7 Apr
2022
7 Apr
'22
1:06 p.m.
Hello Expert,
We faces problem in utilizing lcr command line in "kamctl lcr show_gws",
whereas kamailio version is 5.5.4 which are new kamailio release, "kamctl
lcr show_gws" shown result "command disabled".
in this case, LCR module is already been uploaded and the systemd has been
running well active kamailio.
Could you share, what probably wrong in my kamailio configuration?
Best Regards,
7 Apr
7 Apr
1:16 p.m.
bayu p writes:
We faces problem in utilizing lcr command line in
"kamctl lcr show_gws",
whereas kamailio version is 5.5.4 which are new kamailio release, "kamctl
lcr show_gws" shown result "command disabled".
Read this https://kamailio.org/docs/modules/5.5.x/modules/lcr.html#idm693
-- Juha
2:09 p.m.
That is good news, Juha,
how about kamailio version 5.3.2 ?
i did the same config kamailio 5.5.4, but kamailio 5.3.2 LCR command line
resulting "command disabled"
if I should upgrade kamailio 5.3.2 into 5.5.4, it will take more time and
need more effort to find the upgrade process
Pada tanggal Kam, 7 Apr 2022 pukul 15.19 Juha Heinanen <jh(a)tutpro.com>
menulis:
bayu p writes:
We faces problem in utilizing lcr command line in
"kamctl lcr show_gws",
whereas kamailio version is 5.5.4 which are new kamailio release, "kamctl
lcr show_gws" shown result "command disabled".
Read this https://kamailio.org/docs/modules/5.5.x/modules/lcr.html#idm693
-- Juha
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
* sr-users(a)lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to
the sender!
Edit mailing list options or unsubscribe:
* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
1:24 p.m.
Here detailed screenshot :
[image: image.png]
Pada tanggal Kam, 7 Apr 2022 pukul 15.06 bayu p <bayupmail(a)gmail.com>
menulis:
Hello Expert,
We faces problem in utilizing lcr command line in "kamctl lcr show_gws",
whereas kamailio version is 5.5.4 which are new kamailio release, "kamctl
lcr show_gws" shown result "command disabled".
in this case, LCR module is already been uploaded and the systemd has been
running well active kamailio.
Could you share, what probably wrong in my kamailio configuration?
Best Regards,
760
days inactive
760
days old
4 comments
2 participants
participants (2)
-
bayu p -
Juha Heinanen