Hello Jan, this is: PS: If I try to comment (loadmodule "/usr/local/lib/ser/modules/auth.so") SER don't started... --------------- start here # # $Id: ser.cfg,v 1.12 2002/10/21 02:40:06 jiri Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #!!!!!!!!! next1 loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #!!!!!!!!! next1 #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #!!!!!!!!! next1 modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module #modparam("auth", "secret", "alsdkhglaksdhfkloiwr") #!!!!!!!!! next1 modparam("auth", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) #!!!!!!!!! next1 modparam("auth", "password_column", "password") # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwars==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (len_gt( max_len )) { sl_send_reply("513", "Message too big"); break; }; # Do strict routing if pre-loaded route headers present rewriteFromRoute(); # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #!!!!!!!!! start if (!www_authorize("nectis.net", "subscriber")) { www_challenge("nectis.net", "0"); break; }; #!!!!!!!!! end save("location"); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; # forward to current uri now if (!t_relay()) { sl_reply_error(); }; } ---------------- end here -----Original Message----- From: Jan Janak [mailto:jan@iptel.org] Sent: Monday, May 12, 2003 1:56 PM To: Oleg Ustinov Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] can't register Hello, could you send us message dumps and your configuration file ? Jan. On 12-05 11:53, Oleg Ustinov wrote: Behalf > Of Serge Kravchenko > Sent: Wednesday, April 09, 2003 12:00 PM > To: serusers(a)lists.iptel.org > Subject: [Serusers] can't register > > > hello. > > i've been trying to register to ser with couple of UAs like x10,

> and snom100. > the response is following: > > RECEIVE << ser_ip_address:5060 > SIP/2.0 483 Too Many Hops > Via: SIP/2.0/UDP my_ip_address:5060 > From: <sip:krav@sip.sipuser.com> > To:

> Call-ID: 77FCCA606A8111D7B7A2000021F0A5BA(a)sip.sipuser.com > CSeq: 1788 REGISTER > Server: Sip EXpress router (0.8.10 (i386/freebsd)) > Content-Length: 0 > Warning: 392 212.58.142.4:5060 "Noisy feedback tells: pid=93155 > req_src_ip=ser_ip_address in_uri=sip:sip.sipuser.com > out_uri=sip:sip.sipuser.com via_cnt==12" > > mysql has been installed properly, and i can add subscribers using > serctl...... > i guess there's something wrong with script, which is default, i've

alas,