer <brunoemer(a)gmail.com
<mailto:brunoemer@gmail.com>>:
Hello all.
I have problem here and I tried to find a solution and search over internet, but without
success.
My scenario is the following: I have an application that must be registered in Kamailio
when a user logs in the web interface, so he can get calls (something like a web softphone
using webrtc). At this point, we are OK, and everything is working fine.
To get these register functions I am using the parameter "save("location",
"0x04")" as described in the REGISTRAR module documentation, so if a user
logs in another web browser or computer, only the last one will continue registered and
all calls will be forwarded to him.
The point is that now we are creating a phone app that will do almost the same thing as
the web interface, allowing users to receive calls using the mobile device, and here is my
problem: I want to allow my users to be registered on two devices at the same time, but if
a user logs into another device, I don't want to reply with a 503. I want to allow the
user to register again, deregistering the oldest contact.
I saw that there is a module named "ims_usrloc_scscf" and on its description it
says "implemented overwrite oldest contact behaviour", but I couldn't find
any documentation about it.
So, is there a way to get this working today?
Bruno Emer
Mobile: +55 11 96540-0044 <tel:%2B55%2011%2096540-0044>
email: brunoemer(a)gmail.com <mailto:brunoemer@gmail.com>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
10:18 p.m.
New subject: Multiple Registrations - Overwrite oldest contact
This is my problem... I want to have 2 contacts for AOR, and not only one.
When the 3rd arrives, it must remove the oldest and continue with 2...
*If I am using the 0x04 parameter, it will save just one contact, and the
user will not be able to get the Invite both, in the mobile device and web
interface.*
*Bruno Emer*
Mobile: +55 11 96540-0044
email: brunoemer(a)gmail.com
<https://www.facebook.com/bruno.emer.5>
<https://www.linkedin.com/profile/view?id=86461237&trk=spm_pic>
<https://twitter.com/brunoemer_>
<https://www.flickr.com/photos/122070309@N03/>
<http://google.com/+BrunoEmer> <http://instagram.com/brunoemer_>
2016-04-01 17:07 GMT-03:00 Bruno Emer <brunoemer(a)gmail.com>om>:
Hello, *Olle!*
*Thanks for your help in this case, and don't worry about the time
(actually I wasn't even expecting to get an answer today).*
*I know the max_contacts parameter. But the problem is that if I set the
max_contacts to 2, when the user tries to register again, he gets an error
message 503. The point is that I want to get the user registered, and
replace the oldest location entry for the newest one.*
*Bruno Emer*
Mobile: +55 11 96540-0044
email: brunoemer(a)gmail.com
2016-04-01 16:31 GMT-03:00 Bruno Emer <brunoemer(a)gmail.com>om>:
Hello all.
I have problem here and I tried to find a solution and search over
internet, but without success.
My scenario is the following: I have an application that must be
registered in Kamailio when a user logs in the web interface, so he can get
calls (something like a web softphone using webrtc). At this point, we are
OK, and everything is working fine.
To get these register functions I am using the parameter
"save("location", "0x04")" as described in the REGISTRAR
module
documentation, so if a user logs in another web browser or computer, only
the last one will continue registered and all calls will be forwarded to
him.
The point is that now we are creating a phone app that will do almost the
same thing as the web interface, allowing users to receive calls using the
mobile device, and here is my problem: I want to allow my users to be
registered on two devices at the same time, but if a user logs into another
device, I don't want to reply with a 503. I want to allow the user to
register again, deregistering the oldest contact.
I saw that there is a module named "ims_usrloc_scscf" and on its
description it says "implemented overwrite oldest contact behaviour",
but I couldn't find any documentation about it.
So, is there a way to get this working today?
*Bruno Emer*
Mobile: +55 11 96540-0044
email: brunoemer(a)gmail.com
10:31 p.m.
New subject: Multiple Registrations - Overwrite oldest contact
That requires a bit more of reading the same doc page, but I still think you can do it.
Run reg_fetch_contacts and check how many you have. Loop through them and unregister by
the ruri (id) of the one that expires first
if you have too many.
We’ve made this function to make the location database handling very transparent to the
script writer that wants to go beyond
the ordinary and do some fun scripting :-)
http://kamailio.org/docs/modules/devel/modules/registrar.html#registrar.f.r…
http://kamailio.org/docs/modules/devel/modules/registrar.html#registrar.f.u…
Kamailio is cool, isn’t it? :-)
/O
On 01 Apr 2016, at 22:18, Bruno Emer
<brunoemer(a)gmail.com> wrote:
This is my problem... I want to have 2 contacts for AOR, and not only one.
When the 3rd arrives, it must remove the oldest and continue with 2...
If I am using the 0x04 parameter, it will save just one contact, and the user will not be
able to get the Invite both, in the mobile device and web interface.
Bruno Emer
Mobile: +55 11 96540-0044 <tel:%2B55%2011%2096540-0044>
email: brunoemer(a)gmail.com <mailto:brunoemer@gmail.com>
<https://www.facebook.com/bruno.emer.5>
<https://www.linkedin.com/profile/view?id=86461237&trk=spm_pic>
<https://twitter.com/brunoemer_>
<https://www.flickr.com/photos/122070309@N03/> <http://google.com/+BrunoEmer>
<http://instagram.com/brunoemer_>
2016-04-01 17:07 GMT-03:00 Bruno Emer <brunoemer(a)gmail.com
<mailto:brunoemer@gmail.com>>:
Hello, Olle!
Thanks for your help in this case, and don't worry about the time (actually I
wasn't even expecting to get an answer today).
I know the max_contacts parameter. But the problem is that if I set the max_contacts to
2, when the user tries to register again, he gets an error message 503. The point is that
I want to get the user registered, and replace the oldest location entry for the newest
one.
Bruno Emer
Mobile: +55 11 96540-0044 <tel:%2B55%2011%2096540-0044>
email: brunoemer(a)gmail.com <mailto:brunoemer@gmail.com>
2016-04-01 16:31 GMT-03:00 Bruno Emer <brunoemer(a)gmail.com
<mailto:brunoemer@gmail.com>>:
Hello all.
I have problem here and I tried to find a solution and search over internet, but without
success.
My scenario is the following: I have an application that must be registered in Kamailio
when a user logs in the web interface, so he can get calls (something like a web softphone
using webrtc). At this point, we are OK, and everything is working fine.
To get these register functions I am using the parameter "save("location",
"0x04")" as described in the REGISTRAR module documentation, so if a user
logs in another web browser or computer, only the last one will continue registered and
all calls will be forwarded to him.
The point is that now we are creating a phone app that will do almost the same thing as
the web interface, allowing users to receive calls using the mobile device, and here is my
problem: I want to allow my users to be registered on two devices at the same time, but if
a user logs into another device, I don't want to reply with a 503. I want to allow the
user to register again, deregistering the oldest contact.
I saw that there is a module named "ims_usrloc_scscf" and on its description it
says "implemented overwrite oldest contact behaviour", but I couldn't find
any documentation about it.
So, is there a way to get this working today?
Bruno Emer
Mobile: +55 11 96540-0044 <tel:%2B55%2011%2096540-0044>
email: brunoemer(a)gmail.com <mailto:brunoemer@gmail.com>
_______________________________________________
SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
sr-users(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
2967
days inactive
2967
days old
3 comments
2 participants
participants (2)
-
Bruno Emer -
Olle E. Johansson